Honeywell-Confidential - Seam-avionic

Honeywell Bendix/King AV8OR User’s Guide• Req Runway Surface: The options are Any and Hard Only.The Required Runway Surface type is also used when usingthe DIRECT TO soft key to search for the nearest airports inVFR Moving Map mode. When runway surface is set to ANY,airports with either hard or soft runways are displayed. Whensurface is set to HARD ONLY, only airports with hard surfacerunways are displayed and soft-runway airports are ignored.• MIN R/W LENGTH: This field contains the minimum length ofthe main runway at those airports that are included when theten nearest airports are shown. Select the length field and useset the minimum length value. The available values arespecified in steps of 100 feet from 0 to 16,000 feet or in stepsof 50 meters from 0 to 4900 meters when the runway lengthunits are set to meters. By setting a minimum length, airportswith shorter runway lengths are not included in the search forthe closest airport. To disable this filter set the minimumrunway length to 00000 feet.MAP SETUPThe initial Map Systems Setup Options page allows differentmapping options to be configured. Refer to Figure 2-197.Figure 2-197: System Setup – Map System Setup OptionsThere are five groups of features for each of the map layers. Theyare: Common Features, Point Features, Line Features, Airspace andOverlay. Each shows in a tab across the top.Tap the SAVE & EXIT soft key to save any changes and go back tothe previous menu.Tap the EDIT soft key to edit the data for the tabbed screen on top.System Setup Function 7450-0840-01Page 2-148© Honeywell International Inc. Do not copy without express permission of HoneywellRev 4 Jan 2011