HOPPE (UK) Ltd - Swiss Shade

Architectural Aluminium
aluminium handles are produced
using high quality, corrosion resistant alloys.
The surface finish of HOPPE aluminium
products is by anodising, which gives certain
protection against atmospheric corrosion,
perspiration from hands, and light scratching.
Aluminium does not need special care because
the oxide film protects the surface. Dirt spots
can be removed with a soft cloth and water.
Aluminium levers on round rose are available
either sprung or unsprung and are supplied
complete with the full profile
spindle, and bolt fixings for a more secure fix
to the door.
Pull handles are available in concealed screw
fix, bolt fix or back to back fixing.
Consideration should be given to the use of
the handle, and bolt fix or back to back fix
should be specified in high use situations.
aluminium levers and pull handles
are ideal for use in public buildings, offices,
hospitals, and hotels where quality and
performance is required at an attractive price.
Certain levers have been tested to severe
duty category to PSA MOB H3 PS July 1989.
The tests have been carried out by a NAMAS
accredited testing laboratory (WC 0621). They
are tested to PSA and meet the requirements
of BS 4951:1973
The AR200/10 levers have been included in a
successful 1/2 hour fire test in accordance
with BS476 part 22 1987 at the Warrington
Fire Research and Testing Centre.