1 Electronic Flow Meter FC01 - FlowVision GmbH

More documents

Recommendations

Info

.709FC01 - Cable types and accessories (CST)Cable types 15/18 with connectorsDescriptionCable between Flow Meter FC01-xxx and calorimetric monitoringhead type CST.1● Connection to monitoring head by means of 8-pole roundconnector● Connection to FC01-xxx by means of 10-pole clampingconnector (XSK)Do + Ka type 15Do + Ka type 18Do + Ka type 15-STDo + Ka type 18-STTechnical dataCable type 15 and 15-STFeatures: highly flexible, paired, fully shielded,electrical and thermal properties at +20 °CConductor resistance:Insulation resistance:Operating voltage:Withstand voltage:Ordering information< 92 Ω/km> 200 MΩ/kmmax. 100 V ACAC 800 VMax. load:0.5 ATemperature range: -10 °C...+80 °C (processing and operation)-30 °C...+80 °C (transport and storage)Cable type 18 and 18-STFeatures: non-halogenous, highly flexible, cold- and heat resistant,paired, fully shielded, electrical and thermal propertiesat +20 °CConductor resistance: < 80 Ω/kmInsulation resistance: > 200 MΩ/kmOperating voltage: < 300 V ACWithstand voltage: 1500 V / 50 Hz / 1 minMax. load:3 ATemperature range: -60 °C...+200 °CAccessories8-pole round connector(without cable, for individual wiring by customer)0Z112Z003124ø18501.9710-pole clamping connector for cable types 15 and 18(without cable, for individual wiring by customer)0Z112Z00016710-pole clamping connector for cable types 15-ST and 18-ST(without cable, for individual wiring by customer)0Z112Z000205Typ between calorimetric monitoring heads CST and FC01, FC01-FHDo + Ka type 15 PVC insulated cable, type LifYCY 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorDo + Ka type 18 silicone insulated cable, type 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorAvailable cable lengths...m 2 m, 3 m, 5 m, 8 m, 10 m, 15 m, 20 m, 25 m,30 m, 40 m, 50 m, 60 m, 70 m, 80 m, 90 m,100 m, 110 m, 120 m, 130 m, 140 m, 150 m,160 m, 170 m, 180 m, 190 m, 200 mDo + Ka type 15 - 2 m ordering exampleTypebetween calorimetric monitoring heads CST and FC01-STDo + Ka type 15-ST PVC insulated cable, type LifYCY 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorDo + Ka type 18-ST silicone insulated cable, type 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorAvailable cable lengths...m 2 m, 3 m, 5 m, 8 m, 10 m, 15 m, 20 m, 25 m,30 m, 40 m, 50 m, 60 m, 70 m, 80 m, 90 m,100 m, 110 m, 120 m, 130 m, 140 m, 150 m,160 m, 170 m, 180 m, 190 m, 200 mDo + Ka type 15-ST - 2 mordering exampleReducing piecefrom G3/4 to G1/2Material: stainless steel 1.4571/AISI Ti 3160Z032Z000149SW30241.18 .945G1/2AG3/4AThis is a metric design and millimeter dimensions take precedence ( mm )inchCaution: Standard warranty cover will be invalidated if the correctE-T-A monitoring head/control unit connecting cable is notused.1 - 56www.e-t-a.comIssue A(010108)
SW20ø18M16x0.75round connectorFC01 - Monitoring head CSF-01DescriptionMonitoring head CSFExtended calorimetric monitoring head for Flow Meter FC01, suitablefor use in air-conditioning systems (variable immersion depth).Caution: - Calibration to flow velocity, therefore do not use withFC01-CA.- Fix with locking set 01 (see accessories).Features● Medium temperature range: -40 °C...+130 °C● Material: stainless steel 1.4571/AISI 316 Ti1CSF-01variable immersion depthOrdering informationTechnical dataTypeCSFExtended monitoring head with calorimetric sensorsMonitoring head design01 Monitoring head with variable immersion depthMediumA airW waterMaterial of areas exposed to mediumM1 stainless steel 1.4571/AISI 316 TiProcess connection00 without flange; see accessoires for cable gland**)Length of shank/threadL43 188 mm (standard with process connection 00)other lengths upon requestElectrical connectionE10 round connector with tinned contacts(plug and cable to separate order)CertificationT0 without certificate standard *)Specification of mediumxxxCSF - 01 A M1 00 L43 E10 T0 - ... ordering example*) for detailed information please see section 0.**) see next page.DimensionsType of headNominal shank dia.Length of shankLength of sensorSuitable forTemperature range*)(of medium)Temperature driftof sensorpush-in18 mm188 mm (standard)14 mmair(please enquire for other gases)-40...+130 °C / stainless steel± < 0.05 %/°K/measuring range(in the range between +20 °C and +80 °C)Measuring ranges: air: 0...20 m/s (atmospheric pressure)water: 0...3 m/sPressure resistance (1) 100 bar / 1470 PSIof sensor DIN 2401Pressure resistance depending on threaded installation bushof installation2 bar/16 bar (29.4 PSI/235.2 PSI), see next pageDegree of protection connector( 2) : IP67Materialstainless steel 1.457/AISI 316 TiCable to LifYCY 4x2x0.2 mm 2 (AWG 24)electronic unit(1) Admissible operating pressure DIN 2401, measured at max. temperature(= max. medium temperature)(2) with mating connector*) max. +85 °C in the connector areaø2214.866 .551L9.5.374.709.78714.551TypeLmm inchCSF-…L43… 188 7.40CSF-…L30… 300 11.81CSF-…L40… 400 15.75monitoring head should bealigned in direction of flow(see arrow)This is a metric design and millimeter dimensions take precedence ( mm )inchIssue A(010108)www.e-t-a.com 1 - 57
Page 1: Electronic Flow Meter FC01Descripti
Page 4 and 5: 12345671213243546576879122334152637
Page 8 and 9: FC01 - Cable types and accessories
Page 10 and 11: FC01 - Monitoring head CSF-03Flange
Page 12 and 13: FC01 - Monitoring TST-..HM2Monitori
Page 14 and 15: .709FC01 - Cable type and accessori
Page 16 and 17: FC01 - Turbine-type monitoring head

1 Electronic Flow Meter FC01 - FlowVision GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?