C-Bus

Clipsal Integrated SystemsOverviewClipsal ® Australia first started from humble beginnings in1920, with a range of adjustable conduit fittings that ‘clipsall’ sizes of conduit, thus the name Clipsal ® was born. Morethan 85 years on, Clipsal ® has become one of the leadingproducers of electrical products in its field.As a company and brand, Clipsal ® has continuouslydeveloped and evolved to meet the needs of commercialand domestic requirements. Development in automationproducts led to the formation of CIS (Clipsal ® IntegratedSystems) in 2000, a business unit of Clipsal ® Australiaspecialising in the manufacture of electronic lightingand building automation products. Since then CIS hasgrown rapidly, gaining widespread acceptance in majorcommercial and domestic markets. Today CIS employsmore than 250 personnel.Through extensive research and design, CIS developedthe C-Bus ® Energy Management and Control Systemback in 1994, and since then C-Bus ® has become the‘benchmark’ of CIS’ product range. Initially, C-Bus ® wasdesigned and manufactured for commercial application,however, due to increasing worldwide interest, C-Bus ® hasbeen adapted to suit the domestic market with the releaseof C-Bus ® DIN Rail Series and other associated products.With the development of C-Bus ® for domestic application, anew generation of products was born including the SceneMaster ® scene controller, C-Touch colour touch screens,Neo ® C-Bus ® wall switches, and Saturn C-Bus ® wallswitches.CIS continue to set new precedents by expanding theC-Bus ® Range.Introducing products such as C-Bus ®Wireless Technology, Dynamic Labelling Technology,Reflection Series, Saturn Series and Multi-RoomAudio. Not only is the C-Bus ® product range extensive,but it also complies with ISO9001 Accreditation.Initially, as C-Bus ® developed, there was an ongoingconcern in relation to ensuring the end-user would get themost out of every CIS product. So to avoid this problem,CIS began running the CIS Installer Program and InstallerApproval. If a contractor is interested in C-Bus ® installationthey can contact their local Clipsal ® representative whowill arrange for them to attend an introductory course onC-Bus ® . To become an Approved Installer, the contractormust prove themselves in the field. A minimum of threeinstallations must be completed on the same CIS product,and two of the jobs are inspected by CIS. Once the installerhas satisfied the requirements of CIS they are issued witha CIS Approved Installer Card.In conclusion, CIS are continually striving to meet thedemands and requirements of their customers by offeringthe highest quality energy control and managementproducts available on the market. CIS believe that byachieving this they will remain an innovative force behindthe manufacturing of automated electronics.When the C-Bus ® Neo ® range was first launched in 2002,it immediately became the ‘new face’ of Clipsal’s ® C-Bus ®offering. Neo’s ® superb design was one of inspiration, asClipsal ® consulted architects and designers for their input,to create a switch that complimented the beautiful homeenvironment. The Saturn Range of switches is also areal ‘head turner’. Manufactured from handcrafted glasswith bevelled edges, and apertures cut for its distinctivecircular, backlit switches.The year the Neo ® Range was launched it won theAustralian Electrical and Electronic Manufacturer’sAssociation (AEEMA) Award for Excellence inCommercialising Research & Development. In the sameyear, C-Bus ® took on the best of European technology towin the 2002 UK Electrical Product Award in the categoryof Contribution Towards Energy Saving.This was a significant achievement against otherestablished brands. C-Bus ® really proved its worthover competitor’s technology based on proven IP(intellectual property), superior performance, featuresand customer value.C-Bus ® Product Overview

ContentsClipsal C-Bus ® Overview466C-Bus ® Input UnitsWall SwitchesGeneral Input UnitsPassive Infra-red Motion Sensors2021Scene Controllers2428Infra-red Receivers3440Touch ScreensC-Bus ® Output UnitsDimmersInfra-red Output Units30344248Relay UnitsC-Bus ® System Units and Accessories525866C-Bus ® SoftwareMulti-Room Audio SystemC-Bus ® Schematics

Typical C-Bus ® Network layoutTypical C-Bus ® wiring schematics are shown on pages 66-67

C-Bus ®Input UnitsWall SwitchesDynamic Labelling TechnologyDLT - Saturn - square series• Available in Saturn and Neo ® styles• Saturn units feature an impact resistant glass fascia• Saturn units available in square and rectangular series inwhite, black, cream and mid-brown• Neo units available in square and rectangular series in Neogrey with brushed aluminium look inner surround• Rectangular series units incorporate eight buttons for C-Bus ®Group/Scene over two pages (four buttons per page)E5084DL,GFWall switch 4 button,DLT, white• Square series units incorporate eight buttons for C-Bus ®Group/Scene over three pages• Page/scroll button• Each button can be programmed with on, off, toggle, dimmer,timer, scene control and custom functions• LCD labelling for each button• Text, sliders and bitmaps can be defined and downloaded tothe unit via a C-Bus ® network.E5084DL-680Wall switch 4 button,DLT, black• Dimmable blue LED on each button• Nightlight on all buttons or just the bottom button• 64 x 128 pixel LCD screen• Dimmable white LED backlighting for the LCD• Ignore first button press option• Fallback to page 1 option• Real time clock display• Programmed via C-Bus ® Toolkit softwareE5084DL-380Wall switch 4 button,DLT, cream• Draws 22mA from the C-Bus ® network• C-Bus ® learn enabled.E5084DL-780Wall switch 4 button,DLT, mid-brownC-Bus ® Product Overview

DLT -Saturn - rectangular seriesE5054DLDLT - Neo® - square series5085DL,GFWall switch 5 button,DLT, whiteWall switch 4 button, DLTDLT - Neo® - rectangular series5085DL-680Wall switch 5 button,DLT, black5055DLWall switch 5 button, DLTDLT - Accessories5085DL-380Wall switch 5 button,DLT, creamE5050MFWall bracket for squareDLT wall switch5085DL-780Wall switch 5 button,DLT, mid-brownE157Wall box for square DLTwall switch

C-Bus ®Input UnitsWall SwitchesSaturn C-Bus ® Wall SwitchesSaturn -square series• Available in square or rectangular series• Colours available white, black, cream and mid-brown• Impact resistant glass fascia• 2, 4 or 6 buttons per wall switch• Programmable as on, off, toggle, dimmer, timer, scene controland custom functions• Selectable blue and orange LED indicator on each buttonconfigured through C-Bus ® Toolkit software• LED button indicators provide illumination andstatus feedback• Nightlight feature• Fall back level option to dim indicators at a set time after thelast button press• Mounted using standard mounting accessories(ordered separately)• Programmed via Learn Mode or the C-Bus ® Toolkit software• Draws 22mA from the C-Bus ® network• C-Bus ® Learn Enabled.E508xNL,GFWall switch,square, whiteE508xNL-680Wall switch,square, blackE508xNL-380Wall switch,square, creamE508xNL-780Wall switch,square, mid-brown‘x’ denotes number of buttons i.e. 2, 4 or 6 buttonC-Bus ® Product Overview

Saturn -rectangular seriesSaturn- accessories508xNL,GFWall switch,rectangular, white5080LC-8Pre-labelled button capsindividually printed withcommonly used labels(pack of 66)508xNL-680Wall switch,rectangular, blackE5050MFWall bracket forsquare series508xNL-380Wall switch,rectangular, creamE157Wall box forsquare series508xNL-780Wall switch,rectangular, mid-brown‘x’ denotes number of buttons i.e. 2, 4 or 6 button

C-Bus ®Input UnitsWall SwitchesSaturn -Glass Facias - square seriesSaturn -Glass Facias - rectangular seriesE508xF,GFGlass facia only, square, white508xF,GFGlass facia only,rectangular, whiteE508xF-30Glass facia only, square, cream508xF-30Glass facia only,rectangular, creamE508xF-60Glass facia only, square, black508xF-60Glass facia only,rectangular, blackE508xF-70Glass facia only, square, mid-brown508xF-70Glass facia only,rectangular, mid-brown10‘x’ denotes number of buttons i.e. 2, 4 or 6 button‘x’ denotes number of buttons i.e. 2, 4 or 6 buttonC-Bus ® Product Overview

C-Bus ®Input UnitsWall SwitchesNeo ® C-Bus ® Wall SwitchesNeo ® -square series• Architecturally designed, modular C-Bus ® wall switches• Available in two distinct styles (square and rectangular)• Optional rocker cover with ID window for labelling of buttons(ordered separately)• Backlight for ID windows• 2, 4 or 8 buttons per wall switchE5052NLWall switch 2 gang• Integral infrared receiving window• Programmed via C-Bus ® installation software or via the learnmode features• Programmed as dimmers, timers, on/off toggle switches andscene switches (up to 4 scenes per unit)• Selectable blue and orange button LEDs configured throughC-Bus ® Installation Software• Available as standard in Grey/Silver, White Electric (WE),Cream (CM), Desert Sand (DS), Soft Grey (SG), Black (BK)and Brown (BR)• Night-light feature• Rectangular versions use standard Australian mountingbrackets and wall boxes. Square version requires brackets /wall boxes as shownE5054NLWall switch 4 gang• Units draw 22mA from a C-Bus ® network• C-Bus ® Learn Enabled.E5058NLWall switch 8 gang12See page 56-57 for Neo ® colour options.C-Bus ® Product Overview

C-Bus ®Input UnitsWall SwitchesNeo ® -parts packE5050ISInner surround, square series,(pack of 5)5050ISInner surround,rectangular series,(pack of 5)Available in the following coloursWhiteBrushed AluminiumBlackBrownCreamDessert SandGoldSoft GreyAvailable in the following coloursWhiteBrushed AluminiumBlackBrownCreamDessert SandGoldSoft Grey14C-Bus ® Product Overview

E5050OSOuter surround, square,(pack of 5)5052NRPRocker covers and spacersfor E5052NL and 5052NLseries, (pack of 5 rockerswitch covers and10 spacers)Available in the following coloursWhiteBlackBrownCreamDessert SandSoft GreyBattleship Grey5054NRPRocker covers and spacersfor E5054NL and 5054NLseries, (pack of 10 rockerswitch covers and10 spacers)5050OSOuter surround,rectangular series,(pack of 5)5058NRPRocker covers forE5058NL and 5058NLseries, (pack of 20)Available in the following coloursWhiteBlackBrownCreamDessert SandSoft GreyBattleship GreyAvailable in the following coloursWhiteBlackBrownCreamDessert SandSoft GreyBattleship Grey15

C-Bus ®Input UnitsWall SwitchesReflection C-Bus ® WallSwitchesReflection• Architectural, flat stainless steel C-Bus ® wall switches• No visible screws• 1, 2, 3, 4, 6 or 8 buttons per wall switch• Available in brushed stainless steelR5061NLWall switch 1 gang• Each button has an associated blue LED indicator providingfeedback status• Programmed as dimmers, timers, on/off toggle switches andscene switches (up to 4 scenes per unit)• Programmed via C-Bus ® installation software or via the learnmode features• A custom wall box is required to mount this switch, standardwall brackets and boxes can not be used• Units draw 22mA from a C-Bus ® networkR5062VNLWall switch 2 gang• C-Bus ® Learn Enabled.R5063NLWall switch 3 gangR5064VNLWall switch 4 gang16C-Bus ® Product Overview

R5066NLWall switch, 6 gang2000 Series C-Bus ®Wall Switches5031NLWall switch, 1 gang, rectangular5032NLWall switch, 2 gang, rectangular5034NLWall switch, 4 gang, rectangularE5031NLWall switch, 1 gang, squareE5032NLWall switch, 2 gang, squareE5034NLWall switch, 4 gang, square5031NLE5031NL• May be programmed as dimmers, timers and on/offtoggle switchesR5068NLWall switch, 8 gangReflection - accessoriesR5060WBWallbox to suit Reflectionrange of wall switchesImportant note: This wall box must beused to install Reflection Wall switches• 1, 2 or 4 buttons per wall switch• Each unit features a programmable status indicator• Available in a wide range of colours (See page 57 forcolour options)• Units draw 18mA from a C-Bus ® network• C-Bus ® Learn EnabledClassic C2000 Series C-Bus ®Wall SwitchesC5031NLWall switch, 1 gangC5032NLWall switch, 2 gangC5034NLWall switch, 4 gangC5031NL• May be programmed as dimmers, timers and on/offtoggle switches• 1, 2 or 4 buttons per wall switch• Each unit features a programmable status indicator• Available in a wide range of colours (See page 57 forcolour options)• Units draw 18mA from a C-Bus ® network• C-Bus ® Learn Enabled17

C-Bus ®Input UnitsWall SwitchesSlimline SC2000 Series C-Bus ®Wall SwitchesSC5031NL Wall switch 1 gang, orange LEDSC5032NL Wall switch 2 gang, orange LEDSC5034NL Wall switch 4 gang, orange LEDSC5031NLB Wall switch 1 gang, blue LEDSC5032NLB Wall switch 2 gang, blue LEDSC5034NLB Wall switch 4 gang, blue LED• May be programmed as dimmers, timers andon/off toggle switches• 1, 2 or 4 buttons per wall switch• Each button features a programmable LED status indicator• Available in a wide range of colours(See page 57 for colour options)• Units draw 18mA from a C-Bus ® network• C-Bus ® Learn Enabled.SC5031NLEclipse ® SL2000 Series C-Bus ®Wall SwitchesSL5031NL Wall switch 1 gang, orange LEDSL5032NL Wall switch 2 gang, orange LEDSL5034NL Wall switch 4 gang, orange LEDSL5031NLBWall switch 1 gang, blue LEDSL5032NLB Wall switch 2 gang, blue LEDSL5034NLB Wall switch 4 gang, blue LED• May be programmed as dimmers, timers andon/off toggle switches• 1, 2 or 4 buttons per wall switch• Each button features a programmable LEDstatus indicator• Available in a wide range of colours(See page 57 for colour options)• Units draw 18mA from a C-Bus ® network• C-Bus ® Learn Enabled.SL5031NLMetal Plate and Multi-GangC-Bus ® Wall Switches• May be programmed as dimmers, timers and on/offtoggle switches• Each button features a programmable LED status indicator• Available in stainless steel and brass finishes• The button dollies are available in White, Black or Brown• The B style metal plate range is available in up to 132gang configuration• Wall boxes are supplied when ordering 8 gang orhigher configurations• Contact Clipsal when ordering above 24 gang• Each 4 gang unit array draws 18mA from a C-Bus ® network• C-Bus ® Learn Enabled.‘A’ Style Deep Curved Plate- stainless steelA5031NLWall switch 1 gangA5032NLWall switch 2 gangA5034NLWall switch 4 gang‘B’ Style Flat Plate- stainless steelB5031NLWall switch 1 gangB5032NLWall switch 2 gangB5034NLWall switch 4 gangA5032NLB5032NL18C-Bus ® Product Overview

C-Bus ®Input UnitsGeneral Input UnitsPassive InfaredMotion Detectors cont.Light Level Sensor5753LOccupancy sensor,infra-red, indoor, flush mount,360 degree• 360 degree, flush, ceilingmount PIR motion sensor• suitable for indoor use• The unit has a coverage range of 6m x 6m and a field ofview of 90 degrees• The unit features a light threshold adjustment on the unit• The time delay is programmable in the range 1 second to18 hours• Features a Sunset Switch program• Units draw 18mA from a C-Bus ® network• C-Bus ® Learn Enabled.5753PEIRLMultisensor, combinedoccupancy sensor, lightlevel sensor and IR receiver• Flush mount design with 360degree detection pattern• Capable of controlling up to 8 C-Bus ® Scenes or 8 C-Bus ®Group Addresses• Supports the ‘Corridor Linking’ feature for commercialbuilding applications• Three LEDs indicate a range of actions from movement, tothe receiving of IR commands and the device’s status• Light and PIR sensitivity are set via adjustment screwslocated on the sensor unit• Dual element detectors minimise false triggering• Refer to 5753PEIRL Installation Instruction for location andmounting details• An LED status indicator on the unit is used to report thecurrent state of the load controlling device• Unit draws 18mA from a C-Bus ® network• C-Bus ® Learn Enabled.5031PELight level sensor, 40 - 1600lux 5031PEE5031PELight level sensor, 40 - 1600lux, British style• Used to measure and regulate lighting in the range of40 - 1600lux• Programmable target light level as well as the marginon installation• Each unit features a programmable status indicator• Can be used to achieve bank switching orcontinuous dimming• Units draw 18mA from a C-Bus ® network.Temperature Sensor5031TSTemperature sensor,0 - 50 degrees centigradeE5031TSTemperature sensor,0 - 50 degrees centigrade,British style• Used to measure and regulate either heating or coolingin the range 0 - 50 degrees centigrade• Programmable target temperature and marginon installation• Programmable set back temperature for when the roomis unoccupied• Units draw 18mA from a C-Bus ® network.5031TSE5031PEE5031TS22C-Bus ® Product Overview

Single Zone Thermostat5070THBRC-Bus ® thermostat,programmable, single zone with5 relays (relays for HVAC plantcontrol only, not accessibile viaC-Bus ® )4 Zone Thermostatwith programmabletime scheduling5070THPRC-Bus ® thermostat,programmable, 4 zone, with 5Relays (relays for HVAC plantcontrol only, not accessible viaC-Bus ® )5070THBC-Bus ® thermostat,programmable, single zone,no on board HVAC plantcontrol relays5070THPC-Bus ® thermostat,programmable, 4 zone,no on board HVAC plantcontrol relays• Single zone C-Bus ® thermostat• Wall Mounted• Dimensions 92mm x 127mm x 24mm• Support for control of HVAC units via C-Bus ® or theinternal HVAC relays (‘RWG’ control)• Manually adjustable temperature set point and mode ofoperation (heating, cooling or ventilation)• The unit includes fan speed control and a ‘Setback’ or‘Economy’ Mode• Easy to use operator interface includes an integral LCDto display the current temperature and mode of operation• Draws 40mA from a C-Bus ® network.• Four zone (plus the common zone) programmableC-Bus ® thermostat• Wall mounted• Dimensions 105mm x 149mm x 24mm• Support for control of HVAC units via C-Bus ® or directlyusing on board HVAC relays (RWG control)• Manually adjustable temperature set point, modeof operation (heating, cooling or ventilation) andtime schedules• On board 7 day HVAC time scheduling (userprogrammable), manual fan speed control, andsetback mode• Easy to use interface, comprising of an LCD, manualcontrol buttons and a rotating dial with an integralpress switch• Draws 40mA from a C-Bus ® network.23

C-Bus ® Hand-heldInfra-red Transmitters• Designed for use with C-Bus ® Neo Wall Switches, C-Bus ®Multi Sensor and the 503xNIRL/E503xNIRL serieswall switches• 4 and 8 button version available• Range of up to 15 metres (line of sight)• Features IR Bank selection switch with each group of fourbuttons assigned to either bank A/B bank C/D.• The bank selection is changed by removing theback cover.5084TX4 button C-Bus ® InfaredRemote Control with holder5088TX8 button C-Bus ® InfaredRemote Controlwith holder5080TXCC-Bus ® RemoteControl Holder (spare)27

C-Bus ®Input UnitsScene ControllersScene Controllers,Standard RangeSlimline SC2000 Series• Allow up to 4 scenes or moods to be set fromone switch• Each time a button is pressed the scene is issued• Up to 9 turn on/off or 6 ramp commands may beprogrammed on each buttonSC5034NS4 channel scene controller• Units draw 18mA from a C-Bus ® network.2000 Series5034NS4 channel scene controller, rectangleE5034NS4 channel scene controller, squareEclipse ® SL2000 SeriesClassic C2000 SeriesSL5034NS4 channel scene controllerC5034NS4 channel scene controller28C-Bus ® Product Overview

Scene Master ®Scene Controllers• Scene Controller with IR capability features 5 preset buttons• Dimensions 175mm x 88mm x 23.3mm• Additional master off button• Scenes and Master OFF functions accessible from theunit or IR remote control (supplied)• Facility to set up to 5 scenes on each unit and up to 9Group Addresses may be associated with each scene• The unit may be programmed with the C-Bus ®application software5035NIRSLTR,GB5 key scene controller with IR, grey and silverwith smoked transparent cover• Scene may be set from the unit itself via learnenabled features• Units draw 32mA from a C-Bus ® network• C-Bus ® Learn Enabled.5035TXRemote control to suit SceneMaster (spare)5035NIRSL,WE5 key scene controller withIR, white5035NIRSLTR,WE5 key scene controller with IR, white withsmoked transparent cover29

C-Bus ®Input UnitsTouch ScreensColour Touch ScreensColour Touch Screen- Saturn Series• Available in Neo ® , flat stainless steel and Saturn Glassstyle surrounds• 6.4” (diagonal), VGA, 640 x 480 pixels, colour LCD screen• Displays pages of graphical items, such as buttons,sliders and images that perform C-Bus ® related functionswhen pressed• Includes a real time clock for automatic scheduling ofevents based on the time of day, week, month or year5080CTC2,GFColour touch screen, 6.4inch colour, white glassfacia, less wall box, lesspower supply• Controllable via an Infra-red hand held remote control unit• Fully customised to suit user requirements via the includedWindows compatible configuration software• The software includes a logic engine module that allowsthe installer to program logic based (if-then-else) controlinto the touch screen configuration• Connects directly to a C-Bus ® network (no external C-Bus ®PC Interface required)• Control and monitor devices connected to C-Bus ® , ethernetand RS-232 (custom ethernet and RS-232 support via theincluded logic programming language)5080CTC2-6Colour touch screen, 6.4inch colour, black glassfacia, less wall box, lesspower supply• Unit programmable via an ethernet connection• Client / server plugin for Windows Media Player• Animated buttons with more than 256 animationframes supported• Fully customisable graphics including bar graphs, sliders,percentage indicators, images, gauges and clocks with anyborder and background style5080CTC2-3Colour touch screen, 6.4inch colour, cream glassfacia, less wall box, lesspower supply• Supports web page embedding• Supports IP camera inputs• Supports project theme templates• Audio WAV file support• Scene control• Event Scheduling support• Irrigation control5080CTC2-7Colour touch screen, 6.4inch colour, mid-brown glassfacia, less wall box, lesspower supply• Password access control• Dimensions: 248mm x 175mm x 60mm.30C-Bus ® Product Overview

Colour Touch Screen- Neo ® SeriesColour Touch Screen- Accessories5050CTC2Colour touch screen,6.4 inch colour, neo stylefacia, less wall box, lesspower supply5000CTCWBWall box for 6.4 inchcolour touch screenColour Touch Screen- Metal Plate Series5000CTCNANail bracket for 6.4 inchcolour touch screenBS5000CTC2‘B’ style metal platecolour touch screen,6.4 inch colour, stainlesssteel style facia, less wallbox, less power supply5000CTRMGyproc bracket for 6.4 inchcolour touch screen5000CTCPS/2Power supply for 6.4 inchcolour touch screen, V231

C-Bus ®Input UnitsC-Bus ® Touch ScreensMonochrome Touch Screens‘B’ Style Flat Plate- brass• Wall mount, touch sensitive LCD screen• Dimensions 152mm x 115mm x 38mm• Displays ‘pages’ of graphical items, such as buttons,sliders and images that can perform C-Bus ® relatedfunctions when pressedBB5000CTTouch screen,monochrome• Includes a real time clock for automatic scheduling of events• Allows control via the infra-red hand held remote controlunit supplied• The unit is programmed via Windows compatible touchscreen configuration software• The unit may be programmed with the C-Bus ®application software• Scene may be set from the unit itself via learnenabled features• Connects to a C-Bus ® network and is powered from C-Bus. ®Slimline SC2000 SeriesMonochrome Touch Screen- with desktop stand5000CTD,GBTouch screen,monochrome, withdesktop stand and5 metre lead, greywith stainless steel faciaSC5000CTTouch screen, monochrome‘B’ Style Flat Plate- stainless steelBS5000CTTouch screen, monochrome32C-Bus ® Product Overview

Monochrome Touch Screen- wall boxNeo ® Series- accessories5000CTWBWall box forC-Bus ® monochrometouch screen5050CTSSurround only, Neo ® style,for use with monochrometouch screen33

C-Bus ®Dimmer UnitsHigh Power, Multi ChannelProfessional Series Dimmers• Rugged, high quality dimmer units specifically designedfor architectural dimming applicationsOutput Units• Dimensions 533mm x 486mm x 163mm• Leading edge dimmers suitable for incandescent and lowvoltage lighting• Feature opto-controlled electronic switching devicesL5112D16B212 channel dimmer, 16Aper channel, 250V ac, MCCBprotection, 40 - 80Hz,APC technology• Chokes provide high rise time along with excellent highfrequency noise suppression and low acoustic noise• Feature “Advanced Phase Control” (APC) switchingtechnique giving greater efficiency resulting in cooleroperation and ultimately improved reliability• Front panel buttons, channel switches, LED indicatorsand seven-segment display enable the user to monitorand select the built-in functions• Control from either a DMX-512 source or from C-Bus ®• Units draw 22mA from a C-Bus ® NetworkL5112D20B212 channel dimmer, 20Aper channel, 250V ac, MCCBprotection, 40 - 80Hz,APC technology• C-Bus ® Learn Enabled.L5112D10B212 channel dimmer, 10Aper channel, 250V ac, MCCBprotection, 40 - 80Hz,APC technologyL5112D10B2S12 channel dimmer, 10Aper channel, 250V ac, MCCBprotection, 40 - 80Hz, APCtechnology with socket outletsL5112D12B212 channel dimmer, 12Aper channel, 250V ac, MCCBprotection, 40 - 80Hz,APC technology34C-Bus ® Product Overview

High Power, Multi ChannelProfessional Series Dimmers- accessories5150SMBMounting bracket - shallow5150DMBMounting bracket - deep5150DMXDMX connector kit35

C-Bus ®Output UnitsDimmer UnitsProfessional Series Dimmers• Leading edge dimmers suitable for incandescent and lowvoltage lighting• Dimensions 240mm x 220mm x 75mm• Feature an emergency lighting output in case of loss ofmains power to the unit• Incorporate a software selectable network burden andC-Bus ® system clock• Dimmers incorporate a 60mA power supply• Up to 30 units may be connected to any C-Bus ® networkL5104D54 channel dimmer 250V ac, 5A perchannel, 20A total, 60mA inbuiltC-Bus ® power supply• C-Bus ® Learn Enabled.L5102D102 channel dimmer 250V ac, 10A perchannel, 20A total, 60mA inbuiltC-Bus ® power supplyL5101D201 channel dimmer 250V ac, 20Aper channel, 20A total, 60mA inbuiltC-Bus ® power supply36C-Bus ® Product Overview

DIN Rail Mounted UniversalDimmer RangeL5504D2U4 channel C-Bus ® universal dimmer 250V ac, 2.5A perchannel, inbuilt 200mA C-Bus ® power supplyL5504D2UP4 Channel C-Bus ® universal dimmer 250V ac, 2.5A perchannel, no inbuilt C-Bus ® power supply• 4 channel universal dimmer, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Features 4 channels of 2.5A rating• Suitable for use with leading edge or trailing edgecompatible low voltage transformers• Suitable for low voltage electronic transformers,incandescent lamps and low voltage lamps withiron core transformers• Features automatic load sensing• Features a software selectable network burden andC-Bus ® system clock• A maximum of 10 units may be connected to aC-Bus ® network• Features an inbuilt 200mA C-Bus ® power supply• C-Bus ® Learn Enabled.• 4 channel universal dimmer, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Features 4 channels of 2.5A rating• Suitable for use with leading edge or trailing edgecompatible low voltage transformers• Suitable for low voltage electronic transformers,incandescent lamps and low voltage lamps withiron core transformers• Features automatic load sensing• Features a software selectable network burden andC-Bus ® system clock• A maximum of 100 units may be connected to aC-Bus ® network• Does not source current to the network• Draws 18mA from C-Bus ® when mains is not connected• C-Bus ® Learn Enabled.37

C-Bus ®DIN Rail MountedDimmer RangeOutput UnitsDimmer UnitsL5508D1A8 channel dimmer 250V ac, 1A per channel,inbuilt 200mA C-Bus ® power supply• 8 channel dimmer, DIN rail mounted• 12M DIN Modules Wide• Dimensions 215mm x 85mm x 65mm• Features 8 channels of 1A output, suitable forincandescent and low voltage lighting• Features a software selectable network burden andC-Bus ® system clock• A maximum of 10 units may be connected to anyC-Bus ® network• Features an inbuilt 200mA C-Bus ® power supply• C-Bus ® Learn Enabled.L5504D2A4 channel dimmer 250V ac, 2A per channel,inbuilt 200mA C-Bus ® power supply• 4 channel dimmer, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Features 4 channels of 2A output, suitable forincandescent and low voltage lighting• Features a software selectable network burden andC-Bus ® system clock• A maximum of 10 units may be connected to anyC-Bus ® network• Features a 200mA C-Bus ® power supply• C-Bus ® Learn Enabled.L5508D1AP8 channel dimmer 250V ac, 1A per channel,no inbuilt C-Bus ® power supply• 8 channel dimmer, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Features 8 channels of 1A output, suitable forincandescent and low voltage lighting• Features a software selectable network burden andC-Bus ® system clock• A maximum of 100 units may be connected to anyC-Bus ® network• Does not source current to the network• Draws 18mA from the C-Bus ® when mains isnot connected• C-Bus ® Learn Enabled.L5504D2AP4 channel dimmer 250V ac, 2A per channel,no inbuilt C-Bus ® power supply• 4 channel dimmer, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Features 4 channels of 2A output, suitable for incandescentand low voltage lighting• Features a software selectable network burdenand C-Bus ® system clock• A maximum of 100 units may be connected to anyC-Bus ® network• Does not source current to the network• Draws 18mA from the C-Bus ® when mains isnot connected• C-Bus ® Learn Enabled.38C-Bus ® Product Overview

C-Bus ® DSI Gateway Range0-10V Analogue Output UnitL5508DSI8 channel dimmer for DSI electronic ballasts 250Vac, inbuilt 200mA C-Bus ® power supplyL5504AMP4 channel analogue output, 0-10V• 8 channel dimmer for DSI ballasts, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Provides C-Bus ® control of electronic DSI digital ballasts• The module controls up to 100 DSI ballasts per channel• Up to 10 units may be connected to any C-Bus ® network• Used in conjunction with electronic DSI ballasts• The Dimmer features a 200mA C-Bus ® power supply• C-Bus ® Learn Enabled.• Analogue output module, DIN rail mounted• 4M DIN modules wide• Requires a 240V ac connection• Dimensions 72mm x 85mm x 65mm• Can either source or sink current and is used to drivemost types of 0-10V electronic dimmable ballasts• The unit provides 4 independent output channels• Powered from C-Bus ® and requires 18mA at 15 - 36Vdcfor correct operation• The polarity of the signal may be selected so that 0Vcorresponds to maximum or minimum brightness• Units draw 18mA from the C-Bus ® when mains is notconnectedL5508DSIP8 channel dimmer for DSI electronic ballasts 250Vac, no inbuilt C-Bus ® power supply• C-Bus ® Learn Enabled.• 8 channel dimmer for DSI ballasts, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Provides C-Bus ® control of electronic DSI digital ballasts• The module controls up to 100 DSI ballasts per channel• Up to 100 units may be connected to anyC-Bus ® network• Used in conjunction with electronic DSI ballasts• Units draw 18mA from the C-Bus ® network when mains isnot connected• C-Bus Learn Enabled.39

C-Bus ®Output UnitsInfra-red Output UnitsInfra-red Output Units• Transmits IR codes to third party devices• Capable of broadcasting IR messages through twoIR output channels (consist of 3.5mm mini audiomono sockets)• Single or dual head emitter leads (ordered separately)should be connected to the output jacks• Programmed via the High Speed Programing Cable (partnumber 5100HSCU, ordered separately, see page 41)5034NIRT2 channel infra-red transmitterunit, 2000 Series wall plateE5034NIRT2 channel infra-red transmitterunit, 2000 Series wall plate,British style• The installer has the facility to modify the stored codesusing Windows based application software• Stores a library of commonly used IR codes• The Infrared Controller is based on the standard range ofClipsal 4-gang wall switches• The standard colours are White Electric, Soft Grey,Desert Sand, Cream, Brown and BlackC5034NIRT2 channel infra-red transmitterunit, Classic C2000 Serieswall plate• Units draw 32mA from the C-Bus ® network.SC5034NIRT2 channel infra-red transmitterunit, Slimline SC2000 Serieswall plateSL5034NIRT2 channel infra-red transmitterunit, Eclipse SL2000 Serieswall plate40C-Bus ® Product Overview

Infra-red Output Units- accessories5100HSCUHigh speed programming cablefor C-Bus ® 2 channel infra-redtransmitter unit.5100RPInfra-red code learning unitInfra-red code learning unit, complete with Windows based software. Required for learning third party infra-redcodes not included in the code library shipped with theinfra-red transmitter unit software.41

C-Bus ®10A Relay UnitsOutput UnitsRelay UnitsL5512RVF12 channel relay 250V ac, 10A inductiveload per channel, inbuilt 200mA C-Bus ®power supply• 12 channel relay module, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Featuring 12 channels of voltage free relay switching• Rated at 10A incandescent or 10A fluorescent loadper channel• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 10 units may be connected to anyC-Bus ® network• Incorporates an inbuilt 200mA C-Bus ® power supply• C-Bus ® Learn Enabled.L5512RVFP12 channel relay 250V ac, 10A inductive load perchannel, no inbuilt C-Bus ® power supply• 12 channel relay module, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• Featuring 12 channels of voltage free relay switching• Rated at 10A incandescent or 10A fluorescent loadper channel• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 100 units may be connected to anyC-Bus ® network• These units draw 18mA from C-Bus ® network whenmains is not connected• C-Bus ® Learn Enabled.42C-Bus ® Product Overview

L5504RVF4 channel relay 250V ac, 10A inductive load per channel,inbuilt 200mA C-Bus ® power supplyL5504RVFP4 channel relay 250V ac, 10A inductive load perchannel, no inbuilt C-Bus ® power supply• 4 channel relay module, DIN rail mounted• 8M DIN modules wide• Dimensions 144mm x 85mm x 65mm• Featuring 4 channels of voltage free relay switching• Rated at 10A incandescent or 10A fluorescent loadper channel• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 10 units may be connected to anyC-Bus ® network• Incorporates an inbuilt 200mA C-Bus ® power supply• C-Bus ® Learn Enabled.• 4 channel relay module, DIN rail mounted• 8M DIN modules wide• Dimensions 144mm x 85mm x 65mm• Featuring 4 channels of voltage free relay switching• Rated at 10A incandescent or 10A fluorescent loadper channel• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 100 units may be connected to anyC-Bus ® network• These units draw 18mA from C-Bus ® when mains isnot connected• C-Bus ® Learn Enabled.43

C-Bus ®Output UnitsRelay UnitsChangeover Relay UnitsMotorised Blinds/Curtains/Shutter Relay UnitL5504RVFCP4 channel changeover relay, 250V ac,no inbuilt C-Bus ® power supply,learn enabledL5501RBCPC-Bus ® MotorisedBlinds/Curtains/Shutter Relay,250 V ac, no C-Bus ® Power SupplyL5504RVFC4 channel changeover relay, 250V ac, learn enabled,inbuilt 200mA C-Bus ® power supply, learn enabled• 4 channel changeover relay modules with interlockfeatures, DIN rail mounted• 8M DIN modules wide• Dimensions 144mm x 85mm x 65mm• Used for control of air conditioning systems (on/off, low,medium and high) and shutter or blind control (up/down)• Single channel relay unit for the direct control ofmotorised blinds, curtains or shutters via C-Bus ® ,DIN rail mounted• 2M DIN modules wide• Dimensions 36 x 93mm x 63mm• Allows up/down and stop control• A maximum of 80 units may be connected to aC-Bus ® network• Units draw 18mA from C-Bus ®• C-Bus ® Learn Enabled.• The unit can be simply wired to achieve electricalinterlocking, for use where outputs are all mutually exclusive• Relays rated at 10A resistive, 5A incandescent/inductive,1A fluorescent• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 100 units may be connected to anyC-Bus ® network• These units draw 18mA from C-Bus ® when mains isnot connected• C-Bus ® Learn Enabled.44C-Bus ® Product Overview

20A Relay UnitsL5504RVF204 channel relay, 250V ac, 20A inductive load per channel,inbuilt 200mA C-Bus ® power supply• 4 channel 20A relay module, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• 4 channels of voltage free relay switching• Rated at 20A incandescent, 20A HID or 20A fluorescentload per channel• Relays features magnetic latching• Built in mechanical level for manual changeover ofrelay state• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 10 units may be connected to anyC-Bus ® network• Incorporates an inbuilt 200mA C-Bus ® power supply• C-Bus ® Learn Enabled.• 4 channel 20A relay module, DIN rail mounted• 12M DIN modules wide• Dimensions 215mm x 85mm x 65mm• 4 channels of voltage free relay switching• Rated at 20A incandescent, 20A HID or 20A fluorescentload per channel• Relays feature magnetic latching• Built in mechanical level for manual changeover ofrelay state• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 100 units may be connected to anyC-Bus ® network• Units draw 18mA from the C-Bus ® when mains isnot connected• C-Bus ® Learn Enabled.45

C-Bus ®Output UnitsRelay UnitsL5504RDP4 channel relay driver 250V ac, no inbuiltC-Bus ® power supply. Note: output control relaysmust be purchased separately5000RL20Single relay 250V ac, 20A inductive load.Note: Must be used in conjunction with CatalogueNumbers L5504RD or L5504RDP• 4 channel relay driver, DIN rail mounted• 8M DIN modules wide• Dimensions 144mm x 85mm x 65mm• Features 4 channels capable of driving the coils of up tofour external 20A relays (one per channel)• Does not directly control a mains output load and must beused with Cat Numbers 5000RL20 or 5002RL20• Incorporates a software selectable network burden andC-Bus ® system clock• A maximum of 100 units may be connected to anyC-Bus ® network• Units draw 18mA from the C-Bus ® when mains isnot connected.• Heavy duty 20A mechanically latched relay,DIN rail mounted• Approx. 1.5M DIN modules wide• Dimensions 96mm x 24.5mm x 60mm• Suitable for controlling up to 20A of incandescent, HID orfluorescent loads• Rated at 20A incandescent, 20A HID or 20A fluorescentload per channel• Relays feature mechanical latching• Built in mechanical level for manual changeover ofrelay state• Incorporates an auxiliary output contact and amechanical on/off override for manual operation• Must be used in conjunction with the Cat NumbersL5504RD or L5504RDP relay driver products.46C-Bus ® Product Overview

Standard Relay Units5101R1 channel relay 250V ac10A inductive load5002RL20Dual relay 250V ac, 20A inductive load per relay.Note: Must be used in conjunction with Cat NumbersL5504RD or L5504RDP (see page 46)• 2 x 20A magnetically latching relay module,DIN rail mounted• 4M DIN modules wide• Dimensions 72mm x 85mm x 65mm• Must be used in conjunction with the C-Bus ® L5504RD orL5504RDP relay driver products• Single C-Bus ® relay unit• Dimensions 198mm x 42mm x 39mm• Featuring 1 channel of 240V ac switching• Suitable for incandescent, inductive and fluorescentswitching up to a maximum load of 10A• A maximum of 100 units may be connected to anyC-Bus ® network• These relays do not draw any current from C-Bus ®network when mains power is connected.• Compatible with 20A incandescent, inductive orfluorescent loads• Must be used in conjunction with the Cat NumbersL5504RD or L5504RDP relay driver products• Incorporates mechanical overrides accessible by the user5102RVF2 channel voltage free relay 250 V ac,10A inductive per channel• The mechanical lever is labelled with ON and OFF toindicate relay status.• 2 channel C-Bus ® relay unit• Dimensions 198mm x 42mm x 39mm• Featuring 2 channels of 240V ac switching• Suitable for incandescent, inductive and fluorescentswitching up to a maximum load of 10A per channel• A maximum of 100 units may be connected to anyC-Bus ® network• These relays do not draw any current from C-Bus ®network when mains power is connected.47

C-Bus ®System Unitsand AccessoriesPascal Automation ControllerTelephone Interface5500PACAC-Bus ® PascalAutomation Controller5100TAUTelephone Interface• Provides extended conditionaland real-time event programming for C-Bus ®• Programs downloaded to the unit from a PC• Connects directly to C-Bus ®• Powered from C-Bus ®• 4M DIN modules wide• 2 x RS-232 ports for third party device control• A scheduling tool allows time based events to beprogrammed into the unit• A scene programming tool allows installers to quickly andeasily program scenes into the unit• A programming wizard provides a GUI based method forcreating basic logic programs.• Offers a dial in and dial out facility, permitting controland status monitoring for a C-Bus ® system via anytouchtone phone• Dimensions 146mm x 146mm x 30mm• It also includes an audio output, so that C-Bus ® eventscan be audibly announced• Programmed using a connection to a PC running theC-Bus ® telephone interface configuration software• The unit can also act as a C-Bus ® PC interface• Allows C-Bus ® to be programmed and configured eitherlocally or from a remote site using a data modem.• More complex programs are produced by advanced usersutilising the freeform text programming method• Programming language based on the standard Pascalcomputer language, enhanced by Clipsal with specificcommands related to C-Bus ® control.• The language supports commands such as:o Conditional logic (if then, and, or, not etc)5100TMBBracket for mounting to aClipsal StarServe ® enclosureo Flow Control (for, repeat, while)o Variables (integer, real, Boolean, character, string)o Control and monitor C-Bus ® group addresseso Control and monitor C-Bus ® sceneso C-Bus ® tag nameso Serial (RS-232) input/output.48C-Bus ® Product Overview

C-Bus ® to DALI GatewayC-Bus ® Power Supply5502DALDALI Gateway5500PSPower supply, 350mA• C-Bus ® to DALI Gateway, DIN rail mounted• 4M DIN modules wide• Dimensions 72mm x 85mm x 65mm• Supports DALI lamp and ballast failure information to beavailable on the C-Bus ® network• Capable of controlling up to two DALI networks• The unit supports DALI group addresses, short addressesand scenes the DALI global (broadcast) address• A remote switch input is included to turn all DALI outputchannels to the ON or OFF states, irrespective of thecurrent state of the C-Bus ® , including no C-Bus ®• C-Bus ® power supply, DIN rail mounted• 4M DIN modules wide• Dimensions 72mm x 85mm x 65mm• Supplies 350mA at 18-36V dc to the C-Bus ® network• Each power supply supports approximately 18 standardC-Bus ® units• Up to 5 power supplies may be used on any singleC-Bus ® network.C-Bus ® PC Interface• Incorporates the C-Bus ® clock signal and anetwork burden• Up to 50 DALI Gateways can be connected to a singleC-Bus ® network• Units Draw 32mA from a C-Bus ® network.5500PCPC interface• C-Bus ® PC interface, DIN rail mounted• 4M DIN modules wide• Dimensions 72mm x 85mm x 65mm• Features two connections to C-Bus ® (2 x RJ45 sockets)• Features three connections to RS232 (2 x RJ45 and1 x DB9 sockets)• Units Draw 32mA from a C-Bus ® network.49

C-Bus ®System Unitsand AccessoriesC-Bus ® EthernetNetwork InterfaceC-Bus ® Network Bridge5500CNC-Bus ® Ethernetnetwork interface5500NBC-Bus ® Network bridge• C-Bus ® ethernet network interface, DIN rail mounted• 4M DIN modules wide• Dimensions 72mm x 85mm x 65mm• Provides a two-way C-Bus ® to ethernet network interface• Allows C-Bus ® commands to be distributed via a10 Base-T ethernet (TCP/IP) network• C-Bus ® network bridge, DIN rail mounted• Based on a 4M DIN module• Dimensions 72mm x 85mm x 65mm• Provides a two-way C-Bus ® to C-Bus ® network interface• Units Draw 18mA from a C-Bus ® network.• Features 2 x C-Bus ® RJ45 connections and 1 x eEthernetRJ45 connection• The unit requires an external 9-12V dc powerpack supplied.50C-Bus ® Product Overview

C-Bus ® Network AnalyserC-Bus ® Cable5100NAC-Bus ® network analyser• The Network Analyser is a tool used to measure variousC-Bus ® system parameters:- Power Available- Clock Signal Present- Excess Voltage- Add/Remove Burden- Excess Cable Indication• Dimensions 60.5mm x 120mm x 30.3mm• Measures capacitance, burden, clock signal andnetwork voltage• The network analyser is powered from C-Bus ® and issupplied with a pair of leads.5005C305BC-Bus ® Category 5, 4 pair,UTP cable, 305 metres• 4 pair, Category 5, unshielded cable with a unique outercolour sheath specifically designed for the C-Bus ® system• A maximum of 1000 metres of cable is permitted on anyone C-Bus ® network• Two pairs are used for the C-Bus ® connection C-Bus ®positive (blue + orange) and C-Bus ® negative (blue/white+ orange/white)• The C-Bus ® cable must be segregated from the mainscable in C-Bus ® installations• C-Bus ® cable has a mains rated outer sheath andStandard Cat 5 cable does not have this rating• Suitable for use inside electrical enclosures.C-Bus ® Barcode Reader5100BCSBar code reader, USB connection,for use with C-Bus ® Toolkit software51

C-Bus ®SoftwareC-Bus ® Toolkit SoftwareHomeGate SoftwareC-Bus ® Toolkit software is a PC-accessible C-Bus ® networkconfiguration and customer solution programming utility. Itallows the installer to:• Connect directly to an installer C-Bus ® network via aC-Bus ® PC interface unit to synchronise logical andphysical C-Bus ® customer site data• Configure the C-Bus ® network to define the C-Bus ®architecture of the customer site and ensure C-Bus ® unitscan communicate with each other• Program and commissionthe customer solution• Save, backup andrestore sites. C-Bus ®Toolkit has a databasefor creating and storingcustomer siteprogramming as projects.The HomeGate application software provides a powerfulbut simple to use interface to C-Bus ® via a standard PC.HomeGate provides scheduling, manual control andmonitoring of a domestic C-Bus ® system from a PC runningWindows 98, 2000, NT, ME or XP. HomeGate comprises ofa project editor, real time monitoring and control, a real timescheduler, security and access control and internet access.It also includes help and support documentation.5000SDHG2/4HomeGate applicationsoftware and technicalmanuals, two C-Bus ®networks licence5000SDHG10/4HomeGate applicationsoftware and technicalmanuals, tennetwork licenceSchedule Plus SoftwareSchedule Plus application software provides a powerful andeasy use interface to C-Bus ® via a standard PC. SchedulePlus has been developed specifically for commercial andindustrial applications. It provides scheduling, manualcontrol and monitoring of a C-Bus ® system from a PCrunning Windows 98, 2000, NT, ME or XP.5000SDSP2/4Schedule Plus applicationsoftware and technicalmanuals, two C-Bus ®networks licence5000SDSP10/4Schedule Plus applicationsoftware and technicalmanuals, ten network licence5000SDSPU/4Schedule Plus applicationsoftware and technical manuals,unlimited network licence52C-Bus ® Product Overview

C-Gate ® SoftwareC-Bus ® OPC Server SoftwareThe Clipsal C‐Gate ® server is a software suite that monitors andcontrols the C-Bus ® Control and Management System. It hasbeen produced by Clipsal Integrated Systems to allow third partysoftware developers and existing Building Management Systemsto interface to C-Bus ® at a high level, allowing high-speed controland monitoring of C‐Bus ® .The C-Bus OPC Server provides an interface betweenthird party software (OPC Clients) and a C-Bus System.The C-Bus OPC Server acts as a gateway for transmittingC-Bus lighting type application information between thirdparty Building Management Systems (such as Honeywell,Johnson, TAC, etc.) or Process Control Presentation(SCADA) Systems and a Clipsal C-Bus System.A C-Bus OPC Server USB dongle must be purchased totake the software from an evaluation version to a full workingversion.5000SDOPC2/12 network licence dongle for C-Bus OPC Server5000SDOPC10/110 network License Dongle for C-Bus OPC Server5000SDOPCU/1Unlimited network license for C-Bus OPC Server53

C-Bus ®SoftwarePiced SoftwareMarpa SoftwareProgramming Interface for C-Bus ® embedded devicesPiced is used to configure the following devices to meetthe user’s requirements:• C-Touch black and white touchscreen• Colour C-Touch touchscreen• Pascal Automation Controller (PAC)The Piced software features include:• Display of many components on many pages• Scenes for the control of many loads together• Schedules for the automatic control of loads• Access control to provide security• Irrigation controlMulti Room Audio Rapid Programming ApplicationMarpa software is used to configure the C-Bus ® MultiRoom Audio Matrix Switcher unit and is freely availablefrom the Clipsal Integrated Systems web site. It requiresthe use of USB port on the PC to connect to the MatrixSwitcher. Marpa software requires that the C-Bus ® Toolkitis installed.Marpa is freely downloadable from the ClipsalIntegrated Systems web site.Piced is freely downloadable from the Clipsal IntegratedSystems web site.54C-Bus ® Product Overview

Tica SoftwareCirca SoftwareTelephone Interface Commissioning ApplicationTica software is used to configure the C-Bus ® TelephoneInterface (CBTI). It requires the use of a RS232 serialport on the PC to connect to the CBTI. Tica softwarerequires that C-Bus Toolkit is installed.Tica software is freely downloadable from the ClipsalIntegrated Systems web site.C-Bus ® Infrared Commissioning SoftwareCirca software is used to commission C-Bus ® InfraredDevices (5034NIRT). The software allows the user toselect IR codes and assign them to particular outputchannels on an Infrared Device and make associationsbetween IR codes and C-Bus ® events. The user can importIR device files created by the 5100RP Infrared Readerdevice. Circa software requires that C-Bus ® InstallationSoftware V2 is installed.Circa software is freely downloadable from the ClipsalIntegrated Systems web site.55

C-Bus ® Product Overview

Stainless Steel - SSChrome - CHGold - GDBrushed Aluminium - BABrushed Brass - BBPolished Brass - BSGunmetal -GMChrome Shadow -3SSilver Plate - SPGold Plate - GPNeo ® Grey - GBNeo ® Brushed Aluminium* - BANeo ® Gold* - GDWhite - WECream - CMSoft Grey - SGDesert Sand - DSBlack - BKBrown - BRRed - RDGrey - GYBeige - BGDove Grey - DONutmeg - NUSlimline Classic Eclipse ® 2000 Neo ®* These colours only availble for the Inner Surround.Note: Silver and Gold Plate only available on surrounds of 2000 Series.57

Multi-Room Audio SystemSystem OverviewThe C-Bus ® Multi-Room Audio System allows users to listen toand control audio sources from convenient locations around thehome. The system is both simple to install and easy to use.The system has been designed utilising new digital audiodistribution technology (developed by Clipsal), in conjunctionwith Clipsal C-Bus ® core technology for system communicationand integration.Clipsal’s digital audio distribution technology allows for noiseand interference free audio reproduction, whilst the C-Bus ®technology allows the audio products to be seamlessly integratedand used with all existing C-Bus ® products. For example, volumecan be controlled from the same C-Bus ® switch or touch screencontrolling lighting.In addition, the system allows any input audio source to be madeavailable in any audio zone. Changes to the input audio sourcecan easily be made by the user from a local C-Bus ® device atany time, regardless of where the audio source equipment (e.g.,CD Player) is physically located. It is compatible with most audiosources and it accommodates standard stereo line level analogueinputs as well as digital audio TOS link inputs.Infrared signals from hand held remote controls can be routedthrough the system by connecting IR targets and emitters. IRcommands can also be stored by the system and activated byprogrammed C-Bus ® commands.The C-Bus ® Multi-Room Audio System allows a number ofdifferent system layout options. This flexibility allows for awide range of customer needs and installation requirements.Two example schematics are shown opposite.Option AThis basic option allows a single audio source to beavailable to a number of C-Bus ® Audio Amplifiers and tobe controlled from convenient locations around the home(via any combination of C-Bus ® input devices). This optionrequires one Cat-5 cable for the audio distribution. This cableis cascaded between each Audio Amplifier.Option BThis option allows more flexibility. Multiple audio sources aremade available to all audio zones, with all the audio sourcesselectable on a zone-by-zone basis via C-Bus ® Input Devices.This option requires a separate (star wired) Cat-5 audio cableto each Audio Amplifier in a zone.58C-Bus ® Product Overview

Option A‘See note1 & 2 below’Option BNote 1The C-Bus ® Matrix Switcher is able to supply a limited amountof power to the Audio Amplifiers, as the system shares poweravailable via the Cat-5 audio network.Note 2Adding a power supply (5600P24/3750AU) to each amplifierwill change the output power rating from 10W to 25W RMS.For further information on MRA power, please refer tohttp://www2.clipsal.com/cis/technical/technical_support/application_notes59

Multi-Room Audio SystemUnits and AccessoriesAudio Matrix SwitcherAudio Distribution Unit560884AAudio Matrix Switcher, C-Bus ®enabled, four stereo audio inputsources and 8 digital audiooutput sources.560011Audio Distribution Unit,one stereo audio inputsource and one digitaloutput source• Digital audio distribution technology, for noise freeaudio reproduction• Four stereo analogue audio source inputs• Audio sources switched via any C-Bus ® input device or via thecontrol panel on the front of the Matrix switcher• Eight digital audio zone outputs (~45m for each starwired output)• Distributes a single stereo audio source to C-Bus ® AudioAmplifiers via a digitised signal over Cat-5 cable.• Does not require any C-Bus ® programming• One stereo analogue audio source input• One digital audio output (cascadable to multiple zones)• Output can be looped between C-Bus ® Audio Amplifiers• Dimensions: 165mm x 50mm x 40mm.• Cat-5 cable connection between Matrix switcherand amplifiers• Two mono annunciation inputs• Voice annunciation of channel changes (selectable)• One fibre-optic SPDIF input (digital audio compatible)• One custom digital input to allow cascading of units or forconnecting an Audio Distribution Unit giving 1 additionalstereo analogue input• C-Bus ® infrared output (2 zones) for third party equipmentcontrol• Reticulated IR support5600P24/500AUExternal power supplyfor audio distributionunit, switch mode,24V dc, 500mA (onlyrequired if 560011used to provide anadditional digital inputfor Matrix Switcher)• User interface consisting of LCD display and tactilefeedback switches• C-Bus ® messages control selection of input/output routing• Contains a C-Bus ® PC interface• Internal C-Bus ® PSU• Internal 4A PSU for the amplifiers• Configuration set up through or USB• Control via C-Bus ® input devices, such as C-Bus ® wallswitches, touch screens, etc• Dimensions: 425mm x 289mm x 75mm.60C-Bus ® Product Overview

Audio Amplifiers560125D/225 Watt/channel (RMS)stereo audio amplifier,C-Bus ® enabled,desktop-mount version5600P24/3750AUExternal power supplyfor audio amplifier, switchmode, 24V dc, 3.75A560125R/225 Watt/channel (RMS)stereo audio amplifier, C-Bus ®enabled, remote-mount version• Used in conjunction with the C-Bus ® Audio MatrixSwitcher or the Audio Distribution Unit• Controllable via C-Bus ® input devices, such as C-Bus ®wall switches and touch screens• Volume, bass, treble, balance controlled by C-Bus ® inputdevices• Quiet digital audio design• Stereo 25W RMS per channel – Remote and desktopmounted units (when power supply fitted)• Can be cascaded off one Digital Audio Cat 5 input• Pre-amp output stage for connecting to a 3rd partypower amplifier• Desktop Amplifier includes power on/off, mute, volumeand source select buttons and an infrared target forremote control. Also includes 3.5mm stereo headphone jack• Set up via C-Bus ® Toolkit software• Signal source either:o Distributed digitalo Locally connected line-level analogueo Fibre-optic (TOSlink) SP/DIF (16bit, 48kHz)• IR Target connection for reticulated IR support• High efficiency, ~70% at full power• Dimensions (desktop): 181mm x 216mm x 75mm• Dimensions (remote): 175mm x 209mm x 71mm.61

Multi-Room Audio SystemUnits and AccessoriesAudio SpeakersIn-wall andIn-ceiling SpeakersIn-wall Speakers5600IWPFlush mounted speakers(pair), rectangular, in-wall,polypropylene drivers• Perfect for home theatre and multi-room audio applications• Available with polypropylene or kevlar drivers, providingquality sound in all applications• Flush mount design ensures only the front face of the speakeris visible and is flush with the wall/ceiling – inside of the wall/ceiling acts as the enclosure• Provide great sound without loosing valuable floor space.5600IWKFlush mounted speakers(pair), rectangular, in-wall,kevlar drivers• Sensitivity:

In-ceiling Speakers5600ICPFlush mounted speakers(pair), circular, in-ceiling,polypropylene driversOutdoor Speakers5600ODPOutdoor/shelf top speakers (pair),polypropylene drivers5600ICKFlush mounted speakers(pair), circular, in-ceiling,kevlar drivers• Designed to accurately reproduce high fidelity music inan outdoor environment• Long lasting design incorporating rigid, high-impactplastic cabinets, polypropylene drivers, and powdercoated metal grilles• Sensitivity:

Multi-Room Audio SystemMulti-Room Audio- AccessoriesUnits and Accessories5600TEERJ45 Bypass Tee Connector foramplifiers with common digital feedthat require individual control8050LDIR Emitter Lead, single8050TRIR Target for 5V StarServe ®IR system8050/2LDIR Emitter Lead, dual64C-Bus ® Product Overview

8050STIR Shelf Target, with1.8m cable8050FTIR Flat Target, with 1.8m cable8050TTIR Tube Target, with 1.8m cable65

Clipsal C-Bus ®Typical SchematicsHome66C-Bus ® Product Overview

Commercial High Rise Building3667

SEHK/CHK/CBUS0211/2009