Varian High Energy Clinac Main Circuit Breaker Panel with Battery ...

More documents

Recommendations

Info

g OBI Circuit Breaker Panel Conduits may enter or exit from top, bottom, sides or rear. Exact location must be field verified. 4” of enclosure may be recessed in wall for semi flush installations. Products All products have provisions for 120V, 50/60 Hz control. OBI60A480V, 60 Ampere, 25,000A short circuit current rating, 480V, 50/60 Hz, UL, cUL labeled, Surface or Semi- Flush mounted Panel. OBI60A480V42KAIC, 60 Ampere, with optional 42,000A short circuit current rating, 480V, 50/60 Hz, UL, cUL labeled, Surface or Semi- Flush mounted Panel. Available from GEXPRO National Service Center, Indianapolis, IN, Central time zone, 1-800-200-9760, X3876 or 317-554-3876. ©Copyright 3 of 3 Product Data OBI60A480V 7/29/2009
VRJB-C3 Relay Junction Box for Varian Medical Systems Applications The VRJB-C3 Relay Junction Box provides an interface with the Varian Clinac via a factory assembled and tested control panel designed to provide a convenient, organized, labor saving central connection point for the Laser positioning system status warning lights, room lighting, and door interlocks and remote emergency off pushbuttons. The panel includes wiring diagrams to enable it to be used as a radial junction and control point simplifying the connection of the various systems. Multiple terminals are dedicated for connecting these devices. The Relay Junction box has a Short Circuit Current Rating of 5,000 amperes @ 120 volts AC. The panel is UL and cUL listed and is in compliance with the NEC articles 100 and 100.3. The Relay Junction Box is designed for wall mounting. Designed for use with the following Varian Medical Systems: • 2100C/D • 21EX • Novalis Tx • iX • 2300C/D • 23EX • Trilogy • Silhouette Edition Clinac Features Benefits • Dedicated terminals and multiple ground terminal bars are clearly marked with Varian drawing reference numbers. • All circuits may be connected directly to dedicated terminals, eliminating the need for additional junction boxes or multiple splices, saving installation time and labor. • Approved by Varian Medical Systems’ Engineering. • A single pre-engineered panel with a permanent wiring diagram. • Connectorized Interface Cables • Allows for verifying all of the lighting and interlock circuits prior to connection to the Varian equipment. • Surge suppression installed for each relay coil. • Provides protection for the sensitive electronic equipment. All input and output signals are protected with fuses and transient voltage suppressors. • Isolated contacts accommodate different lighting circuit voltages. • Easy mounting wall mounted enclosure utilizing (4) holes for ¼” mounting screws. Hinged door provides easy access. • Spare relay contacts are available for specialized applications. • Saves installation time and labor. Two combination ½” or ¾” combination knockouts, located on the left side. • Off white exterior paint finish. • All components selected for high reliability and long life. • Provides a standardized platform for future applications or upgrading. • UL and cUL listed. • Factory assembled and tested. • Available from Stock!
Page 1 and 2: Varian High Energy Clinac Main Circ
Page 3 and 4: Varian High Energy Clinac Main Circ
Page 5: g OBI Circuit Breaker Panel OBI CIR
Page 9: CUSTOMER POWER IN 120VAC-NA, 220VAC

Varian High Energy Clinac Main Circuit Breaker Panel with Battery ...

Create successful ePaper yourself

Delete template?

Save as template?