Illuminescence - Jesco Lighting

monorail • CONNECTORS & STANDOFFSMA-R44' Rail with 2 End CapsMA-R88' Rail with 2 End CapsField cuttable; Hand bendableto min radius of 12"Rated: 300W at 12V;600W at 24VFinish: SNMA-ECEnd CapInserts over cut-end of Railfor a finished lookFinish: SNMA-BTBending ToolMakes smooth consistentbends in Monorail.MA-II-Connector (Conductive)Conductive connector joinstwo sections of Rail to form astraight line configuration.Dims: 1 3/8" L × 3/8" W × 7/8" HFinish: SNMA-FLXFlexible Connector(Conductive)Conductive adjustableconnector joins two sectionsof Rail at variable angles of60° – 180°.Dims: 3 3/8" L × 1/2" W × 7/8" HFinish: SNMA-TT-Connector (Conductive)Conductive connector joinsthree sections of Rail to form a“T” configuration.Dims: 3 1/8"L × 1-5/8"W × 7/8"HFinish: SNMA-XX-Connector (Conductive)Conductive connector joinsfour sections of Rail to form an“X” configuration.Dims: 3 1/8" L × 3" W × 7/8" HFinish: SNMA-CWCeiling to Wall Connector(Conductive)Conductive connector joinstwo sections of Rail from ceilingto wall at a 90° angle.Dims: 2 1/2" L × 3/8" W × 2 1/2" HFinish: SNMA-I-NCI-Connector(Non-Conductive)Non-Conductive connectorjoins two sections of Rail to forma straight-line configuration.Power is isolated.Dims: 1 3/8"L × 3/8"W × 7/8"HFinish: SNMA-FLX-NCFlexible Connector(Non-Conductive)Non-Conductive adjustableconnector joins two sections ofRail at variable angles of 60° -300°. Power is isolated.Dims: 3 3/8" L × 1/2" W × 7/8" HFinish: SNMA-T-NCT-Connector(Non-Conductive)Non-Conductive connectorjoins three sections of Rail toform a “T” configuration. Poweris isolated.Dims: 3 1/8"L × 1 5/8" W × 7/8" HFinish: SNMA-X-NCX-Connector(Non-Conductive)Non-Conductive connectorjoins four sections of Rail to forman “X” configuration. Power isisolated.Dims: 3 1/8"L × 3" W × 7/8" HFinish: SNMA-SC1212' Aircraft Cable SuspensionSuspends Rail up to 12' belowCeiling with Aircraft Cable.Length adjustablewith cable lock. Tools notrequired. Furnished withcanopy. Non-Electrical.Dims: 12' L × 4 5/8" ØFinish: SNMA-FAFixture AdapterProvides connection fromQuick Adapt Spots andPendants to Monorail. OneFixture Adapter required perQuick Adapt Spot or Pendant.Dims: 1 7/8" H × 5/8" ØFinish: SNMA-SS06Sloped Ceiling Rigid StandoffLength 6"Dims: 8" L × 1 ¼" Ø(Non-Electrical)Finish: SNMA-S033" Rigid StandoffDims: 4 1/2" L × 1 ¼" ØMA-S066" Rigid StandoffDims: 7 7/8" L × 1 ¼" ØMA-S1212" Rigid StandoffDims: 13 7/8" L × 1 ¼" ØMA-S2424" Rigid StandoffDims: 26" L × 1 ¼" ØMA-S3636" Rigid StandoffDims: 38" L × 1 ¼" ØMA-S4848" Rigid StandoffDims: 50" L × 1 ¼" Ø(Non-Electrical)Finish: SNMA-ST033" Rigid T-bar Ceiling StandoffDims: 4 1/2" L × 1 1/2" ØMA-ST066" Rigid T-bar Ceiling StandoffDims: 7 7/8" L × 1 1/2" ØMA-ST1212" Rigid T-bar Ceiling StandoffDims: 13 7/8" L × 1 1/2" ØMA-ST2424" Rigid T-bar Ceiling StandoffDims: 26" L × 1 1/2" Ø(Non-Electrical)Finish: SNMA-FE099" Fixture ExtensionDims: 11 ¾" L × 1/2" ØMA-FE1212" Fixture ExtensionDims: 14 ¾" L × 1/2" ØMA-FE1818" Fixture ExtensionDims: 20 ¾" L × 1/2" ØMA-FE2424" Fixture ExtensionDims: 26 ¾" L × 1/2" ØMA-FE3636" Fixture ExtensionDims: 38 ¾" L × 1/2" ØMA-FE4848" Fixture ExtensionDims: 50 ¾" L × 1/2" ØFor use with Quick Adapt Spot toextend the length of the stem.Not adjustable.Finish: SN144 JESCO LIGHTING