Varian High Energy Clinac Main Circuit Breaker Panel with Battery ...

VRJB-C3 Relay Junction Box
for Varian Medical Systems
Applications
The VRJB-C3 Relay Junction Box provides an interface with the Varian
Clinac via a factory assembled and tested control panel designed to provide
a convenient, organized, labor saving central connection point for the Laser
positioning system status warning lights, room lighting, and door interlocks
and remote emergency off pushbuttons. The panel includes wiring diagrams
to enable it to be used as a radial junction and control point simplifying the
connection of the various systems. Multiple terminals are dedicated for
connecting these devices. The Relay Junction box has a Short Circuit
Current Rating of 5,000 amperes @ 120 volts AC. The panel is UL and cUL
listed and is in compliance with the NEC articles 100 and 100.3. The Relay
Junction Box is designed for wall mounting.
Designed for use with the following Varian Medical Systems:
• 2100C/D • 21EX • Novalis Tx • iX
• 2300C/D • 23EX • Trilogy
• Silhouette Edition Clinac
Features Benefits
• Dedicated terminals and multiple ground terminal
bars are clearly marked with Varian drawing
reference numbers.
• All circuits may be connected directly to dedicated terminals,
eliminating the need for additional junction boxes or multiple
splices, saving installation time and labor.
• Approved by Varian Medical Systems’ Engineering. • A single pre-engineered panel with a permanent wiring diagram.
• Connectorized Interface Cables • Allows for verifying all of the lighting and interlock circuits
prior to connection to the Varian equipment.
• Surge suppression installed for each relay coil. • Provides protection for the sensitive electronic equipment.
All input and output signals are protected with fuses
and transient voltage suppressors.
• Isolated contacts accommodate different lighting
circuit voltages.
• Easy mounting wall mounted enclosure utilizing
(4) holes for ¼” mounting screws.
Hinged door provides easy access.
• Spare relay contacts are available for specialized applications.
• Saves installation time and labor.
Two combination ½” or ¾” combination knockouts,
located on the left side.
• Off white exterior paint finish.
• All components selected for high reliability and long life.
• Provides a standardized platform for future applications or upgrading.
• UL and cUL listed.
• Factory assembled and tested.
• Available from Stock!