Type A - EN44, EN88 Installation Instructions - Dodge Engineering ...

More documents

Recommendations

Info

Dodge Engineering & Controls, Inc.Toll Free (877) 334-2875 Fax: (978) 244-1422InstallationInstallationEN44 and EN88 Non-Spring Return Electronic ActuatorsCLOCKWISETO OPEN"0"1COUNTERCLOCKWISETO OPEN90˚90˚245˚90˚2'45˚90˚self a daptself a dapt00self adaptself adaptPL0060R2only for:0-10V and 00-20 mACONTROL SIGNALS3only for:0-10V and 00-20 mACONTROL SIGNALSNOTE: For a direct-acting feedback signal to track the actuator position, set both DIP switches as shown.Figure 2. Setting Direction of Rotation.3'24 mm60-90 lb-in(7-10 Nm)Torque51b90904590459034EA0532R2EA0533R3Figure 3. Mounting the Actuator to the Damper Shaft.129-271 EAI/EN4-2 DEI, Inc. Rev. 10/04Rev. 4, October, 2004
Dodge Engineering & Controls, Inc.Toll Free (877) 334-2875 Fax: (978) 244-1422InstallationEN44 and EN88 Non-Spring Return Electronic ActuatorsCENTER THEMOUNTING BRACKETIN THE SLOTCAUTION:THESE HOLES FOR USE WITHACCESSORY KITS ONLY. DO NOTUSE IN THE INSTALLATION OFDIRECT-COUPLED APPLICATIONS1/21/2∅4 mm5/32 in.cddEA0786R3Figure 4. Attaching the Mounting Bracket.Manual OverrideTo move the damper blades and lock in the positionwith no power present:1. Slide the red manual override switch toward theback of the actuator.2. Make adjustments to the damper position.3. Slide the red manual override switch toward thefront of the actuator.ADJUSTMENTLEVER902Once power is restored, the actuator returns toautomated control.4590MANUALPL0013R2AUTO31Figure 5. Manual Override.129-271 EAI/EN4-3 DEI, Inc. Rev. 10/04Rev. 4, October, 2004
Page 1: 9090Dodge Engineering & Controls, I
Page 5: Dodge Engineering & Controls, Inc.T
Page 8 and 9: Dodge Engineering & Controls, Inc.T

Type A - EN44, EN88 Installation Instructions - Dodge Engineering ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?