Air Control Units - Sharpe Manufacturing Company

Air Control Units - Sharpe Manufacturing Company

Instructions/PartsAir Control Units310601FENGMaximum Working Pressure: 160 psi (1.1 MPa, 11 bar)8240Important Safety InstructionsRead all warnings and instructions inyour equipment manual. Save allinstructions.220372201422013220373213532135321341002834700U06710seepage 2321341002834700U06710seepage 2U346061630see page 233145Model 606BPart No. 6730331451630see page 2Model 606APart No. U06720100288230321348240220148230321341630see page 234700 34606U06710seepage 2100281630see page 234700Model 606CPart No. 6740

Model 606 AIR FILTERPart No. 6710Maximum Working Pressure:160 psi (1.1 MPa, 11 bar)AIR REGULATORPart No. 1630Maximum Working Pressure:160 psi (1.1 MPa, 11 bar)220261002222013100232203722019100031992019929199302203322032220352201210018100161001910015U10008U1000510010U1000634449U1000210013PART NO. DESCRIPTION22026 Screw22013 Bottle Lid22037 Plug22019 Gasket19920 Washer19929 Shield19930 Filter Element22033 Rod Assembly22032 Retainer22035 Nut22012 Mach Filter Bottle34449 Air Cock Regulator ValvePART NO. DESCRIPTION10022 Adjusting Screw10023 Screw10003 Bonnet10018 Washer Spring10016 Pressure Spring10019 Vibration Dampener10015 Diaphragm10008 Valve Body10005 Valve Seat10010 Valve10006 Valve Spring10002 Body10013 Brass Screen2 310601F

Main Air Line 1 in.UnionAAir Control Unitor Air FilterDryaire Membraneor Desiccant AirDrying Systems atPaint BoothCompressorModel 707COil CoalescerBModel 707FAir FilterAir OutDrain LegC15 ft. to 20 ft.Air InRefrigeratedAir DryerBall ValveFlexible Hose Between com-EDRef. Letter Description Model No.A Sharpe 606 U06710Sharpe 606A U06720Sharpe 606B 6730Sharpe 880A 6950Sharpe F88 8130B 707C 6930707F 6920707FC 6910C Dryaire Membrane 6770D Dryaire Desiccant 6760ERefrigerated Air Dryer25CFM 688035CFM 688550CFM 689075CFM 6895310601F 3

1 Year Limited WarrantySharpe warrants this product to the original user against defective material or workmanship for a period of 1 yearfrom the date of purchase.Sharpe reserves the right to determine whether the part or parts failed because of defective material, workmanship,or other causes. Failures caused by accident, alteration, or misuse are not covered by this warranty.Sharpe, at its discretion, will repair or replace products covered under this warranty free of charge. Repairs orreplacements of products covered under this warranty are warranted for the remainder of the original warrantyperiod.Sharpe or its authorized service representatives must perform all warranty repairs. Any repair to the product by unauthorizedservice representatives voids this warranty. The rights under this warranty are limited to the original user andmay not be transferred to subsequent owners.This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitnessfor a particular purpose. Some states do not allow the exclusion or limitations of incidental or consequentialdamages, so the above limitations may not apply to you.Sharpe InformationTO PLACE AN ORDER, contact your SHARPE distributor or call 1-800-742-7731 or visit our website RegistrationThank you for the purchase of your Sharpe ® product. We greatly appreciate your business.Important reasons to register your product:• Registration enables Sharpe to notify you if there is a problem with your product.• Improved Product Development - Your input helps us continue to design products that meet your needs.For the most up-to-date information and to register your product, please go to and click on“Register Product.”All written and visual data contained in this document reflects the latest product information available at the time of publication.Graco reserves the right to make changes at any time without notice.Original instructions. This manual contains English. MM 310601SHARPE MANUFACTURING • P.O. BOX 1441, MINNEAPOLIS, MN 55440-14411-800-742-7731, www.sharpe1.comCopyright 2004, Graco Inc. is registered to ISO 9001Revised 02/2011

More magazines by this user
Similar magazines