Wheel Loader - Kelly Tractor

Operating SpecificationsRated bucket capacity (§)Struck capacity (§)Bucket widthDump clearance at fulllift and 45° discharge (§)Reach at full liftand 45° discharge (§)Reach at 45° dischargeand 2130 mm (7 ft 0 in) clearance (§)Reach with lift armshorizontal and bucket levelDigging depth (§)Overall lengthOverall height with bucketat full raise (§)Loader clearance circle withbucket in carry position (§)Static tipping load straight (§)Static tipping loadfull 40° turn (§)Breakout force (§)Operating weightm 3yd 3m 3yd 3mmft/inmmft/inmmft/inmmft/inmmft/inmminmmft/inmmft/inmmft/inkglbkglbkglbkglbGeneral PurposeWith Bolt-On With Bolt-On With Bolt-OnCutting Edge Teeth & Segments* Teeth*1.8 2.1 1.8 2.1 1.7 2.02.3 2.7 2.3 2.7 2.2 2.61.5 1.7 1.5 1.7 1.4 1.62.0 2.2 2.0 2.2 1.8 2.12550 2550 2585 2585 2585 25858’ 4” 8’ 4” 8’ 6” 8’ 6” 8’ 6” 8’ 6”2760 2691 2656 2587 2656 25879’ 1” 8’ 10” 8’ 9” 8’ 6” 8’ 9” 8’ 6”865 934 969 1037 969 10372’ 10” 3’ 1” 3’ 2” 3’ 5” 3’ 2” 3’ 5”1357 1386 1399 1424 1399 14244’ 5” 4’ 6” 4’ 7” 4’ 8” 4’ 7” 4’ 8”2133 2230 2279 2376 2279 23767’ 0” 7’ 4” 7’ 6” 7’ 10” 7’ 6” 7’ 10”110 118 110 118 85 934” 4.5” 4” 4.5” 3.5” 3.5”6890 6993 7036 7138 7017 712022’ 7” 22’ 11” 23’ 1” 23’ 5” 23’ 0” 23’ 4”4743 4870 4743 4870 4743 487015’ 7” 16’ 0” 15’ 7” 16’ 0” 15’ 7” 16’ 0”11 218 11 276 11 339 11 399 11 339 11 39936’ 10” 37’ 0” 37’ 2” 37’ 5” 37’ 2” 37’ 5”7868 7785 7700 7614 7862 780217,310 17,127 16,940 16,750 17,296 17,1646886 6806 6717 6635 6872 681215,149 14,973 14,777 14,597 15,118 14,9869876 8902 9756 8782 10 660 953521,727 19,584 21,463 19,320 23,452 20,9779907 9960 10 042 10 095 9957 10 01021,795 21,912 22,092 22,209 21,905 22,022Specifications shown are for 924Gz with optional counterweight, standardlubricants, full fuel tank, ROPS cab, 80 kg (176 lb) operator and 17.5 - 25 12PR (L2)tires.Note: Specifications and ratings conform to all applicable standards recommendedby the Society of Automotive Engineers (SAE). SAE Standards J732 JUN92 and J742FEB85 govern loader rating, denoted in the text by (§).* Dimensions are measured to the tip of the bucket teeth to provideaccurate clearance data. SAE standards specifies the cutting edge.16 924Gz specifications