Zero-Point-SyStemS - STOCKFER

WHERE CAN I GET AN INSTALLATION DIAGRAM or installation manual?> We are happy to send them immediately when customers request them by e-mail..IS THE CLAMPING MODULE SUITABLE FOR ERODING?> The module is optimally suited for all normal processes, such as eroding, grinding, cutting andturning. Through the complete sealing, the clamping module can be used in liquids and underrough ambient conditions.IS THE CLAMPING MODULE SUITABLE FOR USE ON INJECTION MOULDING MACHINES?> Especially when injection moulds are changed frequently, the costs for a zero-point solution areamortized within the shortest of times for such machines. Unlike with mechanical clamps,clamping takes place quickly and easily just by pressing a button.HOW HIGH IS THE MAX. OPERATING TEMPERATURE OF THE CLAMPING MODULES?> The maximum processing temperature is 80°C in the standard design. Clamping modules foruse at higher temperatures can be requested at any time.WHAT IS BLOW-OUT AND HOW DOES IT WORK?> Blow-out using compressed air is guided through the floor of the clamping module and blows outcontamination, such as chips, coolant or the like from the central opening and from the spherespace of the module.WHEN DO I USE THE HYDRAULIC PRESSURE INTENSIFIER ANDWHEN THE PNEUMATIC PRESSURE INTENSIFIER?> Hydraulic pressure intensifier: This transforms the pneumatic into hydraulic pressure in a ratio of1:8 to open hydraulic modules. Pneumatic pressure intensifier: This is used to intensify thepneumatic pressure in the ratio of 1:2 for pneumatic clamping modules and compensates forpressure fluctuations in the supply line.HOW DOES THE PATENTED SAFETY SYSTEM WORK IN THE HYDRAULIC CLAMPING MODULEAND WHEN IS IT USED?> If the piston seal begins to leak, the spring space quickly fills with oil. The result is: The piston blocks andthe module can no longer be opened. Destruction of the clamped fixture of the of clamping modulewould then be unavoidable. Here, the patented safety system ensures that the oil in the spring space canescape and the piston can be operated.Subject to technical alterations.ANDREAS MAIER FELLBACH ∙ www.amf.de Zero-Point-Systems 11