4096-757 - General Dynamics SATCOM Technologies

More documents

Recommendations

Info

General DynamicsSeries 1385 - 3.8M Rx/Tx Antenna SystemC4 Systems 4096-7571Feed Rod HolesFeed Support HolesAt Bottom243Figure 5: Standard Quadrant Orientation3Feed Support HolesAt TopFeed Rod Holes4 21Figure 6: Inverted Quadrant Orientation11
General DynamicsSeries 1385 - 3.8M Rx/Tx Antenna SystemC4 Systems 4096-7573.4. Reflector Support AssemblyThe reflector support is the metal frame that supports the reflector, attaches the reflector to the Az/ElPositioner, and thus allows adjustment of the antenna elevation angle. The following figures and textdescribe the steps necessary to assemble the reflector support.CAUTIONThe reflector support frame includes a precision alignment feature. Do not drop or drag the frame duringthe installation process. Do not attempt to adjust the round tube spacers in the frame assembly, as theseare factory pre-set. If these spacers are loose or damaged, or there is any obvious damage to the frame,then you must obtain replacement parts for a successful installation.Q 464Q 3512211Q 1Q 2Figure 7: Threaded Insert Location Layout (Front View)15264Item 21Item 20Item 19Reflector Support Assembly1. Before beginning the reflector supportassembly, as shown in Figure 8,Threaded Insert Assembly Detail,install the 12 threaded inserts (items 1– 6) thru the face of each reflectorquadrant.2. Secure inserts with 7/8" hardware(items 19, 20, 21). Snug but do nottighten the hardware.Note that there are five different insertlengths, and the assembly requires fourof number 1 and two each of numbers 2,4, 5, & 6. Each insert must be in thecorrect position in each quadrant forcorrect assembly. The top of each insertis stamped with an insert number. Thenumbers shown in Figure 7, ThreadedInsert Location Layout, correspond withthe stamped numbers on the inserts.Quadrant FaceThreaded InsertFigure 8: Threaded Insert Assembly Detail12
Page 1 and 2: 4096-757Revision EMay 13, 2009ASSEM
Page 3 and 4: General DynamicsSeries 1385 - 3.8M
Page 17: General DynamicsSeries 1385 - 3.8M
Page 33: General DynamicsSeries 1385 - 3.8M

4096-757 - General Dynamics SATCOM Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?