Patient Information Management System (PIMS) V. 5.3 Installation ...
Patient Information Management System (PIMS) V. 5.3 Installation ...
Patient Information Management System (PIMS) V. 5.3 Installation ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DHCP Patch Display Page: 1<br />
=============================================================================<br />
Run Date: AUG 2, 1993 Designation: OR*2.5*15<br />
Package : OR - ORDER ENTRY/RESULTS RE Priority : MANDATORY<br />
Version : 2.5 SEQ #9 St atus : VERIFIED<br />
=============================================================================<br />
Subject: Backwards Incompatibility<br />
Category: ROUTINE<br />
Description:<br />
===========<br />
INSTALLATION:<br />
Users need not be off the system when applying this p atch; however, it<br />
should be done during off-peak time since there is always a chance that<br />
someone might be errored off the system because they were using an option<br />
that called the routine being edited.<br />
SPECIAL NOTE: The XQOR* routines are a set of u tilities for the Protocol<br />
file (101) and are released as part of Order Entry/Results Reporting (OR)<br />
package. They were released with a version number of 6.7 and may become part<br />
of the kernel package at a later date. For the time being any patches to<br />
XQOR namespaced routines will be released under the OE/RR package.<br />
PREVIOUS PATCHES:<br />
The routine XQORO has previously been patched with OR*2.5*14<br />
PROBLEM: Backwards incompatibility with OE/RR 1.96. The new release of <strong>PIMS</strong><br />
<strong>5.3</strong> requires the new functionality provided in the XQOR version 6.7 routines<br />
that were released with OE/RR version 2.5. Since <strong>PIMS</strong> <strong>5.3</strong> does not require<br />
OE/RR 2.5 to be installed, they are exporting the XQOR routines with their<br />
release to be loaded if OE/RR 2.5 is not present. It is then possible to<br />
have version 6.7 of XQOR routines and version 1.96 of OE/RR routines. The<br />
incompatibility occurs because the routine XQORO references the routine OR4<br />
that does not exist in 1.96.<br />
This patch corrects the incompatibility by cal ling an entry point in OR1.<br />
Routine <strong>Information</strong>:<br />
====================<br />
Routine Name: XQORO<br />
Description of Changes:<br />
Line: EXIT+3<br />
r OR4<br />
w OR1<br />
Line now looks like:<br />
D RSTR,AFT^OR1,RSTR K<br />
^TMP("XQORS",$J,0,"CTXT","ADD"),^TMP("XQORS",$J,XQORS,"C"<br />
Routine Checksum:<br />
11401787
Change language