Small Tool Instruments and Data Management

“DIGIMATIC” DMX-Transmitters• Measuring device interface for transmitting measured values from Mitutoyo measuring instrumentsinto appropriate application programs. The instrument communicates with the PC via a driverprogram generally included with the CAQ software. The application defines what measuring devicesare to be read in, how often the measurement is to be repeated etc.Type DMX–1 serialNo. 011216 DMX–1Type DMX–1 USBNo. 011442 DMX–1 USBType DMX–2 serialNo. 011189 DMX–2Type DMX–2 USBNo. 011443 DMX–2 USBType DMX–3The DMX–1 serial is a microcontrolled interface for connectinga measurement device with “DIGIMATIC” interface to anexternal computer featuring RS–232 C interface. The deviceworks without external power supply (The handshake linesRTS and DTR are necessary for the power supply.)Incl. footswitch connector*.* Data transfer can be initiated with footswitch available asoptional accessory.The DMX–1 USB is a microcontrolled interface for connectinga measurement device with “DIGIMATIC” interface to anexternal computer featuring USB interface. The devicereports as “virtual” RS-232 C interface to the computer.Incl. footswitch connector*.* Data transfer can be initiated with footswitch available asoptional accessory.The DMX–2 serial is a microcontrolled interface for connectingtwo measurement devices with “DIGIMATIC” interface tothe RS-232 C interface of a computer. The device workswithout external power supply (The handshake lines RTS andDTR are necessary for the power supply.)Data transfer can be initiated with footswitch and adapterfor footswitch available as optional accessory.The DMX–2 USB is a microcontrolled interface for connectingtwo measurement devices with “DIGIMATIC” interface to theUSB interface of a computer. The device reports, dependingon setting as “virtual” RS-232 C interface or as keyboard tothe computerIncl. footswitch connector*.* Data transfer can be initiated with footswitch available asoptional accessory.Das DMX–3 allows for connecting three measurementdevices featuring “DIGIMATIC” interfaces to the RS–232 Cinterfaces. Power supply with AC/DC adapter (standardaccessory).Incl. footswitch connector*.* Data transfer can be initiated with footswitch available asoptional accessory.No. 011253Interface parametersTypeDMX–1 serialNo. 011216Data output:(D-SUB 9) RS–232 CNumber of input channels: 1Baud rate:9600 BaudData bits: 8Stop bits: 1Parity:noneTypeDMX–1 USBNo. 011442Data output:USB with RS–232 C (serial)EmulationNumber of input channels: 1Optional accessoriesNo. 011196 Connecting cable for computerD-SUB 9 – D-SUB 9 (2 m)No. 937179 T FootswitchInterface parametersTypeDMX–2 serialNo. 011189Data output(D-SUB 9) RS–232 CNumber of input channels: 2Baud rate:9600 BaudData bits: 8Stop bits: 1Parity:noneTypeDMX–2 USBNo. 011443Data output:USB with RS–232 C (serial)or probe EmulationOptional accessoriesNo. 011197 Connecting cable for computerD-SUB 25 – D-SUB 9 (0,2 m)No. 011119 Connecting cable for computerD-SUB 25 – D-SUB 9 (2 m)No. I–1502067 Connecting cable for computerD-SUB 25 – D-SUB 25 (2 m)No. 011193 Adapter for footswitchNo. 937179 T Footswitch011193Interface parametersTypeDMX–3No. 011253Data output:(D-SUB 9) RS–232 CNumber of input channels: 3Baud rate:1200/9600 Baud(adustable with jumper)Data bits: 8Stop bits: 1Parity:noneOptional accessoriesNo. 011196Connecting cable for computerD-SUB 9 – D-SUB 9 (2 m)No. 937179 T FootswitchNo. 011444 Adapter cable USB to RS-232C20