Download - Trade Garage Equipment

Operating InstructionsGeneral9 General9.1 Transport DamageAll deliveries are to be insured by the customer.We must turn down any possibleclaims concerning transport responsibility.Our responsibility is restricted to the hand -over of the machine in brand-new condition tothe shipping agent. Should you discover anydamage to the machine, do not use it andcontact the shipping agent concerning thedamage.9.2 WarrantyEvery machine is covered by a 12 monthswarranty against material faults and incorrectassembly. The warranty covers all parts thatare returned post free within twelve monthsfor inspection. The parts will then be inspectedby us to determine whether the partswere damaged under normal use.The warranty will be declared void if the partsare found to have been overloaded, handledincorrectly or that replacement parts havebeen assembled incorrectly.9.3 Ordering of spare partsPlease give the following details when ordering;Type:Load:Year of construction:Serial Number:Part description:Order Number:10 EC Declaration of ConfomityConforming to: EC-Directives – Machines98/37/EG, appendix II AWeBLITZ M. SchneiderWerkzeug- u. MaschinenfabrikGmbHHüfinger Straße 55D-78199 Bräunlingendeclare in general responsibility, that theproductPlatform Liftconvered by this declaration confirms to theHealth and Safety rules laid down by the directivesabove.The following Norms were used for the properimplemention of the EC Directives on Healthand Safety:• DIN EN 292 1 / 2 (1994)• DIN EN 294 (1992)• DIN EN 349 (1991)• VBG 14 (1993)• DIN EN 1570 (1998)Bräunlingen, dated 01.03.2002S. Schneider, General ManagementThe address for ordering is to be found on thecover of this operating instructions.102695 06/0213