dTRANS Rd 01 ÂµP Transmitter / Controller for redox potential (ORP)

More documents

Recommendations

Info

JUMO GmbH & Co. KG • 36035 Fulda, GermanyData Sheet 20.2535 Page 4/9General controller dataA/D converterresolution > 15 bitController typeOutputs 1 and 2limit controller, pulse width or pulsefrequency controller, modulatingcontroller. Freely configurable and mixableK3 / K5:continuous controllerControl actionconfigurable as P, PI, PID or PD.Sampling time210msecMeasurement circuit monitoringInput 1: out-of-rangeInput 2: out-of-range, probe short-circuit,probe breakThe outputs move to a defined(configurable) status.Data backupEEPROMSupply voltage110 — 240 V AC +10%/-15%,48 — 63 Hzor20 — 53 V AC/DC, 48 — 63/0 Hz,Power consumptionapprox. 8V AElectrical connectionvia gold-plated faston connectors toDIN 46 244/A; 4.8mm x 0.8mmredox combination electrode or metalelectrode via BNC socket.Wall-mounting housing(extra code /640)via screw terminals(wire cross-section up to 2.5 mm 2 )6 cable glands (1 x M16, , 5 x M20)Permissibleambient temperature0 to +50°CPermissibleambient temperature limits-10 to +55°CPermissible storage temperature-40 to +70°CClimatic conditionsrel. humidity ≤ 75%, no condensationEnclosure protectionto EN 60 529Instrument for switchgear cabinetfron IP65 / rear IP20Wall-mounting instrumentIP67Electrical safetyto EN 61 010clearance and creepage distances for- overvoltage category II- pollution degree 2Electromagnetic compatibilityto EN 61 326interference emission: Class Binterference immunity: to industrialrequirementsHousingInstrument for switchgear cabinet(basic version)panel-mounting housing in conductiveplastic to DIN 43 700, base material ABSwith plug-in controller module.Wall-mounting housing(extra code /640)base material PCOperating positionunrestrictedWeightInstrument for switchgear cabinet(basic version)approx. 320gWall-mounting housing(extra code /640)approx. 1400 gStandard accessories– 2 mounting brackets– 1 seal (housing/panel)– 1 Operating Manual B 20.2535.0.1OptionWall-mounting housingextra code /640Housing with door at frontType 2 FGE-150-2/185On request, the JUMO dTRANS Rd 01 canalso be supplied built into a surfacemountinghousing. The housing is suitablefor wall-mounting or for mounting on a 35 x7.5 mm DIN rail to EN 50 022.The housing is sturdy and provides IP67protection for the built-in instrument and isfitted with six cable glands. Unused cableglands can be tightly sealed using the blindgrommets that are included in the delivery.The electrical connection is made viascrew terminals (wire cross-section up to2.5 mm 2 ).Standard accessories– 2 mounting brackets (not with extracode /640 (wall-mounting housing))– 1 BNC connector (not with extra code/640 (wall-mounting housing))– 1 seal for panel mounting (not withextra code /640 (wall-mountinghousing))– sundry items for wall-mounting (onlywith extra code /640 (wall-mountinghousing))– sundry items for DIN rail mounting (onlywith extra code /640 (wall-mountinghousing))– 1 Operating Manual B 20.2535.0.1Optional accessoryInterface Description B 20.2530.208.04 / 00363906
JUMO GmbH & Co. KG• 36035 Fulda, GermanyData Sheet 20.2535 Page 5/9ParametersParameter Display Value range CommentAlarm tolerance AL1 0000 — 9999 mVThe alarm is only generated when the level(setpoint + alarm tolerance) has beenpassed, and the alarm delay time haselapsed (only effective for pulse width / pulsefrequency controllers. It is internally fixed at 0for limit controllers).Alarm delay AL2 0 — 6000 secDelay time before the alarm contact isactivatedProportional band 1 Pb1 1 — 9999 mVProportional band 2 Pb2 1 — 9999 mVInfluences the P action of the controllerDerivative time 1dt1Influences the D action of the controllerDerivative time 2dt2If dt = 0, the controller has no D action.0 — 9999 secReset time 1 rt1 Influences the I action of the controllerReset time 2rt2If rt = 0, the controller has no I action.Minimum ON time 1(for limit controller orpulse width controller)orminimum pulse width 1(for pulse frequency controller)Minimum ON time 2(for limit controller orpulse width controller)orminimum pulse width 2(for pulse frequency controller)Switching differential 1Switching differential 2Switching differential 3Switching differential 4Switching differential 5Pull-in delay 1Pull-in delay 2Pull-in delay 3Pull-in delay 4Pull-in delay 5Drop-out delay 1tr1tr2HYS1HYS2HYS3HYS4HYS5Ond1Ond2Ond3Ond4Ond5Ofd10.2 — 999.9 sec0.2 — 999.9 sec1 — 9999 mVDetermined by the technical data of thedosing device (solenoid valve, dosing pump)Defines the switch-off point for the controlcontacts0.0 — 999.9 sec Delay time before the contact is activatedDrop-out delay 2Ofd2Drop-out delay 3Ofd3 0.2 — 999.9 secDelay time until the contact moves back tothe initial positionDrop-out delay 4Ofd4Drop-out delay 5Ofd5Pulse frequency 1Fr1Maximum frequency of pulses (operating a0 — 150 pulse/minPulse frequency 2Fr2dosing pump, for instance)Pulse period 1Cy1Pulse period 2Cy22.0 — 999.9 sec The period in which a pulse is modulatedOutput level limit, output 1 Y1 0 — 100% The maximum output level for a pulse width /Output level limit, output 2 Y2 0 — 100%pulse frequency controllerActuator time tt 15 — 3000 sec For modulating controller08.04 / 00363906
Page 1 and 2: JUMO GmbH & Co. KGDelivery address:
Page 3: JUMO GmbH & Co. KG • 36035 Fulda,
Page 7 and 8: JUMO GmbH & Co. KG • 36035 Fulda,
Page 9: JUMO GmbH & Co. KG • 36035 Fulda,

dTRANS Rd 01 ÂµP Transmitter / Controller for redox potential (ORP)

Create successful ePaper yourself

Delete template?

Save as template?