11.07.2015 Views

Download PDF datasheet 509 for Dulux Trade Mordant Solution

Download PDF datasheet 509 for Dulux Trade Mordant Solution

Download PDF datasheet 509 for Dulux Trade Mordant Solution

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Issued 02/14MORDANT SOLUTION<strong>509</strong><strong>Dulux</strong> <strong>Trade</strong> <strong>Mordant</strong> <strong>Solution</strong> chemically etches and prepares the surface of new,bright galvanised metal to provide adhesion <strong>for</strong> subsequent paint systems.KEY BENEFITS• New Galvanised Metal• Chemically Etches Surfaces• Water-BasedPRODUCT INFORMATIONTypical UseSuitable <strong>for</strong> use on new galvanised metal.Pack Size2.5L.Colour RangeBlue/Green Colour in container.Film PropertiesN/A.Composition (nominal)<strong>Solution</strong> of Phosphoric Acid and Copper Salt.Volume SolidsN/A.SURFACE PREPARATIONTo get the best results, ensure surfaces to bepainted are sound, clean and dry (new surfacesparticularly must be fully dry) and free from alldefective or poorly adhering material such as dirt,grease and wax.Degrease where necessary with a suitable oil andgrease remover. Rinse with clean water to removeresidues.Special precautions should be taken during surfacepreparation of pre-1960s paint surfaces over woodand metal as they may contain harmful lead.SYSTEMS INFORMATIONApply a liberal coat of <strong>Dulux</strong> <strong>Trade</strong> <strong>Mordant</strong><strong>Solution</strong> by brush and allow to dry. If the surfacefails to turn black overall, the most likely cause iscontamination of the surface or the presence of afactory applied pretreatment. Rinse the surfacethoroughly and abrade, using a suitable abrasivepaper. Remove all residues and re-apply <strong>Dulux</strong><strong>Trade</strong> <strong>Mordant</strong> <strong>Solution</strong>. Avoid over-application aspooling of the wash will result in the <strong>for</strong>mation of afine brown deposit of copper.After treatment the surface must be rinsed withclean water to remove all residues and thenallowed to dry be<strong>for</strong>e priming.The pre-treated surface should be overcoated withan appropriate <strong>Dulux</strong> <strong>Trade</strong> metal primer within 48hours or be<strong>for</strong>e contamination can recur.APPLICATION METHODBrush only. Do not spray.Practical CoverageN/A.Spray RecommendationsThis product should not be sprayed.Drying TimesN/A.Cleaning UpAfter use, remove as much product as possiblefrom equipment be<strong>for</strong>e cleaning with water.When this paint container is empty please ask yourstockist about recycling. If you have leftover paint,please dispose of it responsibly. Find out more atduluxtrade.co.uk/pp.Transportation & StorageDo not use or store in extremes of temperature andprotect from frost. To prevent spillage, please storeand transport upright.VOCN/A.


<strong>509</strong>MORDANT SOLUTIONFURTHER SUPPORTIf you need further support, please contact the AkzoNobel Technical Advice Centre on 08444 817 818.Always read full Health, Safety & Environmental In<strong>for</strong>mation on can be<strong>for</strong>e use.Safety <strong>datasheet</strong> (SDS <strong>509</strong>) is available free on request by telephoning the AkzoNobel Technical Advice Centreor by visiting duluxtrade.co.uk.AkzoNobel, the AkzoNobel logo, the Flourish logo, <strong>Dulux</strong> <strong>Trade</strong> and the Planet Possible logo are trademarks of the AkzoNobelgroup. © AkzoNobel 2014.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!