Zero-Point-SyStemS - STOCKFER

DETAILLARGE INTAKECATCHMENTSWING-FREEMEDIA FEEDNo laborious searching for the holesanymore - self-centring via the diagonal sidesurfaces of the engagement nipple screw.FORM FITSwing-free run-in and run-out through theoptimal contour of the clamping nipple.THREE-POINTPRINCIPLEDue to the lateral media feed, low palletthicknesses are possible and fewer feedholes are necessary.NO BALL CAGEThe balls are optimally encapsulated on 3sides. As a result, the clamping nipple alwaysremains firmly clamped in the module.RUSTPROOFSTAINLESS STEELPower transmission by means of thethree-point principle! This optimised forcedistribution prevents shearing load on theballs.BLOW OUTThe balls lie freely in the ball canal. Thisfreedom of movement enables the balls tocontinuously re-position themselves.SIMPLE CLEANINGHigh-alloy, hardened tool steel - and so nocorrosion.Our system has a pneumatic blow-outinstalled at the factory. As a result, chips anddirt inside are effectively blown out.Our zero-point clamping sytems can beblown out very simply with a commerciallyavailable compressed air cleaning pistol anddo not require complicated suctioning out.GOOD HOLDING,PULL-IN AND LOCKINGFORCESLARGE BALLDIAMETERSAFETY SYSTEMSizeHoldingforcePull-in/locking forcehydr.pneum.K5 13 5 1,5K10 25 10 8K20 55 20 17K40 105 40 30Ball surface is 784% greater than withtraditional ball systems.Process reliability - Clamping module alwaysopens. A piston blockade is thus impossible.Subject to technical alterations.