Product Catalog - MK Products

Call (800) 787-9707OrbitalAccessoriesWeld fitting collets, mandrels and special tooling are available for holding and aligning your favorite weld fittings: short ferrule, tank spud,threaded male and female fittings. In most cases, you just provide the name of your weld fitting manufacturer with their part number, and MKProducts will do the rest. Consult the MK Products price book for part numbers and pricing.Collets, Flush and ExtendedA set of collets for models 5001~5003 are defined as top and bottom halves for each side of the weldhead. Typically, 2 sets are required perweldhead. A set of collets for models 4000 and 5006 are defined as 3 each 120° segments for each side of the weldhead. Typically, 2 setsare required per weldhead. Consult price book for details and part numbers.Flush ColletsMiniMicroExtended ColletsMiniMicroCollet ScrewsCollet Screws0.15”CopperHeads ®CopperHeads ®Collet Screws5001.....0.75”5002.....1.00”5003.....1.50”DiamondBackDiamondBackCollet ScrewsTungsten, Tube and Pipe2% Ceriated electrodes, pre-ground and cut to length, 18°included angle, .015” flat tip, .040”, 1/16” or 3/32” diameter,10 pieces per package. Consult price book for details andpart numbers.Locating MandrelsLocating mandrels are used for precise and repeatable tubeand weld fitting positioning and alignment. Consult price bookfor details and part numbers.29