TUBING - Teesing BV

THERMOTUBE ® HT/HTX - TUBINGTHERMOTUBE ® HT/HTXAPPLICATIONFor Transport of High Temperature Steam orLiquids ThermoTube Pre-Insulated Tubing HT,HTX and HTX2 are non-heated tube bundles totransport high temperature steam / liquids orfor sample lines and impulse lines to pressureinstruments. These products are used whereheat tracing is deemed unnecessary such asindoors or in climates that do not experiencesubfreezing temperatures. They limit heatlosses for energy conservation and providepersonnel protection by limiting outer jackettemperatures. High temperatue ThermoTubepre-insulated tubing bundles are offered inthree popular configurations, ranging from399°C service to continuous operation at 593°C.SL - 4 F 1 65 - ATP - HTXHT = 399°C ContinuousHTX = 593°C ContinuousHTX2 = 593°C Intermittent Exposure forSuperheat Steam ServiceJACKET OPTION TYPEATP 2TPUTUBE WALL THICKNESS35 = .035”49 = .049”65 = .065”83 = .083” (SS Only)TUBE1PROPERTIES• “Touch Safe” Jackets Protect Personnel• “Cut-to-Length” Coils for Fast Installation• Conserves EnergyCONSTRUCTION1 Process Tube2 High Temperature Woven Glass FiberThermal Insulation3 Thermal Diffusion Foil4 Heat Reflective Foil5 Non-hygroscopic Glass Fiber Insulation6 Polymer Outer Jacket (ATP or TPU)PRODUCT INFORMATION123456TUBE MATERIALA = 316 SS WeldedD = Monel1E = TitaniumF = 316 SS SeamlessJ = Alloy C276K = Alloy 825L = Alloy 20R = 316H SeamlessTUBE O.D.2 = 1/4”3 = 3/8”4 = 1/2”6 = 6 mm8 = 8 mm10 = 10 mm12 = 12 mmHigh temperature option -HT -HTX -HTX2Service Temperature 399°C 593°C 593°CIntermittent*Nominal Bundle Diameter 76 mm 89 mm 58 mmMinimum Bend Radius 406 mm 508 mm 305 mm* Intermittent exposure is up to 2 minutes per cycle.BUNDLE TYPESL = Single tube32 | TEESING 250913 250913 TUBING | 33