Eg-TEC I+II

III Diving with Smart TEC1 Terminology / SymbolsThe information on the display of TEC varies depending on the kind of dive and the dive phase.For information about diving with microbubble levels (MB levels) see chapter V->28. Specific features of "Diving with more than one gas mixture", are describedin chapter VI -> 32.1.1 General terminology / Display during no-stop phaseIIIEnglishOxygen toxicityCNS O2%Ascent rate(Only whileascending)Current depthIn metres (feet)%SPEEDDive timeDuration ofthe dive (min)DepthTimeNo-stop phaseDive phase during which surfacing is allowedwithout stop.Decompression phaseDive phase during whichsurfacing is allowed onlyafter decompressionstops are completed.%CNS O2%NO STOPTankpressureO2% MixSelected oxygen fractiontank 1No-stop timeRemaining timeat a given depthduring which ascentis allowed withoutdecompressionstop (min).RBT, Remainingbottom time26.2 mMaximum depth Temperature MB Level…Maximum depth reached during the diveMaximum depth37 min. Dive timeCurrent depthElapsed bottom time24minNo-stop time1.2 Display during decompression phase / Remaining Bottom Time (RBT)Decompression stopAll required decompressionstops must be observed.CNS O2%DepthTimeTotal ascent time to surface (7 min)6 mDecompressionstop duration 2 min3 mDeepestdecompressionstop depthDECO STOP%Decompressionstop depthDeepest stage isdisplayed.Decompressionstop durationPrescribed duration of thedecompression stop at thedisplayed decompressionstage (minutes).35.7 mTotal ascent timeIncluding decompressionstops in minutes.No-stop rangeRBT 21 minDecompression rangeRemaining bottom time, RBTMaximum remaining time at currentdepth including all decompressionobligations (minutes).III UWATEC ® Smart dive computers15