Cercon ceram kiss - DENTSPLY Prosthetics

Instructions for use 1722 2326 27 28Figure 26: It is only now that you should turn tothe details of the tooth. Dusting with silver powderis a good idea, since this will reduce theappearance of the nascent restoration to itspure shape.You should use other tools such as a pencil orsimilar to find and draw out the line of the marginalridges.If the shape is internally consistent, you shouldaddress the surface one more time, becausethe reflections on the surface contribute sub -s tantially toward a harmonious integration of therestoration with the remainder of the dentition.When judging the surface, take a close look atthe adjacent teeth to find out exactly how theirsurface is structured.Figure 27: Before the glaze firing, the crown canbe polished one more time using standardrubber polishing wheels or points. This will makethe surface even more homogenous, and youcan set a lower temperature for glaze firing.Figure 28: It is also recommended to check thefinal shape and surface of the entire restorationone last time by applying silver powder.Clean the restoration thoroughly with steam andglaze as per the firing recommendations.