12.07.2015 Views

RoHS compliant 1310 nm Single-mode Transceiver (S1.1) Small ...

RoHS compliant 1310 nm Single-mode Transceiver (S1.1) Small ...

RoHS compliant 1310 nm Single-mode Transceiver (S1.1) Small ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetFeatures• <strong>RoHS</strong> <strong>compliant</strong>• Compliant with SONET/SDH standard• Compliant with Fast Ethernet standard• Compliant with SFF8472 diagnostic monitoringinterface• Industry standard small form pluggable (SFP)package• Duplex LC connector• Differential LVPECL inputs and outputs• <strong>Single</strong> power supply 3.3V• TTL signal detect indicator• Hot Pluggable• Class 1 laser product complies with EN 60825-1Ordering InformationPART NUMBER INPUT/OUTPUT SIGNAL DETECT VOLTAGE TEMPERATURELS38-A3S-TC-N-DD AC/AC TTL 3.3V 0 ° C to 70 ° CLS38-A3S-TI-N-DD AC/AC TTL 3.3V -40 ° C to 85 ° CDiagnosticsParameter Range Accuracy Unit CalibrationTemperature -40 to 95 ± 3Voltage 0 to VCC ± 0.1 VBias Current 0 to 120 ± 5 mAExternalTX Power -18 to -5 ± 3 dB dBmRX Power -32 to –8 ± 3 dB dBmo CPage 1 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetAbsolute Maximum RatingsPARAMETER SYMBOL MIN MAX UNITS NOTEStorage Temperature T S −40 85 ° CSupply Voltage Vcc −0.5 4.0 VInput Voltage V IN −0.5 Vcc VOutput Current I o --- 50 mAOperating Current I OP --- 400 mARecommended Operating ConditionsPARAMETER SYMBOL MIN MAX UNITS NOTECase Operating TemperatureT C0 70°LS38-A3S-TC-N-DD-40 85CLS38-A3S-TI-N-DDSupply Voltage Vcc 3.1 3.5 VSupply Current I TX + I RX --- 300 mATransmitter Electro-optical CharacteristicsVcc = 3.1 V to 3.5 V, T C = 0 ° C to 70 ° C (-40 ° C to 85 ° C)PARAMETER SYMBOL MIN TYP. MAX UNITS NOTEData Rate B 50 155 200 Mb/sOutput Optical Power9/125 µm fiberPout −15 --- -8 dBm AverageExtinction Ratio ER 8.2 --- --- dBCenter Wavelength λ C 1261 <strong>1310</strong> 1360 <strong>nm</strong>Spectral Width (RMS) ∆λ --- --- 4.0 <strong>nm</strong>Rise/Fall Time (10−90%) T r, f --- 1 2 nsMax. P out TX-DISABLE Asserted P OFF --- --- −45 dBmOutput Eye Compliant with Telcordia GR-253-CORE Issue 3 and ITU-T recommendation G-957Differential Input Voltage V DIFF 0.4 --- 2.0 VPage 2 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetReceiver Electro-optical CharacteristicsVcc = 3.1 V to 3.5 V, T C = 0 ° C to 70 ° C (-40 ° C to 85 ° C)PARAMETER SYMBOL MIN TYP. MAX UNITS NOTEData Rate B 50 155 200 Mb/sOptical Input Power -maximum P IN 0 --- --- dBm Note 1Optical Input Power –minimum(Sensitivity)P IN --- --- −32 dBm Note 1Operating Center Wavelength λ C 1260 --- 1600 <strong>nm</strong>Data Output Rise, Fall Time(10%~90%)T r, f --- 1 2 nsLoss of Signal-Asserted P A --- --- −32 dBmLoss of Signal-Deasserted P D −45 --- --- dBmLoss of Signal-Hysteresis P A − P D 1.0 --- --- dBDifferential Output Voltage V DIFF 0.5 --- 1.2 VReceiver Loss of Signal OutputVoltage-LowReceiver Loss of Signal OutputVoltage-HighRX_LOS L 0 --- 0.5 VRX_LOS H 2.4 --- V CC VNote 1: The input data is at 155.52 Mbps, 2 23 −1 PRBS data pattern. The receiver is guaranteed to provide output data with BitError Rate (BER) better than or equal to 1 × 10 –10 .Page 3 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetBlock Diagram of <strong>Transceiver</strong>ELECTRICAL SUBASSEMBLYDATADATA/TX_DISABLELD Driver&Fault SenseLASERTX_FAULT(0)(1)(2)MOD_DEFOPTICALSUB-ASSEMBLIESDUPLEX SCRECEPTACLEDATADATA/RX_LOSPOST-Amp&LOS DetectRRE-AMPLIFIERICPhotoDiodeTOP VIEW (Label side)Transmitter SectionThe transmitter section consists of a <strong>1310</strong> <strong>nm</strong> InGaAsP laser in an eye safe optical subassembly (OSA) which mates to the fibercable. The laser OSA is driven by a LD driver IC which converts differential input LVPECL logic signals into an analog laserdriving current.TX_DISABLEThe TX_DISABLE signal is high (TTL logic “1”) to turn off the laser output. The laser will turn on when TX_DISABLE is low(TTL logic “0”).Receiver SectionThe receiver utilizes an InGaAs PIN photodiode mounted together with a trans-impedance preamplifier IC in an OSA. This OSAis connected to a circuit providing post-amplification quantization, and optical signal detection.Receive Loss (RX_LOS)The RX_LOS is high (logic “1”) when there is no incoming light from the companion transceiver. This signal is normally used bythe system for the diagnostic purpose. The signal is operated in TTL level.Page 4 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetDimensionsDIMENSIONS ARE IN MILLIMETERSALL DIMENSIONS ARE 0.2mm UNLESS OTHERWISE SPECIFIEDUnit: mmPage 5 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetSFP host board mechanical layoutYXL X A S1ASXY1PIN1L X A SPIN1A S B SLEGEND1.PADS AND VIAS ARE CHASSIS GROUND2.THROUGH HOLES, PLATING OPTIONAL3.HATCHED AREA DENOTES COMPONENTAND TRACE KEEPOUT(EXCEPT CHASSISGROUND)4.AREA DENOTES COMPONENT KEEPOUT(TRACES ALLOWED)DIMENSIONS ARE IN MILLIMETERSA S B SA S B SUnit: mmPage 6 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetAssembly drawing41.73±0.53.5±0.31.7±0.9PCBBEZELCAGE ASSEMBLYBELOW PCB9.8 MAX15.0 MAX11.0 REF.15.25±0.10.4±0.110.4±0.116.25±0.1MSA-SPECIFIED BEZELPCBDIMENSIONS ARE IN MILLIMETERSUnit: mmPage 7 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetPin Assig<strong>nm</strong>entPin-OutPIN 11PIN 20PIN 10PIN 1Pin Signal Name Description1 T GND Transmit Ground2 TX_FAULT Transmit Fault3 TX_DISABLE Transmit Disable4 MOD_DEF (2) SDA Serial Data Signal5 MOD_DEF (1) SCL Serial Clock Signal6 MOD_DEF (0) TTL Low7 RATE SELECT Open Circuit8 RX_LOS Receiver Loss of Signal, TTL High, open collector9 R GND Receiver Ground10 R GND Receiver Ground11 R GND Receiver Ground12 RX− Receive Data Bar, Differential PECL, ac coupled13 RX+ Receive Data, Differential PECL, ac coupled14 R GND Receiver Ground15 V CCR Receiver Power Supply16 V CCT Transmitter Power Supply17 T GND Transmitter Ground18 TX+ Transmit Data, Differential PCEL, ac coupled19 TX− Transmit Data Bar, Differential PCEL, ac coupled20 T GND Transmitter GroundPage 8 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw


<strong>RoHS</strong> <strong>compliant</strong><strong>1310</strong> <strong>nm</strong> <strong>Single</strong>-<strong>mode</strong> <strong>Transceiver</strong> (<strong>S1.1</strong>)<strong>Small</strong> Form Pluggable (SFP), 3.3V, with Diagnostic Monitoring155 Mbps SONET OC-3/SDH STM-1/125 Mbps Fast EthernetEye Safety MarkThe LS3 series <strong>Single</strong>-<strong>mode</strong> transceiver is a class 1 laserproduct. It complies with EN 60825-1 and FDA 21 CFR1040.10 and 1040.11. In order to meet laser safetyrequirements the transceiver shall be operated within theAbsolute Maximum Ratings.Required MarkClass 1 Laser ProductComplies with21 CFR 1040.10 and 1040.11CautionAll adjustments have been done at the factory beforethe shipment of the devices. No maintenance and userserviceable part is required. Tampering with andmodifying the performance of the device will result invoided product warranty.Note : All information contained in this document is subject to change without notice.Page 9 of 9Version 1.0Date: 11/30/2005Headquarters :12 Shyr Jiann Road, Hsinchu Industrial Park, Hukow,Hsinchu Hsien,, Taiwan 303TEL: +886-3-5986799FAX: +886-3-5986655Website: www.apacoe.com.tw

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!