2008 HB Dodge Durango Owner Manual

134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
To Disable A Transmitter Linked to Memory
1. Turn the ignition switch to the OFF position and
remove the key.
2. Press and release the memory SET (S) button located
on the driver’s door.
3. Within 10 seconds, press and release the UNLOCK
button on the Remote Keyless Entry transmitter.
To disable another transmitter linked to either memory
position, repeat steps 1-3 for each transmitter.
NOTE: The capability to link Remote Keyless Entry
transmitters to memory is enabled when delivered from
the factory. The capability to link Remote Keyless Entry
transmitters to memory can be disabled (or later reenabled)
by a qualified DaimlerChrysler representative. For
vehicles equipped with the Electronic vehicle Information
Center (EVIC), refer to �Personal Settings (Customer
Programmable Features)� under �Electronic Vehicle Information
Center (EVIC) in Section 3 of this manual for
details.
Self-Limiting Control
To improve vehicle reliability, the memory system includes
a self-limiting control for full travel positioning of
power seat and Adjustable Pedal movement (all directions).
This self-limiting control may however develop an
unintended movement limitation if an obstruction is
encountered at sometime during usage. One example of
such an occurrence may include a box or package obstructing
the full rearward movement of the driver’s seat.
Once the obstruction is removed, the self-limiting control
may be restored to maximum position. The self-limiting
control may be restored by first reaching the recently
limited or obstructed position, then release and reactivate
the same button or buttons. Continued seat travel beyond
the obstructed position will indicate the recently encountered
self-limitation has been cleared.