UPP Semi-Rigid Pipework Systems Ordering Guide - Franklin ...

UPP Semi-Rigid PipeworkSystems Ordering Guide

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsAdvantages• Co-axial sleeve pipe co-extrudedover UPP Extra lined primary pipe.• Uninterrupted interstitial spacebetween the primary and secondarypipe.• Leak detection system available.• Full range of secondary containmentfittings.UPP Secondary Contained PipeworkWhere legislation requires, a further level of protection can be provided by using UPPsecondary containment pipework. Secondary containment of the primary pipework isachieved using an outer pipe and the electrofusion process to make joints; providing a secondbarrier, also with no joints or leak paths.Secondary pipe is terminated or closed onto the primary pipe using terminating reducers andthis is completed at each end of a pipe run before making the transition to steel on theprimary pipe work. The electrofusion principles are the same for both primary and secondarysystems.Secondary containment pipework has a 72.5 psi and -8.7 psi vacuum rating which, wheninstalled correctly following the simple installation procedures, is maintained for the fulllifetime of the site. A very high level of safety is achieved from near zero permeation, a burstpressure capability in excess of 290 psi and an operational temperature range of -104°F to+122°F. The interstitial space between primary and secondary pipe can be monitored usingpressure or vacuum leak detection monitoring systems.Technical Services & SupportBill of Materials, certified training, site piping design and layout assistance also play animportant part of providing a complete solution for our customers. Franklin Fueling Systemsowns the tools necessary for the manufacture of the UPP system. Our UL971 and EN14125approved product range is created by our in-house design teams, developed to ourspecification, tested and approved in conjunction with relevant third parties and regularcustomer liaison sessions.5

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsModel04-050-LDescription1 ½" primary plain 45° elbow fittingModel08-050-EIF-UDescription1 ½" single wall electrofusion tee fittingModel08-050-LDescription1 ½" primary plain tee fittingModel09-063-050-LDescription2" x 1 ½" primary plain reducer fittingModel10-050-LDescription1 ½" primary plugModel02-63SC-UDescription1 ½" secondary welding couplerModel49-063-050-U49-063-050TP-UDescription1 ½" secondary electrofusion reducer fitting1 ½" secondary electrofusion reducer fitting withtest portModel49-110-063SC-UDescription4" x 1 ½" secondary electrofusion reducer fittingModel81-050NPT-UDescription1 ½" (pipe) x 1 ½" NPT male threadedtermination fittingModel81-063-1NPTUDescription2" (pipe) x 1 ½" NPT male threaded terminationfittingModel92-050 NPT-UDescription1 ½" (pipe) x 1 ½" NPT female threadedtermination fitting7

UPP Semi-Rigid Pipework SystemsModel92-063-1 NPT-UDescription2" (pipe) x 1 ½" NPT female threadedtermination fittingModel92-050 UF NPT-UDescription1 ½" (pipe) x 1 ½" NPT union adaptertermination fittingModelHEX 2Description2" NPT X 1 ½" NPT hex adapterModel303-063-EIF-U304-110-063-TPDescription1 ½" double wall / 2" single wall electrofusionentry boot1 ½" double wall ducted entry boot with ductingtest portModelG3-063-050-UDescriptionSC 1 /2" Gemini 90° ElbowModelG4-063-050-UDescriptionSC 1 1/2" Gemini 45° Elbow OR SC 1 1/2"Gemini Inline JointModelG8-063-050-UDescriptionSC 1 ½" Gemini Tee8

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsUPP 2" Primary Pipework System03-063-EIF-U10-063-L-U001-063-019VFEB-D-075-182-063 NPT-U04-063-EIF-U02-63-U91-063 NPT-U08-063-EIF-U303-063-EIF-U02-063-L-U09-090-063EIF-UModel Description Unit001.063.019V 2" single wall pipe 19' stickModel02-63-UDescription2" primary welding couplerModel02-063-L-UDescription2" primary welding coupler, longModel03-063-EIF-UDescription2" primary electrofusion 90° elbow fittingModel03-063-LDescription2" primary plain 90° elbow fittingModel04-063-EIF-UDescription2" primary electrofusion 45° elbow fittingModel04-063-LDescription2" primary plain 45° elbow fittingModel08-063-EIF-UDescription2" single wall electrofusion tee fittingModel08-063-LDescription2" primary plain tee fitting9

UPP Semi-Rigid Pipework SystemsModel09-090-063-EIF-UDescription3" x 2" primary electrofusion reducer fittingModel09-090-063-L-UDescription3" x 2" primary plain reducer fittingModel09-110-063-L-UDescription4" x 2" primary plain reducer fittingModel08-090-063-UDescription3" x 3" x 2" primary plain reducing teeModel10-063-L-U2" primary plugDescriptionModel91-063 NPT-UDescription2" (pipe) x 2" NPT male threaded terminationfittingModel82-063NPT-U11.50 NPTDescription2" (pipe) x 2" NPT female threaded terminationfitting2" (pipe) x 2" NPT female threaded terminationfitting w/o hexModelDescription90-063 QL 2" (pipe) x 2" quick release termination fittingModel82-063UFNPT-UDescription2" (pipe) x 2" NPT union adapter terminationfittingModel303-063-EIF-UDescription1 1/2" double wall/ 2" single wall electrofusionentry bootModelFEB-D-075-1FBC-N-075FBC-X-075Description2" (pipe) fiberglass entry bootInternal cover for 2" (pipe) fiberglass entry bootExternal cover for 2" (pipe) fiberglass entry boot10

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsUPP 2" Secondary Contained Pipework System49-075-063TPI-U02-063-L-UG3-075-063-U10.75(SC)03-063-EIF-U49-075-063-I-U001.075.063.XXXPS91-063 NPT-U04-063-EIF-UG4-075-063-U81-063 NPT-U02-063-L-UG4-075-063-U02-63-U G8-075-063-U 08-063-EIF-U 303-075-EIF-UModel Description Unit001.075.063.028PS 2" double wall pipe 28' stick001.075.063.033PS 2" double wall pipe 33' stick001.075.063.038PS 2" double wall pipe 38' stick001.075.063.100PS 2" double wall pipe 100' coil001.075.063.165PS 2" double wall pipe 165' coilModel02-063-UDescription2" primary welding couplerModel02-063-L-UDescription2" primary welding coupler, longModel03-063-EIF-UDescription2" primary electrofusion 90° elbow fittingModel04-063-EIF-UDescription2" primary electrofusion 45° elbow fittingModel08-063-EIF-UDescription2" single wall electrofusion tee fitting11

UPP Semi-Rigid Pipework SystemsModel49-075-063-1-U49-075-063TP1-UDescription2" secondary electrofusion reducer fitting2" secondary electrofusion reducer fitting withtest portModel03-050-LDescription4" x 2" secondary electrofusion reducer fittingModel09-110-75SC-UDescription4" x 2" secondary plain reducer fittingModel10.75(SC)Description2" secondary plugModel91-063 NPT-UDescription2" (pipe) x 2" NPT male threaded terminationfittingModel82-063NPT-UDescription2" (pipe) x 2" NPT female threaded terminationfittingModel303-075-EIF-U304-110-075-TPDescription2" double wall electrofusion entry bootentryboot2" double wall ducted entry boot with ductingtest portModelG3-075-063-UDescriptionSC 2" Gemini 90° ElbowModelG4-075-063-UDescriptionSC 2" Gemini 45° Elbow OR SC 2" Gemini InlineElbowModelG8-075-063-UDescriptionSC 2" Gemini Tee12

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsUPP 3" Primary Pipework System03-090-EIF-U10-090-L-U001-090-XXX-V82-090 NPT-U04-090-EIF-U02-90-U81-090 NPT-U08-090-EIF-UModel Description Unit001.090.019V 3" single wall vent pipe 19' stick001.090.038V 3" single wall vent pipe 38' stickModel02-90-UDescription3" primary welding couplerModel03-090-EIF-UDescription3" primary electrofusion 90° elbow fittingModel03-090-LDescription3" primary plain 90° elbow fittingModel04-090-EIF-UDescription3" primary electrofusion 45° elbow fittingModel04-090-LS-4-UDescription3" primary plain elbow 45° fittingModel08-090-EIF-UDescription3" single wall electrofusion tee fittingModel08-090-LDescription3" primary plain tee fitting13

UPP Semi-Rigid Pipework SystemsModel09-110-090EIF-UDescription4" x 3" primary electrofusion reducer fittingModel10-090-L-U3" primary plugDescriptionModel03-090-LS-4-UDescription3" lined primary 90° elbow fittingModel04-090-LS-4-UDescription3" lined primary 45° elbow fittingModel08.90.L-IDescription3" primary tee fittingModel81-090NPT-UDescription3" (pipe) x 3" NPT male threaded terminationfittingModel82-090NPT-UDescription3" (pipe) x 3" NPT female threaded terminationfittingModelDescription80.090 QL 3" (pipe) x 3" quick release termination fittingModel304-110-90-UDescription3" electrofusion entry bootModelFEB-D-110-1FBC-N-110FBC-X-110Description3" (pipe) fiberglass entry bootInternal cover for 3" (pipe) fiberglass entry bootExternal cover for 3" (pipe) fiberglass entry boot14

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsUPP 3" Secondary Contained Pipework SystemG3-110-090-U03-090-EIF-U10-090-L-U49-110-090-U001.110.090.XXXPS82-090 NPT-U04-090-EIF-UG4-110-090-U81-090 NPT-UG4-110-090-U02-90-UG8-110-090-U08-090-EIF-U304-110-090TP-UModel Description Unit001.110.090.019PS 3" double wall pipe 19' stick001.110.090.038PS 3" double wall pipe 38' stickModel02-90-UDescription3" primary welding couplerModel02-110SC-UDescription3" secondary welding couplerModel03-090-EIF-UDescription3" primary electrofusion 90° elbow fittingModel04-090-EIF-UDescription3" primary electrofusion 45° elbow fittingModel08-090-EIF-UDescription3" single wall electrofusion tee fitting15

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsUPP 4" Secondary Contained Pipework SystemG3-125-110-U305-125-110TP-U10.110(SC)10-110-L03-110-EIF-U49-125-110-U001.125.110.019PS08.110(SC)09.160.110(SC)04-110-EIF-UG4-125-110-U82-110 NPT-U02-125SC-U81-110 NPT-UG4-125-110-UG3-125-110-U02-110-UModel Description Unit001.125.110.019PS 4" double wall pipe 19' stickModel02-110-UDescription4" primary welding couplerModel02-125SC-UDescription4" secondary welding couplerModel03-110-EIF-UDescription4" primary electrofusion 90° elbow fittingModel03-110-LS-4Description4" primary plain 90° elbow fittingModel04-110-EIF-UDescription4" primary electrofusion 45° elbow fittingModel04-110-LS-4-UDescription4" primary plain elbow 45° fitting17

UPP Semi-Rigid Pipework SystemsModel08-110-EIF-UDescription4" single wall electrofusion tee fittingModel10-110-L4" primary plugDescriptionModel03.110(SC)Description4" secondary 90° elbow fittingModel03-110-LS-4-UDescription4" lined primary 90° elbow fittingModel04.110(SC)Description4" secondary 45° elbow fittingModel04-110-LS-4-UDescription4" lined primary 45° elbow fittingModel08.110(SC)Description4" secondary tee fittingModel08-110-L-UDescription4" primary tee fittingModel49-125-110-U49-125-110TP-UDescription5" x 4" secondary electrofusion reducer fitting5" x 4" secondary electrofusion reducer fittingwith test portModel09.160.110(SC)Description6" x 4" secondary plain reducer fittingModel10.110(SC)Description4" secondary plug18

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsModel81-110NPT-UDescription4" (pipe) x 4" NPT male threaded terminationfittingModel82-110NPT-UDescription4" (pipe) x 4" NPT female threaded terminationfittingModel305-125-110-U305-125-110TP-UDescription4" double wall electrofusion entry boot withintegrated termination fitting4" double wall electrofusion entry boot withintegrated termination fitting and test potModelG3-125-110-UDescriptionSC 4" Gemini 90° ElbowModelG4-125-110-UDescriptionSC 4" Gemini 45° Elbow OR SC 4" Gemini InlineJoint19

UPP Semi-Rigid Pipework SystemsUPP 6" Secondary Contained Pipework System03.160(SC)09.200.160(SC)04.160(SC)02-160SC-U08.160(SC)Model02-160SC-UDescription6" secondary welding couplerModel03.160(SC)Description6" secondary 90° elbow fittingModel04.160(SC)Description6" secondary 45° elbow fittingModel08.160(SC)Description6" secondary tee fittingModel09.200.160(SC)Description8" x 6" secondary plain reducer fitting20

PIPING &CONTAINMENTUPP Semi-Rigid Pipework SystemsUPP 4" Duct SystemWith a thick and robust wall, the new duct is equally flexible and can be welded to electrofusion entry seals and other 4”electrofusion fittings. The duct will provide a water tight chase for pipes or electrical cables when fully welded. This productis for use as an electrical duct or gravel guard for fuel pipework.The following in-house testing has been satisfactorily carried out on the duct:• Electrofusion trials.• Cold temperature bending tests at -20.2°F.• Ball impact test at -20.2°F.• Pressure testing at 29 psi for 1 week.• Drop test of coil from 6 feet.Model00-110-050-DUCTDescription4" UPP flexible ducting (165' coil)Model02-110-UDescription4" primary welding couplerModel02-125SC-UDescription4" secondary welding couplerModelDescription10.125(SC) 5" secondary plugModelDescription49-125-110-U 5" x 4" secondary electrofusion reducer fitting49-125-110TP-U5" x 4" secondary electrofusion reducer fittingwith test port21

franklinfueling.com3760 Marsh Rd. • Madison, WI 53718, USATel: +1 607 838 8786 • Fax: +1 608 838 6433Tel: US & Canada 1 800 225 9787 • Tel: Mex 001 800 738 7610FFS-0255 08-12