You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Styles & Types<br />
<strong>Vinyl</strong> <strong>Corner</strong> <strong>Bead</strong> is a<br />
rigid, easy-to-apply corner<br />
reinforcement that<br />
may be nail or staple<br />
applied. Flanges are<br />
1-1/4" wide and are perforated<br />
to aid joint compound<br />
bond. Rigid vinyl<br />
resists dents, thermal<br />
transmission and will<br />
not corrode.<br />
<strong>Vinyl</strong> Splayed Bullnose <strong>Corner</strong> <strong>Bead</strong> fits off-angle corners<br />
that typically are 120˚–135˚.<br />
1-1/4" Archway <strong>Corner</strong> <strong>Bead</strong> has the same properties as<br />
regular 1-1/4" vinyl corner bead, plus it’s manufactured with<br />
notched tabs on one flange to permit flexible forming of<br />
archway edges. Available in 8' and 10' lengths.<br />
All Dietrich vinyl products readily accept finish treatments<br />
such as paint and spray or roll-on textures.<br />
90˚ Bullnose <strong>Corner</strong> <strong>Bead</strong> comes in a choice of 3/4" or<br />
more dramatic 1-1/2" radius to make rounded, more contemporary<br />
corners. Fits 90˚ corners.<br />
<strong>Vinyl</strong> 90˚ Bullnose Archway <strong>Corner</strong> <strong>Bead</strong> provides a<br />
bullnose treatment around arched openings. Tabs enable<br />
bead to be arched to a 10" inside radius or 18" outside<br />
radius.<br />
OVER 850+ <strong>Vinyl</strong> Products<br />
For more information or to contact a sales representative, see page 3.<br />
Overview<br />
3/4" <strong>Vinyl</strong> Bullnose Kerfed <strong>Corner</strong> <strong>Bead</strong> is the same as<br />
regular 3/4" radius bead, except it is kerfed so that the leg<br />
fits the channel of door and window jambs for smooth,<br />
rounded encasement.<br />
<strong>Vinyl</strong> J-Trim provides a finished edge at gypsum board<br />
stops around door and window openings and at ceiling<br />
intersections. Requires no joint compound. Rigid vinyl is not<br />
a thermal transmitter and helps stop condensation where<br />
board terminates at exterior metal surfaces, such as window<br />
frames and mullions. It’s rustproof and dent resistant.<br />
Rip <strong>Bead</strong> vinyl beads<br />
produce an exceptional<br />
finish at the intersection<br />
of gypsum board and<br />
ceiling grid. Once joint<br />
compound is applied,<br />
the tear-away strip is<br />
removed, producing a<br />
crisp, clean edge.<br />
<strong>Vinyl</strong> L-Stop <strong>Bead</strong> is a<br />
convenient finished termination<br />
for gypsum panel surfaces. <strong>Bead</strong> may be nail or staple<br />
attached to the stud through the bead flange. The flange<br />
is 1-1/4" wide and is perforated to aid joint compound bond.<br />
Rigid vinyl is rust proof and dent resistant. Surface is treated<br />
with an alkyd texture to help joint compound and paint<br />
adhere.<br />
The products in this section are limited to common drywall and veneer plaster finishing accessories.<br />
An extensive array of vinyl products is available through our vinyl specialty company, <strong>Vinyl</strong> Corp.<br />
<strong>Vinyl</strong> Corp. is one of the largest full-line vinyl bead and trim manufacturers in the U.S. Product categories<br />
include vinyl beads, trims and control joints for Stucco/Plaster, Drywall, Exterior Insulation<br />
Finish Systems (EIFS), and Direct-applied Exterior Finish Systems (DEFS).<br />
<strong>Vinyl</strong> Corp. is committed to meeting the most complex challenges in the wall and ceiling industry<br />
through innovative product design, exacting manufacturing tolerances and the most complete<br />
selection of accessories in the industry. Contact one of <strong>Vinyl</strong> Corp.’s customer care representatives<br />
at 800-648-4695.<br />
<strong>Vinyl</strong> <strong><strong>Bead</strong>s</strong> & Trims Overview<br />
155
Change language