Miki Pulley products - DKSH

Back to TopRotation Transmission ProductsOverload protection,equipment protects machinery by disconnecting input and output duringoverloading instantaneously. It detects an overload reliably and disconnects inputand output by detaching the drive key from the groove. When an overload isremoved, they are connected automatically with the same torque and indexingposition set previously. Torque is set by the built-in torque spring. No fine controlis required. It can be also used with both two-shaft butting and wrapping as aflexible coupling. Drive key power transmission allows use in oil.TT-01 TypeIt detects an overload reliably and disconnects input and output by detaching thedrive key from the groove. When an overload is removed, they are connectedautomatically with the same torque and indexing position set previously. Torque isset by the built-in torque spring. No fine control is required. The TT-01 type can beused with both two-shaft butting and wrapping as a flexible coupling.Set torque value:Maximum rotation speed:0.2Nm to 200Nm1800min-1 (Depending on the size)TT-03 TypeIt detects an overload reliably and disconnects input and output by detaching thedrive key from the groove. When an overload is removed, they are connectedautomatically with the same torque and indexing position set previously. Torque isset by the built-in torque spring. No fine control is required. The TT-03 type is usedfor wrapping by inserting a shaft into a hub to set a pulley or gear.Set torque value:Maximum rotation speed:0.2Nm to 200Nm1800min-1 (Depending on the size)CatalogueLinkCAD DataLinkCatalogueLinkCAD DataLinkPage 4© DKSH