Marmitek X-10 product guide Marmitek X-10 product guide

More documents

Recommendations

Info

16 16 TECHNICAL INFORMATION ART. NR. 08930 WALL DIMMER LW11 Remote control using Marmitek X-10 Commands ‘Off’ command: turns light off completely ‘On’ brighter: brightens from present light level ‘On’ dimmer: dims from present light level ‘All Lights On’: brightens to 100% light level ‘All Lights Off’: turns light off completely Power: 230V +10% -15%, 50Hz Supply current: 50mVpp at 120kHz Input Impedance: >60_ (L-N) at f=120kHz Fuse: 2.5 A (T) Terminals: Screw connectors for phase, neutral and switched phase Ambient Temperature: 0°C to 50°C (operating), -20°C to 70°C (storage) Like all other Marmitek X-10 modules, the House Code and Unit Code can be changed without rewiring. WARNING Automatic switching devices provide comfort, but can also be dangerous. They can surprise people or can ignite clothing hanging over an electric heat source. Please be careful and take appropriate measures to avoid accidents. WIRING DIAGRAM
MARMITEK ART. NR. 08931 WALL SWITCH AW10 Switch suitable for appliances and lights up to 2200W. Remote control via the mains using Marmitek X-10 Commands. Can be combined with (designer) momentary switches. Manual control is also possible. The AW10 can be built into a standard 50mm switch box. The switch can be controlled remotely via the mains using Marmitek X-10 signals. This means the Marmitek X-10 system can be built into the installation and is totally ‘invisible’. The switch can also be controlled manually as a momentary switch. There are terminals for external momentary switches (of any type or brand), which means the AW10 can also be used in double-throw switch schemes. Momentary switches attached to the AW10 cannot have a glow lamp in series. The AW10 responds to the Marmitek X-10 Commands ‘On’, ‘Off’, and ‘All off’. Phase and Neutral have to be available before the module can be installed. The AW10 comes with mounting frame and cover plate and can be combined with JUNG CD500 Alpine White switching materials. HOME AUTOMATION 17
Page 1 and 2: HOME TOMATIO AUTOMATION Marmitek X-
Page 3 and 4: MARMITEK HOME AUTOMATION MARMITEK X
Page 5 and 6: der control! On the left you see so
Page 7 and 8: MARMITEK HOME AUTOMATION KITS CM11
Page 9 and 10: MARMITEK ART. NR. 08910 LAMP MODULE
Page 11 and 12: MARMITEK ART. NR. 08915 APPLIANCE M
Page 13 and 14: MARMITEK ART. NR. 08944 UNIVERSAL R
Page 15: MARMITEK ART. NR. 08930 WALL DIMMER
Page 19 and 20: MARMITEK ART. NR. 08954 SHUTTER SWI
Page 21 and 22: MARMITEK ART. NR. 08932 DIN RAIL DI
Page 23 and 24: MARMITEK ART. NR. 08933 DIN SWITCH
Page 25 and 26: MARMITEK ART. NR. 08934 PHASE COUPL
Page 27 and 28: MARMITEK ART. NR. 09055 PLUG-IN FIL
Page 29 and 30: MARMITEK ART. NR. 08941 MINI CONTRO
Page 31 and 32: MARMITEK ART. NR. 08939 MINI TIMER
Page 33 and 34: MARMITEK ART. NR. 08945 PC INTERFAC
Page 35 and 36: MARMITEK ART. NR. 08943 UNIVERSAL A
Page 37 and 38: MARMITEK ART. NR. 08942 TTL/CMOS IN
Page 39 and 40: MARMITEK ART. NR. 09196 TRANSCEIVER
Page 41 and 42: MARMITEK ART. NR. 09434 HOME AUTOMA
Page 43 and 44: MARMITEK ART. NR. 08937 WIRELESS SW
Page 45 and 46: MARMITEK ART. NR. 09053 WIRELESS MO
Page 47 and 48: MARMITEK ART. NR. 09190 Wireless Re
Page 49 and 50: MARMITEK ART. NR. 08972 MULTIMEDIA
Page 51 and 52: MARMITEK XCAM XCAM2 Install your ow

Marmitek X-10 product guide Marmitek X-10 product guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?