Filter bags - Comfilter

Filter bagsBag filtration is an economical and valid alternative tocartridge filtration. Dirt remains inside of the bag which iseasy to change and dispose of.The range includes different solutions to satisfy also themost sophisticated needs of filtration.Felt bags are manufactured with a single layer of needlepunched felt.The “extended life” series bags are fabricated usingmulti-layer felt to increase the dirt holding capacity.Micro fiber bags represent the conjunction between depthmelt-blown cartridge technology and bag filtration offeringhigh filtration performance.Monofilament bags are manufactured using polymer meshfor a precision surface filtration; these bags are washableand hence reusable.CHARACTERISTICS• Available rating from 1 to 800 µm• Available in all Industry standard sizes• Suitable for installatin inside of all standard housing• 5 different types of filter media: standard felt, extended lifefelt, monofilament, micro fiber, hybrid• 5 different materials: polypropylene, polyester, nylon,Nomex®, PTFE• 3 different top sealing system: molded plastic, metallic ringor ribbon• Available in sewn or all thermo welded constructionMAIN APPLICATIONSSolvents, varnishes, coatings, resins, enamels, latex,cataphoresis bath, inks, gels removal, oils removal, processwater, demi water, acids, intermediates chemicals, edibleoils, dairy products, sugar solution, detergents, mineral oil,additives, amines, deep well injection.CORRECTION FACTORS CfBag sizeViscositySize Cf cP Cf1 2.25 50 4.52 1.00 100 8.43 9.00 200 16.54 4.50 400 27.8800 50.01.000 56.01.500 77.02.000 114.04.000 160.06.000 250.08.000 325.010.000 430.0DP[mbar]14121086420FELT0 10 20 30 4013-1025-5075-100200DP[mbar]MICROFIBER1201008060402000 10 20 30 40Water flow-rate [m 3 /h]Water flow-rate [m 3 /h]Flow rate for size 2 bag and fluid with 1 cP viscosity.For different size and viscosity, multiply DP by proper correction factor - see table.Informacja techniczna i handlowa tel: +48 41 2429672; fax: +48 41 2434011Bolletin # B001-UK-03

Filter bagsPRODUCT SPECIFICATIONFiber Material Temperature 1 3 5 10 25 50 75 100 125 150 200 250 300 400 600 800 1000 1200Polypropylene Felt 95 °C - 203 °F þ þ þ þ þ þ þ þPolyester Felt 140 °C - 284 °F þ þ þ þ þ þ þ þ þNylon Felt 140 °C - 284 °F þ þ þ þ þNomex® Felt 245 °C - 473 °F þ þ þ þ þ þPTFE Felt 260 °C - 500 °F þ þ þ þ þPolypropylene XP felt 95 °C - 203 °F þ þ þ þ þPolyester XP felt 140 °C - 284 °F þ þ þ þ þPolypropylene Micro fiber 95 °C - 203 °F þ þ þ þ þ þPolypropylene BO/MF/MB 95 °C - 203 °F þ þ þ þ þ þ þ þPolypropylene Monofilament 95 °C - 203 °F þ þ þ þ þNylon Monofilament 140 °C - 284 °F þ þ þ þ þ þ þ þ þ þ þ þ þ þ þ þPTFE Monofilament 260 °C - 500 °F þ þ þ þ þ þ þF O.D. Length Surface VolumeSize [mm] [mm] [m 2 ] [liters]1 178 419 0.20 7.902 178 813 0.45 17.33 102 229 0.05 1.404 102 381 0.10 2.50ORDERING INFORMATIONB P O - 075 P2 P - WFILTER MEDIARATING [2] SIZE TIPO ANELLO TENUTASEALING RING STYLEOPZIONIOPTIONSPO Polypropylene felt 001 1 µm P1 178 x 419 mm P Molded Polypropylene NO - SewnPE Polyester felt 003 3 µm P2 178 x 813 mm S Tinned steel ring W Welded [1]NL Nylon felt 005 5 µm P3 102 x 229 mm E Stainless steel ringNX Nomex® felt 010 10 µm P4 102 x 381 mm B Polypropylene ringTE PTFE felt 025 25 µm T PTFE ringXP Extended life polypropylene 050 50 µm R RibbonXE Extended life polyester 075 75 µmML Multi layers felt 100 100 µmMF Polypropylene micro fiber 125 125 µmMP Hybrid PP micro fiber 150 150 µm 1] All welded construction only for PO and PE feltBO Seamless micro fiber 200 200 µm 2] Other filtration ratings availableMB Hybrid seamless micro fiber 250 250 µmNM Nylon monofilament 300 300 µmPM Polypropylene monofilament 400 400 µmTM PTFE monofilament 600 600 µm - Nomex® is a registered mark of DuPont CompanyOA Oil removal 800 800 µm - Saran® is a registered mark of Dow ChemicalC10 1000 µmC12 1200 µmMicron RatingsSuggested DPInitial Change out Maximum0.07 ÷ 0.2 bar 0.7 ÷ 1..3 bar 2.41 barASCO Filtri S.r.l.20089 ROZZANO (MI) – ITALYVia Silvio Pellico, 6/8Phone (+39) 02 89257.1Fax (+39) 02 89257.201e-mail asco@ascofiltri.comWeb site www.ascofiltri.comInformacja techniczna i handlowa tel: +48 41 2429672; fax: +48 41 2434011