Honeywell-Confidential - Seam-avionic

Honeywell Bendix/King AV8OR User’s GuideTap the RESET COLUMNS soft key to set the column heading totheir factory defaults.DEMO MODE SETUPThe data in the Demo Mode Setup window Figure 3-207 is used tocontrol the starting position, altitude, speed and initial track of thesimulator. You must select DEMO MODE on initial turn on to showthis menu selection See the Demo Mode section on page 2-4 forinstructions on how to enable Demo Mode.Figure 2-207: System Setup – Demo Mode SetupScroll up and down between the options, and set the values.• Ident: Use the Ident field to assign a name to the Initial Position(manual entry). Highlight the Ident and enter the Ident inputentry, the virtual keyboard is displayed. Input the Ident namecharacters. The system will search for similar Ident names in thedatabase based on the character being input, as shown in thefigure below. As an example when the user inputs LOS ANG,the system will display similar Ident names such as LOSANGELES/VAN NUYS. This function is convenient for the userby finishing the input of the full Ident name. The user can alsodefine a new name for the Ident.7450-0840-01 System Setup FunctionRev 4 Jan 2011 Page 2-159© Honeywell International Inc. Do not copy without express permission of Honeywell