Measuring Nipples

Middle-/High-Pressure Measuring-SystemsTEMA Complete SetSystem 100Technical descriptionThe design of the TEMASystem 100 allows the controlof static and dynamic pressuresas well as vacuums. With theintegrated self-venting device(as standard), it is easy to evacuateany air bubbles.This guarantees an accuratedisplay of the measured value,especially with dynamic pressures.The measuring nipplesare available with variousconnection options. They havevery small dimensions and canthus be fitted very easily to theequipment.Thanks to the design and choiceof materials, the nipples aremaintenance-free. The measuringdevice with the pressuregauge is fitted with a TEMAquick connect coupling. Thisguarantees coupling to themeasuring nipples in a matterof seconds.With the shut-off device in theplug and in the body of thecoupling, the TEMA System100 allows a dry break, duringcoupling as well as during uncoupling.For measuring at adistance, a flexible extensioncable is available; this can becoupled between the measuringnipple and the measuring system.Thanks to its wide rangeof connections, the TEMASystem 100 is a versatile andflexible measuring system.Maximum working pressureMeasuring nipple T120:40 MPa (400 bar)Other parts:60 MPa (600 bar)Nominal Diameter1,2Middle-/High-Pressure Measuring-SystemsYou can never havetoo many good connections.Complete Hydraulics SetThe TEMA System 100 Complete Set isdelivered in a plastic case and containsthe following parts:1 piece measuring handle T101-2 and pressure gaugeof your choice*1 piece measuring nipple T1201 piece measuring cable T130, length 2.5 m, complete1 piece adapter T135, G 1/4‘‘ IG x G 1/8‘‘ AG1 piece adapter T136, G 1/8‘‘ IG x G 1/4‘‘ AGIn the measuring case there is additional room for twofurther pressure gauges as well as an adapter T139. Iftwo pressure gauges are required, the part number is,for example, T106-13 (Complete Set with one pressuregauge 0-100 bar and one pressure gauge 0-40 bar).* If measuring handle T101-21A is required insteadof T101-2, this must be added to the order.Description Part Number DSComplete set not including pressure gaugeComplete set with 1 pressure gauge -1 to 1.5 barComplete set with 1 pressure gauge -1 to 15 barComplete set with 1 pressure gauge 0 to 10 barComplete set with 1 pressure gauge 0 to 16 barComplete set with 1 pressure gauge 0 to 25 barComplete set with 1 pressure gauge 0 to 40 barComplete set with 1 pressure gauge 0 to 60 barComplete set with 1 pressure gauge 0 to 100 barComplete set with 1 pressure gauge 0 to 250 barComplete set with 1 pressure gauge 0 to 400 barComplete set with 1 pressure gauge 0 to 600 barTEMA System 100T101T104T105T110T111T112T113T114T106T107T108T109Additional Equipment/PneumaticsTEMA System 100DescriptionLmmGmmWrenchsizeWeightgMax. workingpressure barPart NumberDS1 Measuring nipple36G 1/8“152020 T11410 MN-1251 Coupling37G 1/8“154050 T1100 NRECTUS, TEMA and NYCOIL are RECTUS Group brandsPressure gauge:see Page 423.430DS = Delivery Status: in stock on short call medium term delivery431

Middle-/High-Pressure Measuring-SystemsTEMA System 100High-Pressure HosesTechnical descriptionTEMA high-pressure hose –produced for measurementsand mini-hydraulic systems.Exact selection of materialsand production under strictcontrol contribute to thesatisfaction and reliablesafety of the product. Max.working pressure 630 bar.MaterialInner and outer hose:high-quality POLYAMIDEAdvantagesl Remains flexible, evenunder full working pressure,thanks to its small externaldimensions and a suitablechoice of materials.l Resistant to all mineraland most synthetic oilsl Resistant to ageingl No increase in volume(no differences inmeasurements)l Temperature range from-40°C to +100°CIn order to achieve optimal durability, the hoses can be strengthened with aspring at each end.Add-on code “F” after the itemnumber of each connection.Ordering example for a complete high-pressure hose:B C DT200K 1,6 T210F T240PA11hoseTotallengthmG 1/8female thread+ springPressure gaugeconnectionG 1/4“ConnectionsCaution! The hoses are produced in various lengths.Please specify hose and/or total length incl. connecting fittings.Design subject to alterations.Measuring pipe socketM 16 x 2.0 female thread for measuring nippleM 16 x 1.5 female thread for measuring nippleM 12 x 1.5 female thread for measuring nippleM 8 x 1 female threadM 8 x 1 male threadTEMA System 100 High-pressure HosesPart Part Number DST270T272T271T280T281TEMA System 100Middle-/High-Pressure Measuring-SystemsPressure carrier: KEVLARCaution: If the hoses are tobe used for compressed air,this must be mentioned inthe order.TypeT200KT400KWorkingPressure630 bar500 barBurstPressure2000 bar2000 barInnerdimensions2,0 mm4,1 mmOuterdimensions4,9 mm8,0 mmTemperature range from -40°C to +93°C.Measuring nipples can be mounted very easily on machines usingmeasuring supports or screwed pipe joints.Also available with T126 K metal protection cap (see page 432).L32323232D15151515G1/8“ i.1/8‘‘ i.1/8‘‘ i.1/8‘‘ i.d681012PressurewidthL/SL/SL/SL/SInternalthreadG 1/8“G 1/8“G 1/8“G 1/8“Part NumberT160-1T161-1T162-1T163-1Part Numberincl. measuring nippleT160T161T162T163DSConnectionsTEMA System 100 High-pressure Hoses323215151/8‘‘ i.1/8‘‘ i.1415SLG 1/8“G 1/8“T164-1T165-1T164T165Caution! The hoses are produced in various lengths.Please specify hose and/or total length incl. connecting fittings.Design subject to alterations.Part ND Part Number DSMeasuring cableTEMA System 100G 1/8 female thread7/16-20 UNF22T210T211Measuring cables in other designs and lengths on request.PartPart NumberDSG 1/8 male thread2T220Measuring cable for coupling the measuring handle T101-2 to measuring nipples.T1309/16-18 UNF2T212Supplied as standard with measuring nipple (T120) and coupling (T150); 2.5 m.1/2-20 UNF2T213Measuring cable for coupling the measuring handle T101-2 to measuring nipples.T1319/16-18 UNF2T215Supplied as standard with measuring nipple (T120) and coupling (T150); 5 m.9/16-18 UNF11/16-18 UNF9/16-18 UNF 90°422T415T216T217AccessoriesTEMA System 1009/16-18 UNF 90°DIN connection with O-ring seal for Ø 8 Class L (DKO 08) G: M 14 x 1,542T417T262LPartPart NumberDSPipe socket Ø 6 mm (BE-06)Pipe socket Ø 8 mm (BE-08)Plug222T230T231T235T140T135Adapter, G 1/4“ i. x G 1/8“ o.Adapter, G 1/8“ i. x G 1/4“ o.Adapter, G 1/8“ i. x G 1/4“ i.T135T136T137Changeover adapter for measuring nipple with M16 thread to TEMA System 100T139Ring socket for banjo bolt Ø 10 mm2T238Angle 90°, G 1/8“ i. x G 1/8“ i.T140Pressure gauge connection G 1/4 female thread2T240T276T139Plastic case (without picture)Rubber guard for pressure gauge, Ø 68 mm (without picture)T101-1T100-40Measuring nipple M 16 x 2 / G 1/4“T276DIN connection with O-ring seal for Ø 6 Class L (DKO 06) G: M 12 x 1,52T260LMeasuring nipple M 16 x 2 / G 3/8“T277DIN connection with O-ring seal for Ø 6 Class S (DKO 06) G: M 14 x 1,52T260SDouble nipple with connecting thread for measuring nipple, G: 1/4“; g: G 1/8“TDNT2-1Double nipple with connecting thread for measuring nipple, G: 3/8“; g: G 1/8“TDNT3-1DIN connection with O-ring seal for Ø 8 Class L (DKO 08) G: M 14 x 1,52T261LDouble nipple with connecting thread for measuring nipple, G: 1/2“; g: G 1/8“TDNT4-1DIN connection with O-ring seal for Ø 8 Class S (DKO 08) G: M 16 x 1,52T261SDouble nipple with connecting thread for measuring nipple, G: 3/4“; g: G 1/8“TDNT6-1Double nipple with connecting thread for measuring nipple, G: 1“; g: G 1/8“TDNT7-1DS = Delivery Status: in stock on short call medium term deliveryDS = Delivery Status: in stock on short call medium term delivery434 435