FRANKE SALES CATALOGUE

FOOD WASTE DISPOSAL UNITS
IMAGE TYPE/MODEL ITEM NUMBER
H50751S Wall Mounted
Control Box
H50751H
132
Front elevation
Light duty sink fitting waste disposal units
Disposal units designed to be installed into catering sinks with a 89mm waste
outlet. Suitable for installation in cafes, pubs and restaurants serving less than
175 meals per day. The durable units will dispose of plate waste, vegetables
and peelings, fine fish and chicken bones.
0.5hp 780W 1phase sink fitting light duty waste disposal unit with
wall mounted starter. IP rating: IP20. SD280
0.75hp 1300W 1phase sink fitting light duty waste disposal unit with
wall mounted starter. IP rating: IP20. SD301
Sink fitting waste disposal units
The sink fitting waste disposal units are designed to fit into an 89mm waste
outlet. The motor is activated using the wall mounted control box supplied.
For planning chart and all technical details relating to these product see
previous page.
0.75hp Sink fitting waste disposal unit, single phase H50751S
0.75hp Sink fitting waste disposal unit, 3 phase H50753S
Inset Hopper Waste Disposal Units
Inset hopper models are suitable for welding into dishwash tabling and are
available with a 0.75hp motor. They can also be fitted to give either front, left
or right hand side feed, depending on the size of tabling. The hopper and motor
are supplied separately for assembly on site. A magnetic cutlery saver is fitted
as standard. The motor is activated by using the front control buttons but a
remote wall mounted control box can be supplied as an extra. For planning
chart and all technical details relating to this product see previous page.
0.75hp Inset hopper waste disposal unit, 1 phase H50751H
0.75hp Inset hopper waste disposal unit, 3 phase H50753H