Vinyl Corner Beads Vinyl Corner Bead

Vinyl Partition End Cap 1/2" (PC50) or 5/8" (PC58) & Vinyl 093 Drywall Control Joint (VCJT)
166
Quickly finishes doorways, knee walls and wall ends.
■ One-piece installed cost savings.
■ Rust proof and dent resistant.
■ Simplifies product selection.
■ Easily forms arches or curves.
■ Available for 1/2“ and 5/8“ gypsum wallboard.
request a quote online @
Dietrich vinyl
partition
end caps
quickly finish
doorways, knee
walls and wall
ends by
capping the
ends of a wall
and providing
a finish face.
Vinyl Partition End Cap for 1/2" Board (PC50) or 5/8" Board (PC58)
vinyl partition
end caps are
designed with a
special factory punched “T”
slotted flange. The “T” slots can be
cut easily to form arches or curves.
This product provides time (cost) savings through single-piece
installation versus installing two corner beads.
You also use less compound than two corner bead
applications. Multiple perforations enhance strength of joint
compound adhesion. Easy to cut, rust proof and dent resistant.
DMF Size Weight/Carton Packaging
Product
Code Inches
Width
(mm) ft.
Length
(m)
lbs. (kg)
Pcs./
Box
Boxes/
Skid
PC50 2-1/2 63.5 8 2.44 12.5 5.7 12 25
(1/2") 3-5/8 92.1 10 3.05 15.6 7.1 12 25
PC58 2-1/2 63.5 8 2.44 12.5 5.7 10 25
(5/8") 3-5/8 92.1 10 3.05 15.6 7.1 10 25
Used to relieve expansion and contraction stresses.
Dietrich 093 vinyl control joint is applied between abutting gypsum
panels and is used to relieve stresses of expansion and contraction
of drywall in large ceiling and wall expanses over 30'. Control joints
are installed from door header to ceiling, from floor to ceiling in
long partition runs and from wall to wall in large ceiling areas.
Plastic tape protects 1/4" opening x 7/16" deep reveal and is removed
after compound is applied and finished. Where sound transmission is a
consideration, an approved seal must be provided behind control joint.
Use metal control joints wherever fire ratings are a concern.
093 Vinyl Drywall Control Joint (VCJT)
■ Use with drywall or veneer plaster.
■ Moisture resistant and rust proof.
■ Maintains profile after cutting.
■ Perforations enhance compound adhesion.
Ceiling Application
Wall Application
Partition End Cap
DMF Size Weight/Carton Packaging
Product
Code Inches
Width
(mm) ft.
Length
(m)
lbs. (kg)
Pcs./
Box
Boxes/
Skid
VCJT 3/32 2.4 10 3.05 42.0 19.0 60 25
dietrich metalframing •com The place to stop…before the building starts! SM
093 Vinyl
Control
Joint