Miki Pulley products - DKSH

Back to TopPositioning Control ProductsControllersIntroduction of control systems is gaining for automated machinery in variousfields. Especially, position control systems are used for all kinds of automatedmachinery. We offer various controllers suitable for fixed position-to-positioncontrol, synchronous (follow-up) control and biaxial interpolation control. Also, acontroller that controls a powder brake voltage to obtain a stable tension controlis available. Troublesome task in the process of system construction is reducedby our easy-to-operate controllers with advanced controls.Servo pulse ControllerA servo pulse controller is used to control the operation when using a servo orstepping motor for the drive member. Miki Pulley's controllers are designed forperformance improvement according to application. Any actuator compatible withpulse input is connectable. The SPC-007 model for roll feed control, SPC-PULCON for X-Y control and SPC-SYNCHRO for synchronous (follow-up) controlare available.CatalogueLinkCAD DataLinkControl shaft numbers: 1 to 2 shaftsTension controllerWhen rolling up a film, fabric or thread, the diameter differs between beginning andend of take-up, and the tension added to the material constantly varies. If stretchmaterial is not taken up with constant tension, it leads to a product failure. Atension controller changes the torque on the take-up side to control the tension tobe constant regardless of diameter. As a control method, there are a "close droopmethod" that detects an actual tension by a tension sensor to control torque and"open loop method" that detects integrated thickness to control torque by the resultof calculation.CatalogueLinkCAD DataLinkPage 6© DKSH