Raupiano Plus Product Book | Rehau | Reece Plumbing

7.3 Handling cut lengths7.4 Installation of additional fittingsCut lengths (pipes with smooth ends) can be handled with double socketsand slip-on socket up to a maximum pipe length of 3 m.The installation of additional fittings in an existing pipeline is possible withslip-on socket:Pipe stopperDouble socketSlip-on socketIf pipe sections with fittings or short pipes are formed:- Prevent the pipe components from sliding apart with fixing brackets.- Secure socket plug from being pushed out by installing securing clip.1. Cut out a sufficiently long section of pipe from the pipeline:fitting length + 2 x pipe outer diameter2. De-burr pipe ends.3. Slide slip-on socket all the way onto one end of the pipe.4. Slide fitting onto the other end of the pipe.5. Fit adapter into the remaining space of the pipe and de-burr.6. Slide second slip-on socket all the way onto the adapter.7. Insert adapter and close both gaps by sliding the slip-on socket.Use REHAU lubricant liberally here.Fig. 7-3Installing fitting.1 slip-on socket d a Pipe outer diameter2 Adapter1 5 331 5max. 10xODmax. 10xODmax. 10xOD42 4 55 4 2 4max. 10xODmax. 10xODmax. 10xODFig. 7-2Using double sockets and slip-on socket in vertical stacksFig 7-4Using double sockets and slip-on socket in horizontal installations1 Double socket2 Slip-on socket3 Guiding clamp (green)4 Guiding clamp (green) at 15-20mmdistance to the slip-on socket5 Sound-dampening bracket6 Sound-dampening bracketat 15-20mm distance to theslip-on socket1 Double socket2 Slip-on socket3 Guiding clamp (green)4 Guiding clamp (green) at 15-20mmdistance to the slip-on socket5 Fixing clamp (black)32