Prins autogassystemen b.v. Veldhoven

PAGE 5 076/1506600MITSUBISHILANCER 1.6i 16v 2003=>VERSION NR : 1MOUNTING THE INLET MANIFOLD COUPLINGSRemove the petrol rail. Remove the two plastic spacers (not used).Drill the two attachment eyes (8mm) up to 11mm.Remove the o-ring of the injectors. Place a ring and a sealing ring on the injector.Place the vsi injector over the petrol injector with the lpg hoses.Don´t forget the o-ring under the vsi injector before installing the injectorrail back.Mount the petrol rail back and use two spacers (15mm) under the rail attachment.Mount the rail with two M6 bolts.IMPORTANTAlways check the inlet manifold coupling for leakage after installation.Spray brake cleaner onto the couplings and check whether the engine speedand the lambda signal change with the engine running on LPG.spacer