Baker maric flow control valves - Premier Valves

Baker Maric Flow Control Valves3Product DataScrewed TypeF.F available in all sizes. Other configurations inlimited sizes only. First figure denotes inlet.Available in: DR Brass, Chrome,Gunmetal, UPVC, 303, 304, 316 SSSelect desired flow rate from‘Flow rate data’ at bottom of page.Sizes: 1/8”, 1/4”, 3/8”, No 15(½”), No 20(3/4”),No 25(1”), No 32(1 1/4”), No 40(1 ½”),No 50(2”)(Max.flow L/M): 9, 9, 9, 23, 54, 114, 233, 233, 342Wafer TypeDesigned for mounting between flanged pipe fittings.Any drilling. Flow rates available from 0.4 liters / minute up tothe maximum listed below:Available in: UPVC, ABS (plastic), Lg2 Gunmetal & 316 SSWafers are supplied with an o’ring in each facefor sealing. 65mm x 4 orifice wafer shown.Sizes: 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300(Max.flow L/M): 233, 233, 233, 342, 456, 699, 1279, 2320, 4427,6058, 8854Standard Wafer O.D. Is located by flange bolts.Full Flanged Wafer to order.Insert TypeAvailable in various materials and flow rates from0.4L/M upwards in various types including :Flanged insert:Tap Insert:Plain insert:For water meter flow control.Fitted into 13 to 40mm tails.For screwing into existingtapware. Flows up to 9 L/M.Various applications includingpress fitting into OEM’sEquipment.The illustrations in this catalogue are subject to modifications without notice.premierP.O. Box 11735, Randhart, South Africa, 1457sales@premiervalves.co.zavalves (Pty) LtdT +2711-908-3760 F +2711-908-1268www.premiervalves.co.za