PD140SVR - CEIA S.p.A.

PD140SVRVERY HIGH SENSITIVITYENHANCED HAND HELD METAL DETECTORFEATURE HIGHLIGHTS• Very High Sensitivity• Detection of both Magnetic and Non-MagneticMetals• Optical, Acoustical and Vibration Alarm• Long Battery Life• Special Ergonomic Shape• Very High Reliability• Easy to Use• Self-Calibrating• Fast Inductive Battery ChargerSUPERIOR DETECTION,ERGONOMICS,VERY COMFORTABLETO USETHE SPECIAL ERGONOMIC SHAPE OF THEDEVICE ALLOWS INSPECTION WITHOUT THEINTERFERENCE OF THE OPERATOR’S FINGERSV140 CARRYING CASEwww.ceia.net

PD140SVR ENHANCED HAND HELD METAL DETECTORThe PD140SVR Enhanced Hand Held Metal Detector is a high sensitivity devicedesigned to detect magnetic and non-magnetic metal masses. The unit can be usedto detect weapons, detonators and other small pieces of metal concealed in baggageor correspondence.The bidirectional detection probe allows both sides to detect metals evenly. Thesensitivity of the surface is enhanced by the shape making operation of the devicereliable and easy to operate.The device is supplied with a standard test piece for functional verification. Customcalibration samples can be supplied in accordance with the Security Regulations inforce.TECHNICAL FEATURESPOWER SUPPLY9V rechargeable Ni-MH batterySimultaneous optical and acoustic alarm.THREE-POSITION SWITCH WITH SELECTIONBuilt-in buzzer (75 dBA at a distance of 90 cm)OF TWO DIFFERENT ALARM MODESOptical alarm and handle vibrationPre-calibrated sensitivity that can be modified by using an internal trimmerBATTERY LIFE*Optical and acoustic alarm: 40 hours typical**Optical and vibration alarm: 30 hours typical**Power on (green light)INDICATOR LAMPS FORAlarm (red light)Low battery charge (blinking yellow light)Five different alarm tones, selected from the factory, identified by the last digit of the serial numberOPERATING TEMPERATURE -15°C to 65° C (relative humidity: 0 to 95% )Manufactured in grey, shock-resistant Polycarbonate and ABS blendDIMENSIONS340 x 80 x 55 mmWEIGHT (WITH BATTERY) 0.400 kgCONFORMS TO THE INTERNATIONAL STANDARDS currently applicable for electrical safety, E.M.C. and to theapplicable CE regulations* 10% alarm operation , 90% quiescent operation ** NiMH 9V – 150mAh cellOPERATOR CONTROLSAND SIGNALLING DEVICES1 2 31 ALARM Red Light: Alarm Signalling2 LOW BATTERY Yellow light:Low Battery Signalling(blinking)3 POWER Green light: “Power on”and “Ready” status Signalling.45When charging on the BC140F,indicates the status of the charge4 POWER/MODE Switch• Left position: visual and audible alarmsignalling• Right position: visual and vibrationalarm signalling5 ALARM BUZZERBC140FFAST INDUCTIVE BATTERY CHARGERV140CARRYING CASEBelt holsterThe BC140F unit provides recharging, withoutelectrical contact, of the NiMH batteries inthe PD140SVR Metal Detectors. The BC140Fbattery charger is designed to be able tobe connected in cascade with other similardevices.TECHNICAL FEATURESPOWER SUPPLY: 90-265Vrms, 50/60 Hz, 4 WRECHARGING TIME: 4 hours or less (complete cycle)ON/OFF switch with indicator lampConnection in cascade with other similar devices(up to 20 units)DIMENSIONS: 82 x 155 x 97 (h) mmWEIGHT: 0.500 kgLENGTH OF MAINS CABLE: 1.80 mLength of cable for connecting units in cascade: 0.17 mManufactured in grey, shock-resistant ABSConforms to the international standards currentlyapplicable for electrical safety, E.M.C. and to theapplicable CE regulationsThe V140 carrying-case, in shock-resistantmaterial, is designed to contain the followingitems: a PD140SVR Hand Held Metal Detector,a test piece, a BC140F fast battery-charger, apower supply cable and the instructions for use.TECHNICAL FEATURESDIMENSIONS: 445 x 300 x 180 mmWEIGHT: 2.3 kg including PD140SVR and batterychargerShock-resistant ABS construction and the specialstorage compartments make the V140 carryingcasethe ideal, safest and most compact means oftransporting the PD140SVRConforms to the international standards currentlyapplicable for electrical safety, E.M.C. and to theapplicable CE regulationsGREEN LEDblinking: charge inprogresssteady after blinking:charge completedPOWER LAMPON/OFF SWITCHBC140FDP010GB100K2 - 38210Zona Industriale 54/G, 52041 Viciomaggio - Arezzo (ITALY)Tel.: +39 0575 4181 Fax: +39 0575 418298 E-mail: infosecurity@ceia-spa.comwww.ceia.netCEIA reserves the right to make changes, at any moment and without notice, to the models (including programming), theiraccessories and optionals, to the prices and conditions of sale