Receiver of our pricelist for heavy plates - Dillinger Hütte GTS

Aktien-Gesellschaft der Dillinger Hüttenwerke D-66748 Dillingen/Saar
Receiver of our pricelist
for heavy plates
I Ihre Zeichen Ihre Nachricht vom Unsere Zeichen
VK-AUE/WL
Modifications of our pricelist for heavy plates
Dear Sirs and Madames
Telefon
06831/47-2427
Telefax
06831/47-3082
Dillingen/Saar,
10.12.2010
Please note that the following changes in our heavyplate price list will come into effect on
January 1 st 2011.
Here are the main changes:
Point 0 Revision status
Point 2 Upcharges by qualities, plates weighing > 25 t extra of 75,- €/t
Point 2.1.2 Fine-grain structural steels, adaptation of the dimensional range
Point 2.3 Steels for pressure vessel construction, adaptation of the dimensional range
Point 3.3 Upcharge for plate weight > 18

0 Revision status
Page Revision Date
0.1 14 01.01.2011
1.1 2 01.10.2008
2.1 1 01.01.2011
2.2 0 01.01.2008
2.3 1 01.01.2011
2.4 0 01.01.2008
2.5 0 01.01.2008
2.6 0 01.01.2008
2.7 0 01.01.2008
2.8 1 01.01.2011
2.9 1 01.01.2011
2.10 1 01.01.2011
2.11 0 01.01.2008
2.12 0 01.01.2008
2.13 1 01.04.2009
2.14 0 01.01.2008
2.15 0 01.01.2008
2.16 0 01.01.2008
2.17 0 01.01.2008
3.1 2 01.10.2010
3.2 1 01.01.2011
4.1 0 01.01.2008
5.1 0 01.01.2008
6.1 1 01.10.2008
7.1 12 01.01.2011
7.2 12 01.01.2011
7.3 12 01.01.2011
7.4 3 01.10.2008
Page Revision Date
8.1 1 01.04.2009
8.2 1 01.04.2009
9.1 0 01.01.2008
9.2 0 01.01.2008
10.1 0 01.01.2008
11.1 0 01.01.2008
11.2 0 01.01.2008
11.3 0 01.01.2008
12.1 3 01.01.2010
12.2 4 01.01.2011
13.1 2 01.03.2010
13.2 1 01.03.2010
14.1 0 01.01.2008
14.2 0 01.01.2008
15.1 2 01.03.2010
15.2 2 01.03.2010
15.3 1 01.08.2008
15.4 1 01.08.2008
15.5 2 01.03.2010
15.6 1 01.01.2009
16.1 2 01.01.2011
16.2 1 01.08.2008
16.3 1 01.08.2008
16.4 1 01.04.2010
Heavy plate steel price list GTS Industries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 14 Page 0.1

All prices are in EURO per 1000 kg (EUR per ton)
2 Upcharges by quality
+) Plus alloy and/or scrap-price upcharges/discounts valid on the day of dispatch (see item 7).
The quality upcharges shown below are listed according to range of dimensions (plate thickness). Regardless
of plate thickness, plates weighing > 25 tons are subject to the quality upcharges for the dimension range 1,
as well as a EURO 75 per ton upcharge for all steel grades. In addition, the upcharges listed under item 3.3 –
plate weights – also will be applied.
The objective inspection contained in the additional charges is shown in the different parts.
- Lot makeup necessary to meet standards and delivery conditions within a single melt (for example, per
melt and 40 tons), or the necessary number of sample sets per rolling plate (at one or both ends), are
included in the given quality upcharges.
- During a notched-bar impact test, 3 individual samples in a single sample form, temperature and direction
will be tested.
A range of possible additional requirements is listed in the various standards and delivery conditions. When
the customer has no need of these additional requirements and the order contains no corresponding
requirements, the product will be delivered according to the minimum applicable standards and delivery
conditions. Orders with additional requirements will be calculated according to our price list.
Summary of corresponding steel grades
2.1 Structural Steel
2.2 Shipbuilding steels
2.3 Steels for pressure vessel construction
2.4 Steels for case hardening and tempering and quenching
2.5 Steels for cold forming
2.6 Wear-resistant steels
2.7 Multiple grades
Heavy plate steel price list GTSIndustries SA
Dillinger Hüttenwerke AG 01.01.2011 Revision 1 Page 2.1

According EN 10025-2, tests and certifications are included only when they are ordered.
Steel quality S185 is delivered with only a works certification according to 2.1, which must be agreed when
placing the order.
For other steels, the customer’s choice of certification, according to EN 10204, will be issued:
Either a works certification of compliance [2.1]
or a works test certification with chemical analysis only [2.2]
or a works test certification with analysis of physical properties [2.2*]
or an inspection certificate [3.1*]
or an inspection certificate [3.2*]
* Charged according to item 8.
With the order of the inspection certificate 3.1 or above, each melt of all steels (except S185) will be subjected
to a tensile test. Each melt of steels in the quality class J0, J2, and K2 also will be subjected to a notched-bar
impact test.
For steels of the JR quality group the notch impact test is only carried out if it is explicitly ordered or if it is
stipulated by technical regulations such as AD2000.
(cost calculation of both tests in accordance with item 9).
2.1.2 Fine-grain structural steels for steel construction according to EN 10025-3
normalized/normalizing rolled
Steel name Steel number Dimension range 1
Thickness in mm
Standard range
Dimension range 2
Thickness in mm
S275N 1.0490 ≤ 130 53 > 130 128
S355N 1.0545 ≤ 130 83 > 130 158
S420N 1.8902 ≤ 130 143 +) > 130 218 +)
S460N 1.8901 ≤ 130 188 +) > 130 263 +)
Low-temperature range
S275NL 1.0491 ≤ 120 73 > 120 148
S355NL 1.0546 ≤ 120 103 > 120 178
S420NL 1.8912 ≤ 120 163 +) > 120 238 +)
S460NL 1.8903 ≤ 120 208 +) > 120 283 +)
Testing included:
Tensile test and notched-bar impact test on each melt Certification: 3.1
By deliveries according to requirements of DBS, the additional charges for the possibly special demands
on chemical composition, delivery condition, inspections (weld bend test, US testing, notch impact test,
inspection) are additionally calculated according to price list.
Heavy plate steel price list GTSIndustries SA
Dillinger Hüttenwerke AG 01.01.2011 Revision 1 Page 2.3

2.3 Steels for pressure vessel construction
2.3.1 Steels for simple pressure vessels made to EN 10207
Steel name Steel number Dimension range 1
Thickness in mm
Dimension range 2
Thickness in mm
P235S 1.0112 ≤ 120 45 > 120 120
P265S 1.0130 ≤ 120 50 > 120 125
P275SL 1.1100 ≤ 120 77 > 120 152
Testing included:
One tensile test and one notched-bar impact test on each melt Certification: 3.1
2.3.2 Unalloyed and alloyed high-temperature steels made to EN 10028-2
P235GH 1.0345 ≤ 120 79 > 120 154
P265GH 1.0425 ≤ 120 84 > 120 159
P295GH 1.0481 ≤ 120 100 > 120 175
P355GH 1.0473 ≤ 120 114 > 120 189
16Mo3 1.5415 ≤ 120 205 +) > 120 280 +)
18MnMo4-5 *) 1.5414 ≤ 120 299 +) > 120 374 +)
13CrMo4-5 *) 1.7335 ≤ 120 296 +) > 120 371 +)
13CrMoSi5-5 **) 1.7336 ≤ 120 344 +) > 120 419 +)
10CrMo9-10 **) 1.7380 ≤ 120 570 +) > 120 645 +)
12CrMo9-10 1.7375 ≤ 120 691 +) > 120 766 +)
13CrMoV9-10 1.7703 ≤ 80 on request > 80 on request
12CrMoV12-10 1.7767 ≤ 80 on request > 80 on request
15NiCuMoNb5-6-4 *)
DIWA 373 brand
20MnMoNi4-5
1.6368 ≤ 120 444 +)
DIWA 393 brand 1.6311 ≤ 120 573 +)
> 120 519 +)
> 120 648 +)
*) When thicknesses > 150 mm are delivered in quenched and tempered condition as per standards,
upcharges apply according to item 11 – Heat treatment
**) When thicknesses > 100 mm are delivered in quenched and tempered condition as per standards,
upcharges apply according to item 11 – Heat treatment
Testing included:
One tensile test and one notched-bar impact test on each rolled plate Certification: 3.1
If a hot tensile test is necessary, charging according to point 9
Heavy plate steel price list GTS Industries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 1 Page 2.8

2.3.3 High-temperature steel made to DH specification
Steel name Steel number Dimension range 1
Thickness in mm
Dimension range 2
Thickness in mm
DIWA 353 1.8807 ≤ 120 414 +) > 120 489 +)
Testing included: One tensile test and one notched-bar impact test
on each rolled plate as well as one hot tensile test on each melt Certification: 3.1
2.3.4 Fine-grained structural steels for pressure vessels made to EN 10028-3
Steel name
Standard range
Steel number Dimension range 1
Thickness in mm
Dimension range 2
Thickness in mm
P355N 1.0562 ≤ 120 100 > 120 175
High-temperature range
P275NH 1.0487 ≤ 120 85 > 120 160
P355NH 1.0565 ≤ 120 110 > 120 185
P460NH 1.8935 ≤ 120 220 +) > 120 295 +)
Low-temperature range
P275NL1 1.0488 ≤ 120 91 > 120 166
P355NL1 1.0566 ≤ 120 116 > 120 191
P460NL1 1.8915 ≤ 110 226 +) > 110 301 +)
Special low-temperature range
P275NL2 1.1104 ≤ 120 101 > 120 176
P355NL2 1.1106 ≤ 120 126 > 120 201
P460NL2 1.8918 ≤ 100 236 +) > 100 311 +)
Testing included:
One tensile test and notched-bar impact test on each rolled plate
Range NH: If a hot tensile test is necessary, charging according to point 9 Certification: 3.1
Heavy plate steel price list GTS Industries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 1 Page 2.9

2.3.5 Non-European standard fine-grain structural steels for pressure vessels made to VdTÜV
Steel name Steel number Dimension range 1
Thickness in mm
Standard range
Dimension range 2
Thickness in mm
StE255 1.0461 ≤ 120 67 > 120 142
StE315 1.0505 ≤ 120 79 > 120 154
StE380 1.8900 ≤ 120 114 +) > 120 189 +)
StE420 1.8902 ≤ 120 154 +) > 120 229 +)
High-temperature range
WStE255 1.0462 ≤ 120 83 > 120 158
WStE315 1.0506 ≤ 120 95 > 120 170
WStE380 1.8930 ≤ 120 130 +) > 120 205 +)
WStE420 1.8932 ≤ 120 170 +) > 120 245 +)
Low-temperature range
TStE255 1.0463 ≤ 120 84 > 120 159
TStE315 1.0508 ≤ 120 97 > 120 172
TStE380 1.8910 ≤ 110 132 +) > 110 207 +)
TStE420 1.8912 ≤ 110 172 +) > 110 247 +)
Special low-temperature range
EStE255 1.1103 ≤ 120 99 > 120 174
EStE315 1.1105 ≤ 120 111 > 120 186
EStE380 1.8911 ≤ 100 146 +) > 100 221 +)
EStE420 1.8913 ≤ 100 186 +) > 100 261 +)
Testing included: One tensile test and one notched-bar impact test on each rolled plate;
for high-temperature grades one hot tensile test per melt is also performed Certification: 3.1/3.2
Heavy plate steel price list GTS Industries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 1 Page 2.10

3.3 Plate weight
Plate weight t
> 21 ≤ 25 56
> 25 ≤ 30 71
> 30 ≤ 36 122
> 36 ≤ 40 247
> 40 273
3.4 Flatness / Leveling
- Standard flatness according to EN 10029, Tab. 4 no charge
- Special flatness according to EN 10029, Tab. 5
Invoice of the following minimum upcharges
Thickness
mm
Width
mm
≤ 3200
6 < 8 30
> 3200 ≤ 4000
8 ≤ 10 20 46
> 4000 ≤ 4500
> 10 ≤ 20 20 46 51
> 20 ≤ 80 25 46
> 80 ≤ 200 46 51
Other dimensional combinations on request
Upcharge for plates with minimum tensile yield point
> 460 N/mm 2 (relative to the lowest thickness range)
and/or quenched or tempered steels
additional charge
15
Heavy plate steel price list GTS Industries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 1 Page 3.2

All prices in EURO per 1000 kg (EUR per ton)
7 Alloying upcharges/discounts
Scrap-price upcharges/discounts
7.1 Alloying upcharges/discounts
Surcharges valid for deliveries from January 1 st 2011
2.1.2 - 2.1.4 Fine-grain structural steel for steel
construction
Steel number
S420N 1.8902 80
S460N 1.8901 118
S420NL 1.8912 80
S460NL 1.8903 118
S420M 1.8825 80
S460M 1.8827 118
S420ML 1.8836 80
S460ML 1.8838 118
DI-MC460B 1.8827 118
DI-MC460T 1.8838 118
DI-MC550 118
2.1.5 Weathering-resistant (“patinable”) steels
S235J2W, S235J2W +N
DIWETEN 235
1.8961, 1.8961 +N 106
S355J2W, S355J2W +N 1.8965, 1.8965 +N 160
S355K2W, S355K2W +N
DIWETEN 355
1.8967, 1.8967 +N 160
2.1.6 – 2.1.7 High-strength fine-grained structural steels
S460QL 1.8906 146
S500QL DILLIMAX 500 T 1.8909 146
S550QL DILLIMAX 550 T 1.8926 158
S620QL 1.8927 158
S690QL DILLIMAX 690 T 1.8928 158
S890QL DILLIMAX 890 T 1.8983 390
S960QL DILLIMAX 965 T 1.8933 390
S460QL1 1.8916 146
S500QL1 DILLIMAX 500 E 1.8984 146
S550QL1 DILLIMAX 550 E 1.8986 158
S620QL1 1.8987 158
S690QL1 DILLIMAX 690 E 1.8988 158
S890QL1 DILLIMAX 890 E 1.8925 390
DILLIMAX 1100 1.8942 484
Heavy plate steel price list GTS Industries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 12 Page 7.1

2.3.2 - 2.3.3 Alloyed high-temperature steels Steel number
16Mo3 1.5415 78
18MnMo4-5 1.5414 138
13CrMo4-5 1.7335 147
13CrMoSi5-5 1.7336 166
10CrMo9-10 1.7380 302
12CrMo9-10 1.7375 302
13CrMoV9-10 1.7703 334
12CrMoV12-10 1.7767 342
15NiCuMoNb5-6-4 DIWA 373 1.6368 315
20MnMoNi4-5 DIWA 393 1.6311 251
DIWA 353 1.8807 234
2.3.4 - 2.3.5 Fine-grain structural steels for pressure vessels
P460NH 1.8935 118
P460NL1 1.8915 118
P460NL2 1.8918 118
StE380 1.8900 43
StE420 1.8902 80
WStE380 1.8930 43
WStE420 1.8932 80
TStE380 1.8910 43
TStE420 1.8912 80
EStE380 1.8911 43
EStE420 1.8913 80
2.3.6 Fine-grain structural steels for tank cars/tank containers
DILLINAL 460/630 N 1.8905 118
DILLINAL 460/630 NL 1.8915 118
P400NGJ2 80
P400NGJ4 80
P440NJ4 118
P460NJ2 118
2.3.7 Low-temperature steels
11MnNi5-3 / DT29 1.6212 107
13MnNi6-3 / DT36 1.6217 113
12Ni14 1.5637 660
X12Ni5 (12Ni19) 1.5680 942
X8Ni9+NT640 1.5662 + NT640 1757
X8Ni9+QT640 1.5662 + QT640 1757
X8Ni9+QT680 1.5662 + QT680 1757
X7Ni9 1.5663 1753
Heavy plate steel price list GTSIndustries SA
Dillinger Hüttenwerke AG 01.01.2011 Revision 12 Page 7.2

2.3.9 Pressure vessel steels made to ASTM standards Steel number
A 387-11 Class 2 166
A 387-12 Class 2 156
A 387-22 Class 2 302
2.4.2 Alloyed steels for quenching and tempering
25CrMo4 1.7218 79
34CrMo4 1.7220 79
42CrMo4 1.7225 79
50CrMo4 1.7228 79
51CrV4 1.8159 38
2.4.3 Alloyed case-hardened steels
16MnCr5 1.7131 18
20MnCr5 1.7147 21
2.6.2 Air-hardened wear-resistant steels
DILLIDUR 250 L 1.8702 16
DILLIDUR 325 L 1.8705 207
2.6.3 Water-hardened wear-resistant steels
DILLIDUR 400 V 1.8715 158
DILLIDUR 450 V 1.8720 158
DILLIDUR 500 V 1.8721 158
2.7.4 Pressure-vessel steels
13CrMo4-5 / A(SA)387-12-2 156
7.2 Scrap-price upcharges/discounts
Surcharge valid for deliveries from January 1 st 2011
2.3.2 - 2.3.3 Alloyed high-temperature steels
16Mo3 1.5415
18MnMo4-5 1.5414
13CrMo4-5 1.7335
13CrMoSi5-5 1.7336
10CrMo9-10 1.7380
12CrMo9-10 1.7375
13CrMoV9-10 1.7703
12CrMoV12-10 1.7767
15NiCuMoNb5-6-4 DIWA 373 1.6368
20MnMoNi4-5 DIWA 393 1.6311
DIWA 353 1.8807
Heavy plate steel price list GTS Industries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 12 Page 7.3
192

for inspections by Bureau Veritas (BV)
Steel grade A, B, AH 6.60
with additional Z samples 9.90
Steel grade D, DH 7.70
with additional Z samples 11.55
Steel grade E, EH 11.00
with additional Z samples 16.50
Minimum amount per order EUR 82.50
for inspections by Det Norske Veritas (DNV)
Steel grade A, B 7.02
D 9.72
A 32, A 36, A 40, D 32, D 36, D 40, E 10.80
E 32, E 36, E 40 11.88
for inspections by Lloyd's Register EMEA (LR)
Steel grade A - D 8.65
AH27 – DH40 10.11
EH27 – EH40 14.16
FH27 – FH69 15,50
Minimum amount per order EUR 197.00
In case of modification of the inspection costs shown above, the charges valid on the date of delivery will apply.
Where the customer specifies inspection of other steel grades or inspection by one or more other inspection
companies, we will apply for testing by the inspection companies on the customer’s behalf (or on behalf of the customer’s
customer, as the case may be). The personal inspection fees will be charged by the inspection companies to the customer
(or the customer’s customer) and are to be paid directly to the inspection company.
The customer must ensure that we are authorized to commission the inspection company selected by the customer on
behalf and at the expense of the customer’s customer. If not otherwise agreed, this authorization is considered granted
when an inspection company is selected in the customer’s order.
Heavy plate steel price list GTSIndustries SA
Dillinger Hüttenwerke AG 01.01.2011 Revision 4 Page 12.2

All prices in EURO per 1000 kg (EUR/t)
16 Freight charges for carriage-paid delivery French market
The freight charges will be charged at the rates and under the
conditions applicable on the day of delivery.
16.1 Freight charges, shipment by rail
Destination
Minimum tonnage
For calculation of charge
Zuschlag
€/t
Bantzenheim 45,0 27,00
Chalôn sûr Saone 55,0 34,00
Chateauneuf-sur-Loire 45,0 24,00
Creusot (Le) 45,0 33,00
Dunkerque 47,5 9,00
Fos 45,0 45,00
Kuntzig 45,0 15,50
Lorient 45,0 53,00
St. Nazaire 45,0 43,00
Preisliste Grobblech GTSIndustries SA
AG der Dillinger Hüttenwerke 01.01.2011 Revision 2 Seite 16.1