cpc 41 – epoxy-polyester metallic powder coatings - Helios

TEHNIČNE INFORMACIJETECHNICAL DATA SHEETTECHNISCHE INFORMATIONENTEHNIČKE INFORMACIJEТЕХНИЧЕСКАЯ ИНФОРМАЦИЯCPC 41 – EPOXY-POLYESTER METALLIC POWDER COATINGS1412003Product Description:CPC 41 metallics are powder coatings based on polyester resincured with epoxy resin. They are bonded or dry-blend mix of specialeffect pigments and powder coatings. Bonding prevents separationduring application and recovery process.Applications: metal furniture, machinery parts, tools and equipment, shelves and components, metal toys.Comparison between “ bonded” and “dry-blended “ metallic powdercoating:Bonded:Dry-blended:- no separation at application - separation at application- recoverable - usually problematic recover- pigment agglomerationFeatures:excelent mechanical properties,good levelling properties,good storage stabilityPowder Specification:Shades:Surface appearance:Gloss:Density:Coating equipment:Spreading rate:Shelf Time:different metallix shadessmooth, with effect/textureglossy ,semi-glossy1400-1700 kg/m 3 , depending on colour shadeelectrostatic7-9 m 2 /kg at 70 μm film thickness12 - 18 monthsPackaging: Cardboard box - 20 kg and 2 kgStorage Conditions:In originally closed boxes in dry place at temperature 5-25°CSurface Pretreatment:Aluminium:Zn-plated steel:Iron:yellow or green chromate pretreated,transparent chromate pretreated,zinc phosphate or low-build iron phosphate or high-build iron phosphate.Page 1/2Issue: 02_05/10

TEHNIČNE INFORMACIJETECHNICAL DATA SHEETTECHNISCHE INFORMATIONENTEHNIČKE INFORMACIJEТЕХНИЧЕСКАЯ ИНФОРМАЦИЯCPC 41 – EPOXY-POLYESTER METALLIC POWDER COATINGS1412003Curing:220CPC 41-1, 41-5, 41-7220CPC 41-3Object temeperature200180160Object temeperature2001801601405 10 15 20Minutes1405 10 15 20MinutesTest Results:Physical Properties (0,8 mm stell panel) Glossy Semi glossyCure parameters (object conditions) 10 min / 180°C 20 min / 180°CFilm thickness in m (ISO 2808) 60-70 60-70Adhesion (ISO 2409) Gt0 Gt0Bend Test (ISO 1519) 3 5Elasticity - Cupping Test (DIN ISO 1520) 7-8 4Hardness (Bucholz) (ISO 2815) 91 91Chemical Properies (Panel Granodine 1993 Henkel)Salt spray 500 h (DIN 50021 SS) – Delamination at cut: max. 1 mm max. 1 mmHum. cabinet 500 h (DIN 50017 SK) – Delamination at cut: max. 1 mm max. 1 mmThis technical data and suggestions for use in this technical data sheet are currently correct to the best of knowledge based on laboratory work and practicalexperience but are subject to change without notice. Because application and conditions vary, and are beyond our control, we are not responsible for resultsobtained in using this product, even when used as suggested. The user should conduct tests to determine the suitability of the product for the intended use. Anyliability we may have (including liability for breach of warranty, strict liability in tort, negligence or otherwise) is limited exclusively to replacement of the product orrefund of its price. Under no circumstance are we liable for incidental and consequential damages.The quality system conforms to ISO 9001.Page 2/2Issue: 02_05/10