11.07.2015 Views

Miki Pulley products - DKSH

Miki Pulley products - DKSH

Miki Pulley products - DKSH

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Back to TopSpeed Control ProductsDC MotorsIt is the "Static Leonard method" non-stage speed change motor that combines aseparately-excited motor appropriate to variable speed with the SCR controldevice controllable by a weak electric signal of a few mA. The speed can bechanged from high to low infinitely at stable rotations. It has an excellent controlresponsiveness and high rotational accuracy (+/-2%) , and the operation isincredibly simple.SC SeriesCommercial AC 100V or 200V power supply can be used regardless of 50/60Hz,and the optional speed can be selected by the speed setter on the control panel.The speed can be changed infinitely at stable rotation throughout a rage from highspeed of the rated speed 2500min-1 (1750min-1 for the rated output 1.5kW andabove) to low speed of 1/30. There are wide variations such as SCW model withworm reducer or SCG model with base-type coaxial reducer except the SCDmodel of stand-alone motor. Also, the high-performance SC series are capable offeedback control by mounting a tachometer generator to the motor.SY SeriesCommercial AC 100V or 200V power supply can be used regardless of 50/60Hz,and the optional speed can be selected by the speed setter on the control panel.The speed can be changed infinitely at stable rotation throughout a rage from highspeed of the rated speed 2500min-1 to low speed of 1/20. There are widevariations such as SYW model with worm reducer or SYG model with base-typecoaxial reducer except the SYD model of stand-alone motor. The SY series arethe cut-down version with the features limited to speed controls.CatalogueLinkCAD DataLinkCatalogueLinkCAD DataLinkPage 8© <strong>DKSH</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!