Varian High Energy Clinac Main Circuit Breaker Panel with Battery ...

Varian High Energy Clinac Main Circuit Breaker
Panel with Battery Backup Circuit
Application
The Clinac Main Breaker Panel is a custom panel that serves
as the main power disconnect between the Clinac system and
the facility 240V or 208V power source. The panel provides
emergency disconnection and overcurrent protection, and
will maintain the main breaker undervoltage (UVR) holding
circuit during any loss of power. The (battery backup)
holding circuit is disabled whenever any emergency off
pushbutton is pressed. The standardized design provides a
platform for future upgrades of the system. The panel offers
the customer, specifier, and the installer a number of
advantages by combining a variety of individual components
into a single pre-engineered and factory tested panel. Each
panel is UL and cUL listed for compliance with the
approvals required by NEC Article 100 and Article 110-3.
The main circuit breaker is wired to the Clinac system and
provides immediate shut down of the entire system to
comply with NEC required disconnecting means. The panel
may be surface or semi-flush mounted, and can be utilized
for a variety of applications where low-voltage control of the
main power source is desired.
Varian High Energy Clinacs supported:
2100C (all models), 21EX
2300C (all models), 23EX
iX (all models), Trilogy, Novalis-Tx
SILHOUETTE (all models)
Benefits
• Approved by Varian Engineering
• Minimizes down time by maintaining power to the main
breaker (UVR) holding circuit during continuous power
interruptions of up to three days.
• Main breaker will not trip during power interruption due
to generator testing.
• Developed specifically for use with Varian Systems.
• Reduces installation time and cost by providing a singlepoint
power connection, thus eliminating the need to
mount and wire several individual components.
• Uniform factory design eliminates individual project
engineering costs, and delays of on site fabrication.
• Eliminates the sourcing and delivery delays associated
with obtaining multiple components from a variety of
suppliers.
• UL and cUL listed to conform to local codes,
minimizing potential inspection and acceptance issues.
• Standardized design and testing assures high product
quality and system reliability.
• Single panel provides for a more attractive, colorcoordinated
installation.
MAIN CIRCUIT BREAKER
PANEL
14.625"
Depth 6"
Features
• 65,000 amps Short Circuit Current Rating to meet
rigorous hospital power system requirements.
• Maintains breaker during momentary outages.
• battery backup maintains UVR circuit capability
for at least three days.
• Single panel completely assembled and tested.
• Custom wiring diagram speeds installation.
• UL and cUL listed to conform to NEC.
• Complies with NEC Article 100 Definition of
Approved and Article 110-3 Approved.
• Provides low voltage, 24V dc operation via an
integral control power transformer, with batteries
and charger. Convertible…adapts from 240V ac to
208V ac by changing a jumper, undervoltage
release.
• High interrupting solid-state 65kAIC-240V rated
molded case breaker with adjustable instantaneous
trip.
• Padlocking provisions for OSHA lockout/tagout
included on the panel cover and on the individual
main breaker handle.
• Time delay current limiting fuses provide
protection for the primary of the control power
transformer.
• Isolated neutral lugs.
• Oversized ground lugs for parity sizing of ground
wire.
• Provisions for additional control features for
integration with building automation system,
security system, or remote system shut down
alarm.
• Finger safe fuse blocks for control circuit fuses.
• Rated 70A for Varian 600C or 150A for the 2100,
2300, 21EX, 23EX, iX, Trilogy and Novalis-Tx
models.
• Includes two mushroom Emergency OFF
pushbuttons, stainless steel wall plate and
nameplate, to be wired per Varian requirements.
• Surface or semi-flush mounting.
©Copyright 2009 1 of 3 Product Data Clinac 2100CBB 7-28-2009
24"

Varian High Energy Clinac Main Circuit Breaker
Panel with Battery Backup Circuit
• Custom tailored for Varian Systems.
Physical Specifications
Height: 24 inches (609.6 mm)
Width: 14.625 inches (371.5 mm)
Depth: 6 in. (approx.) (152.4 mm)
Weight: 70 pounds ( 31.75 kg)
Main lug wires #3/0 max.
Mounting: Via keyhole slots: width is 9.5
inches on centers. Height is 22 inches on
centers (see diagram).
4” of enclosure may be recessed in wall
for semi flush installations.
Conduits may enter or exit from top, bottom, or
sides. Preferred location is incoming near top
and outgoing at the bottom. Rear conduits not
possible. Exact location must be field verified.
Specifiers please include GE
Supply contact phone number
(1-800-200-9760) (317-554-3876)
on your drawings to aid hospital
or contractor in purchasing.
Available from GEXPRO
1-800-200-9760, (317-554-3876)
7:30-4:30 PM Central time.
©Copyright 2009 2 of 3 Product Data Clinac 2100CBB 7-28-2009

Varian High Energy Clinac Main Circuit Breaker
Panel with Battery Backup Circuit
Products
All products are suitable for use on 240V or
208V systems and provide for 24V DC control
circuit.
Varian High Energy Clinacs
supported:
2100C (all models), 21EX
2300C (all models), 23EX
iX (all models), Trilogy, Novalis-Tx
SILHOUETTE (all models)
208-240V, 60 Hz, 65,000 amps Short Circuit
Current Rating, Surface or Semi-Flush Mounted
150A Main Breaker Panel, UL and cUL
labeled, includes two remote Emergency OFF
mushroom pushbuttons.
Catalog#: 2100CBB150A
50 Hz, CE units available by
special order.
208V
3PH/60 Hz
3/0 Max
Conductor
3φ4 W
+
Ground
Available from GEXPRO
1-800-200-9760, (317-554-3876)
7:30-4:30 PM Central time.
Specifiers please include GE Supply contact
phone number (1-800-200-9760) (317-554-3876)
on your drawings to aid hospital or contractor in
purchasing.
Auto Restart
Main Circuit
Panel with
Battery Backup
Holding Circuit
Clinac
System
Additional Emergency OFF switches
available as Catalog # VEOSW
Relay junction box panel is also
available for Clinac 2100C as
catalog # VRJB-C3.
Remote Emergency Off
Pushbutton, 2 included with
each order (Catalog # VEOSW)
Wire Emergency OFF switches
per Varian requirements. Use
deep switchbox for each switch.
UL and cUL Labeled
©Copyright 2009 3 of 3 Product Data Clinac 2100CBB 7-28-2009

g OBI Circuit Breaker Panel
Application
The On-Board Imager (OBI) Circuit breaker panel is a custom
panel, which serves as the main power, disconnect between the
x-ray system and the facility 480V power source. The panel
provides emergency shut down and overcurrent protection for
the x-ray system.
The standardized design provides a platform for future
upgrades of the system. The panel offers the customer and the
installer a number of advantages by combining a variety of
individual components into a single pre-engineered and factory
tested panel. Each panel is UL and cUL listed for compliance
with NEC Article 100 and Article 110-3. The main breaker
panel includes a power contactor for connection and control of
the Varian Clinac High Energy Accelerator system, providing
immediate shut down of the OBI system to comply with NEC
required disconnecting means. The panel may be surface or
semi-flush mounted.
Standard Applications
Varian OBI - Systems in conjunction with Varian Clinac High
Energy Accelerators.
Benefits
• Developed specifically for use with Varian Oncology
Systems.
• Reduces installation time and cost by providing a singlepoint
power connection eliminating the need to mount and
wire a number of individual components.
• Standardized design provides for pre-engineered system
modifications such as uninterruptible power supply.
• Uniform factory design eliminates individual project
engineering costs, and delays of on site fabrication.
• Main power contactor is coordinated to interface with
system emergency off.
• UL and cUL listed to conform to local codes minimizing
inspection and acceptance issues.
• Standardized design and testing assures high product
quality and system reliability.
• Single panel provides for a more attractive, color
coordinated installation.
Features
• Single panel completely assembled and tested.
• Custom wiring diagram speeds installation.
• UL and cUL listed to conform to NEC.
• Complies with NEC Article 100 Definition of Approved
and Article 110-3 Approved.
• Provides low voltage, 120V controlled contactor
operation.
• High interrupting 25,000 amperes short circuit current
rated or optional 42,000 amperes short circuit current
rated to comply with available short circuit current of your
installation.
• Uses solid state GE Spectra molded case breakers with
adjustable instantaneous trip.
• Padlocking provisions for OSHA lockout/tag out included
on individual main breaker handle.
• Cover may be locked closed with door and hasp or
customer provided padlock.
• ¼ turn slotted door latch provides additional security.
• Isolated neutral lugs.
• Oversized ground lugs for parity sizing of ground wire.
• Ground bus bar for control circuit ground wires.
• All devices selected for high reliability and long life.
• Finger safe terminal blocks for control circuit connections.
• Surface or semi-flush mounting.
• Custom tailored for Varian X-ray Systems with Clinac
High Energy Accelerator.
©Copyright 1 of 3 Product Data OBI60A480V 7/29/2009

g OBI Circuit Breaker Panel
OBI CIRCUIT BREAKER PANEL
14.6"
DEPTH 6"
480V
50/60 Hz
24"
OBI
CIRCUIT
BREAKER
120VAC
OBI
SYSTEM
SYSTEM
EMERGENCY OFF
CONTROL CIRCUIT
Physical Specifications
Height: 24 inches (609.6 mm)
Width: 14.6 inches (370.8 mm)
Depth: 6 inches (approx.) (152.4 mm)
Weight: 46 pounds (21 kg)
Main lug wire 3/0 max.
Mounting: Via keyhole slots: width is 9.5 inches on centers.
Height is 22 inches on centers (see diagram).
©Copyright 2 of 3 Product Data OBI60A480V 7/29/2009

g OBI Circuit Breaker Panel
Conduits may enter or exit from top,
bottom, sides or rear. Exact location
must be field verified.
4” of enclosure may be recessed in
wall for semi flush installations.
Products
All products have provisions
for 120V, 50/60 Hz control.
OBI60A480V, 60 Ampere,
25,000A short circuit current
rating, 480V, 50/60 Hz, UL,
cUL labeled, Surface or Semi-
Flush mounted Panel.
OBI60A480V42KAIC, 60
Ampere, with optional
42,000A short circuit current
rating, 480V, 50/60 Hz, UL,
cUL labeled, Surface or Semi-
Flush mounted Panel.
Available from GEXPRO
National Service Center,
Indianapolis, IN, Central time
zone, 1-800-200-9760, X3876
or 317-554-3876.
©Copyright 3 of 3 Product Data OBI60A480V 7/29/2009

VRJB-C3 Relay Junction Box
for Varian Medical Systems
Applications
The VRJB-C3 Relay Junction Box provides an interface with the Varian
Clinac via a factory assembled and tested control panel designed to provide
a convenient, organized, labor saving central connection point for the Laser
positioning system status warning lights, room lighting, and door interlocks
and remote emergency off pushbuttons. The panel includes wiring diagrams
to enable it to be used as a radial junction and control point simplifying the
connection of the various systems. Multiple terminals are dedicated for
connecting these devices. The Relay Junction box has a Short Circuit
Current Rating of 5,000 amperes @ 120 volts AC. The panel is UL and cUL
listed and is in compliance with the NEC articles 100 and 100.3. The Relay
Junction Box is designed for wall mounting.
Designed for use with the following Varian Medical Systems:
• 2100C/D • 21EX • Novalis Tx • iX
• 2300C/D • 23EX • Trilogy
• Silhouette Edition Clinac
Features Benefits
• Dedicated terminals and multiple ground terminal
bars are clearly marked with Varian drawing
reference numbers.
• All circuits may be connected directly to dedicated terminals,
eliminating the need for additional junction boxes or multiple
splices, saving installation time and labor.
• Approved by Varian Medical Systems’ Engineering. • A single pre-engineered panel with a permanent wiring diagram.
• Connectorized Interface Cables • Allows for verifying all of the lighting and interlock circuits
prior to connection to the Varian equipment.
• Surge suppression installed for each relay coil. • Provides protection for the sensitive electronic equipment.
All input and output signals are protected with fuses
and transient voltage suppressors.
• Isolated contacts accommodate different lighting
circuit voltages.
• Easy mounting wall mounted enclosure utilizing
(4) holes for ¼” mounting screws.
Hinged door provides easy access.
• Spare relay contacts are available for specialized applications.
• Saves installation time and labor.
Two combination ½” or ¾” combination knockouts,
located on the left side.
• Off white exterior paint finish.
• All components selected for high reliability and long life.
• Provides a standardized platform for future applications or upgrading.
• UL and cUL listed.
• Factory assembled and tested.
• Available from Stock!

VRJB-C3 Relay Junction Box
for Varian Medical Systems
VARIAN RELAY
JUNCTION BOX
VRJB-C3

CUSTOMER POWER IN
120VAC-NA, 220VAC-EUROPE (600VAC, MAX)
20 AMPS MAX
GND NEUTRAL LINE
CUSTOMER POWER IN
120VAC or 277VAC-NA, 220VAC-EUROPE (600VAC MAX)
20 AMPS MAX
GND NEUTRAL LINE
ROOM LIGHTS
(20 AMPS MAX LOAD)
REMOTE EMERGENCY OFF SWITCH(S)
[VARIAN SUPPLIED +24VDC]
DC DOOR INTERLOCK SWITCH(S)
[VARIAN SUPPLIED -12VDC OR +24VDC]
NEUTRON/OPTIONAL CUSTOMER DOOR
INTERLOCK SWITCH(S)
[VARIAN SUPPLIED -12VDC]
AC DOOR INTERLOCK SWITCH(S)
[VARIAN SUPPLIED 120VAC]
CUSTOMER POWER IN
120VAC-NA, 220VAC-EUROPE, 20 AMPS MAX
GND NEUTRAL LINE
BEAM OFF LIGHT
(120VAC-NA, 220VAC-EUROPE)
5 AMPS MAX LOAD)
BEAM ON LIGHT
(120VAC-NA, 220VAC-EUROPE)
5 AMPS MAX LOAD)
BEAM READY LIGHT
(120VAC-NA, 220VAC-EUROPE)
5 AMPS MAX LOAD)
GENERATOR ON LIGHT
(120VAC-NA, 220VAC-EUROPE)
5 AMPS MAX LOAD
X-RAY ON LIGHT
(120VAC-NA, 220VAC-EUROPE)
5 AMPS MAX LOAD
VRJB-C3 Relay Junction Box
for Varian Medical Systems
CUSTOMER
SUPPLIED
VARIAN
SUPPLIED
K1
K2
K3
K4
K5
K6
K7
K1 (24VDC)
K2 (24VDC)
K3 (120VAC)
K4 (120VAC)
K5 (120VAC)
K6 (24VDC)
K7 (24VDC)
Ordering Information:
Catalog number: “Varian VRJB-C3”
Available from GEXPRO, Indianapolis, Indiana
1-800-200-9760, ext 3876
or 1-317-554-3876
INTERFACE CONNECTORS