Untitled - Orthopartner AG

Splinting MaterialsAquaplast OriginalSplinting111 Aquaplast OriginalRolyanModerate resistance to stretch. Uncoated.Handling Characteristics• Offers the same handling characteristics as Aquaplast-T butbonds instantly and permanently on contact• Tacky on the skin when heated giving the therapist an extrapair of hands during splint fabrication• Controlled stretch and excellent contourHeating and Working Times• 1.6mm for 35 seconds at 70°C-75°C gives 1-2 minutes working time• 2.4mm for 1 minute at 70°C-75°C gives 2-3 minutes working time• 3.2mm for 1 minute at 70°C-75°C gives 4-6 minutes working timeClinical Indications• Perfect for dynamic splinting and outrigger attachments1.6mm - SolidA96430 White 1 sheet 46 x 61cm1.6mm - 13% UltraPerfA964301 White 1 sheet 46 x 61cm554590 Beige 1 sheet 46 x 61cm554591 Beige 4 sheets 46 x 61cm1.6mm - 19% OptiPerfA96435 Beige 1 sheet 46 x 61cm2.4mm - SolidA96439 Beige 1 sheet 46 x 61cm2.4mm - 19% OptiPerfA96444 Beige 1 sheet 46 x 61cm3.2mm - SolidA96431 White 1 sheet 46 x 61cmA96437 Beige 1 sheet 46 x 61cm3.2mm - 19% OptiPerfA96438 Beige 1 sheet 46 x 61cm12 Aquaplast-TSee next pageModerate resistance to stretch. Coated.Handling Characteristics• Optimum combination of intimate conformability andresistance to stretch• 100% memory allows for repeated reheating and splint revisions -increased cost effectiveness and reduced clinical waste• Transparent when heated allowing the user to observelandmarks and potential pressure areas• Easy trim edges for improved patient comfort• Non-stick coating for ease of handling• Aquaplast-T provides a temporary bond by pinching theedges together. Ideal for wrap and tack techniques• For a permanent bond, remove the coating with liquid removeror by scraping with a sharp instrument• Available with anti-microbial component where shownHeating and Working Times• 1.6mm for 35 seconds at 70 - 75°C gives 1 - 2min working time• 2.4mm for 1 minute at 70 - 75°C gives 2 - 3min working time• 3.2mm for 1 minute at 70 - 75°C gives 4 - 6min working time• 4.8mm for 1 - 2 minutes at 70 - 75°C gives 4 - 7min working timeClinical Indications• Serial splinting and economical splint revisions• Hand, wrist and thumb splints• Dynamic outriggers bases8 Orthopartner AG l Ärzte- und Spitalbedarf l Oholten 11 l 5703 Seon l info@orthopartner.ch l www.orthopartner.ch