Illuminescence - Jesco Lighting

4" APERTURE LINE VOLTAGETRIMS• Open reflector designs and step bafflesprovide highly efficient general lighting,adding value to the appearance of aspace when lights are on or off.• Oval slot openings minimize glare whileproviding up to 35° of aiming.• Adjustable gimbal ring and eyeballoptions fit well in traditional designs orcontemporary interiors.• Scoop wall wash option in whitematches ceiling tiles, and otherstandard white paint finishes. Integratesinto interior designs, yields soft lightingon walls and cabinetry.• A perfect pinhole spotlight effect is idealfor quiet dining or dramatic displayaccenting.RS2000BNew ConstructionNon-IC UniversalDims: 5 ¼" W × 8" L × 5 ½" DHanger Bars: Adj. 14 ½" to 24 ½"Cut-Out: 4 ⅜" ØLamp: PAR16/20 120V50WNon-ICMEDRS2000BaNew ConstructionNon-IC Airtight UniversalDims: 5 ¼" W × 8" L × 5 ½" DHanger Bars: Adj. 14 ½" to 24 ½"Cut-Out: 4 ⅜" ØLamp: PAR16/20 120V50WNon-ICMED• Shower trims provide qualityunobtrusive lighting.Housings• Thermally protected, listed for damplocations.• UL listed for feed-through branch circuitwiring.• Remodeling housing models allow wiringbelow ceiling plane.• J-box accessible through ceiling cut-out.• Non-IC units require 3-inch clearanceson all sides; IC units may be coveredwith insulation to conserve energy.• Airtight models are gasketed to preventairflow through the housing from heatingor cooling systems. Compliant with Stateof Washington restricted airflowrequirements (WSEC code).• 4-inch remodeling and non-IC housingsfit into tight 6-inch joist ceiling spaces.RS2000ICNew ConstructionICDims: 5 ¼" W × 8" L × 6" DHanger Bars: Adj. 14 ½" to 24 ½"Cut-Out: 4 ⅜" ØLamp: PAR16/20 120V50WICMEDRS2000ICANew ConstructionIC AirtightDims: 5 ¼" W × 8" L × 6" DHanger Bars: Adj. 14 ½" to 24 ½"Cut-Out: 4 ⅜" ØLamp: PAR16/20 120V50WICMED• Order AC-E26/GU10 adapter for use withline voltage twist-and-lock MR16 lamps.For proper lamp fit use 4" low voltagetrims.• Dimmable with standard Line Voltageincandescent Dimmers.• Lamps sold separately.AC-E26/GU10MR16 GU10 Socket Adapter forLine Voltage Housings.For 120V, 50W MR16 GU10 LampsUse with 4" Low Volage trimsexept TM 407, TM 411. see p. 157.RS2000RRemodelingNon-ICDims: 4 ⅝" W × 12" L × 5 ½" DCut-Out: 4 ⅜" ØLamp: PAR16/20 120V50WNon-ICMEDRS2000RARemodelingNon-IC AirtightDims: 4 ⅝" W × 12" L × 5 ½" DCut-Out: 4 ⅜" ØLamp: PAR16/20 120V50WNon-ICMEDJESCO LIGHTING161