You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MEDICAL SINKS<br />
IMAGE TYPE/MODEL ITEM NUMBER<br />
Note: All Illustrations show unit fitted with stainless steel<br />
front leg supports<br />
Taphole Positions<br />
Single bowl, double drainer, no tapholes<br />
A single bowl/double drainer sink manufactured from 1.2mm thick, grade<br />
1.4301 (304) stainless steel, satin polish finish. The sink top is turned down<br />
on all four edges and incorporates a wet area recess. The bowls are prepared<br />
for a 38mm waste outlet.<br />
NOTE: It is not possible to fit an overflow. The sink top can either be mounted<br />
on wall brackets or front leg supports - see extras listed below.<br />
external: 1500x600x220mm bowl: 500x400x200mm G22047N<br />
single bowl, double drainer, with 2 tapholes at 200mm centres<br />
external: 1500x600x220mm bowl: 500x400x200mm G22047NT<br />
Extras:<br />
38mm flush grated waste outlet F2068<br />
Stainless steel cantilever bracket pair G26523L/R<br />
Stainless steel front leg support pair G26524L/R<br />
HTM STANDARD 64<br />
Single bowl/single drainer sink<br />
A range of 600mm wide sinks manufactured from 0.9mm thick austenitic<br />
stainless steel, satin polish finish. The rear of the unit incorporates an<br />
upstand with the remaining three sides all turned down, suitable for mounting<br />
onto a cabinet. All the sinks have the bowl prepared for 38mm waste outlet.<br />
For an extra cost the 250mm deep bowl can be prepared for a waste disposal<br />
unit, however the waste outlet will be repositioned to the front of the bowl<br />
and not in the rear as standard. All waste fittings are available as extras.<br />
external: 1000x600x200mm bowl: 400x400x180mm B20081L/R<br />
Extras:<br />
38mm waste, plug, chain and overflow (for B2 models) F2119<br />
38mm vulcathene waste and plug, (no overflow) (for B5 models) F2039<br />
Set of four cabinet fixing clips F6010<br />
Single bowl/double drainer sink<br />
A range of 600mm wide sinks manufactured from 0.9mm thick austenitic<br />
stainless steel, satin polish finish. The rear of the unit incorporates an<br />
upstand with the remaining three sides all turned down, suitable for mounting<br />
onto a cabinet. All the sinks have the bowl prepared for 38mm waste outlet.<br />
For an extra cost the 250mm deep bowl can be prepared for a waste disposal<br />
unit, however the waste outlet will be repositioned to the front of the bowl<br />
and not in the rear as standard. All waste fittings are available as extras.<br />
NOTE: With 2 tapholes provided at 180 centres. L or R refers to the handing<br />
of the drainer ie. left or right when facing front of unit.<br />
external: 1500x600x200 bowl: 400x400x180 B20074D<br />
Extras:<br />
38mm waste, plug, chain and overflow (for B2 models) F2119<br />
Set of four cabinet fixing clips F6010<br />
97