Consolidated Alloys MATERIAL SAFETY DATA SHEET - Electus ...

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 1: IDENTIFICATION OF THE MATERIAL AND SUPPLIERProduct Name:Other Names:Recommended Use:RESINCORE SOLDERS – High Grade63/37, 60/40, 62/2Ag/36, 60/2Cu/38Used for lower melting point soldering operations.Supplier’s / Manufacturer’sName:Consolidated AlloysAddress:32 Industrial Avenue, Thomastown, Victoria 3074, AUSTRALIATelephone No.: (03) 9359 5811Emergency No.:(03) 9359 5811 – Business Hours0439 062 480 – After Hours (24Hrs)VictoriaTelephone No.: 131126Poisons Information CentreSection 2: HAZARD IDENTIFICATIONHazard Classification according to criteria of Worksafe Australia.Risk Phrase(s) R20/21 Harmful by inhalation and contact with skin.R22 Harmful if swallowed.R33 Danger of cumulative effects.Safety Phrase(s) S13 Keep away from food, drink and animal feeding stuffs.S20/21 When using, do not eat, drink or smoke.Issued on 27/08/2009 Page 1 of 8

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 3: COMPOSITION / INFORMATION ON INGREDIENTSChemical Entity Proportion CAS NumberMETAL:TinLeadCopperSilver60 – 63%36 – 40%0 – 2%0 – 2%7440-31-57439-92-17440-50-87440-22-4FLUX:Rosin1 – 3%8050-09-7Section 4: FIRST AID MEASURESDescription of necessary measures according to route of exposure.Ingestion:Eye:Skin:Inhalation:Medical Attention and SpecialTreatment:Minor lead pick up possible via digestion. Give plenty of water to drink; seek medicaladvice if large object has been swallowed.Irrigate the affected eye(s) with water and seek medical advice to remove the foreignparticle if possible.If molten material comes in contact with the skin and adheres – cool quickly withrunning water – do not attempt to remove. The flux can be removed with soap andwater.If fume or dust is inhaled, remove victim to fresh air taking care not to become acasualty. Lay patient down and keep warm and rested. With excessive inhalation ofthe flux some individuals can show sensitivity.Treat symptomatically.Additional informationAggravated Medical ConditionsCaused by Exposure:Test for lead in blood if patient has had long term exposure, particularly todust or fume. Exposure to high levels of airborne or ingested lead mayproduce symptoms of anaemia, insomnia, weakness, constipation, nauseaand abdominal pain. Women of child bearing age should avoid exposure tolead due to post natal effects.Issued on 27/08/2009 Page 2 of 8

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 5: FIRE FIGHTING MEASURESExtinguishing Media:Hazardous Combustion Products:Dry Chemical Powder or Carbon Dioxide.Metal: Non Flammable.Resin: Can burn – if enough is extracted.Special Protective Equipment:Fire fighters should wear self contained breathing apparatus and protectiveclothing if exposed to products of decomposition.Additional informationAvoid contact with strong acids. Resistant to hydrofluoricIncompatibility: Avoid oxidising materials, acids and peroxides. Above 500ºClead fumes may be generated.HAZCHEM CODE:None AllocatedSection 6: ACCIDENTAL RELEASE MEASURESEmergency Procedures: Refer to protection measures listed in 7/8.Methods and Materials for Containment and Clean Up ProceduresSmall Spills / Leaks:Large Spills / Leaks:In molten state allow to solidify and cool. Break up and recycle as scrap.In molten state allow spill to solidify and cool. Take care not to introducewater to molten metal because of explosion risks. If necessary dam the spillarea to prevent entry of molten metal to drains. Scrap solder by-productscan be recycled by returning to supplier.For Personal Protective Equipment (PPE) - refer to Section 8 of this MSDS (if required)Issued on 27/08/2009 Page 3 of 8

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 7: HANDLING AND STORAGEPrecautions for Safe Handling:Good occupational practice should be followed when lifting or carrying lead.Always wear protective clothing and equipment when molten metal ispresent.Conditions for Safe Storage:Material stable. Storage and transport should not present a problem.Keep away from food and drink.Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTIONNational Exposure Standards – as regulated by:Worksafe AustraliaChemical Name ES – TWA ES - STEL ES – PeakMETAL:TinLeadSilver2.0 mg/m 30.15 mg/m 30.1 mg/m 3FLUX:Rosin 0.1 mg/m 3 **** ROSIN (colophony) – Natural gum has not been established as dangerous in some considerable time during whichit has been used. However because the material can be thermally degraded during use, variable decompositionproducts can be generated. For this reason a TWA value of 0.1mg/m 3 - expressed as formaldehyde has beenadopted.Biological Limit ValuesEngineering Controls:Personal Protective Equipment (PPE)Eye / Face Protection:Skin Protection:No data available.Adequate ventilation/extraction should be provided to keep exposure tobelow TWA values and to ensure operator comfort.Safety Glasses or full face mask.Leather gloves, safety boots and protective clothing should be worn. Washcontaminated clothing before storing or re-using. Always wash handsbefore eating, drinking, smoking or using the toilet.Respiratory Protection:An approved dust/fume respirator should be worn when TWA values maybe exceeded.Issued on 27/08/2009 Page 4 of 8

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 9: PHYSICAL AND CHEMICAL PROPERTIESAppearance:Colour:Odour:Vapour Pressure:Vapour Density:Boiling Point:Melting Point Range:Solubility in Water:Specific Gravity:Flash Point:pH:Silver/Grey SolidSilver/GreyNilN/AN/AN/A180-250ºCInsolubleComposition is variable, therefore none given.N/AN/AFor Flammable Limits (as a percentage volume in air)Lower Explosion Limit :N/AUpper Explosion Limit :N/AIgnition Temperature:N/ASpecific Heat Value :N/AParticle Size:N/AVolatile Organic Compounds (VOC) Content N/AEvaporation Rate :N/AViscosity :N/APercent Volatile :N/AOctanol/Water partition coefficient :N/ASaturated Vapour Concentration :N/AAdditional CharacteristicsN/AFlame Propagation/Burning Rate of Solid N/AMaterials :Properties of material that may initiate or N/Acontribute to fire intensity :Potential for Dust Explosion :NilReactions that Release Flammable Gases : NilFast or Intensely Burning Characteristics : N/ANon-Flammables that could contribute unusualhazards to a fire :NoneRelease of invisible flammable vapour andNilgases :Decomposition Temperature :N/AAdditional InformationMolecular Weight :Solubility :N/AInsolubleIssued on 27/08/2009 Page 5 of 8

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 10 : STABILITY AND REACTIVITYChemical Stability: Stable under the handling and storage conditions listed in section 7.Conditions to Avoid:Avoid contact with strong acids.Incompatible Materials:Avoid oxidising materials, acids and peroxides.Hazardous Decomposition Products: NoneHazardous Reactions:NoneSection 11 : TOXICOLOGICAL INFORMATIONToxicity Data:Ingestion:Eye:Skin:Inhaled:No data available.Extremely unlikely unless in the form of dust or fume. Lead is absorbed insmall amounts from the gastrointestinal tract, which may enter through theswallowing of inhaled particles.Unlikely route of entry. Lead dust or Lead particles may causeinflammation, soreness or scratches of the eye.Hot metal burns.Unlikely due to physical form, however dust or fumes are readily absorbedfrom the respiratory tract and may result in symptoms of poisoning.Section 12 : ECOLOGICAL INFORMATIONEcotoxicity:Persistence / Degradability:Mobility:Environmental Fate:Bioaccumulative Potential :The product has no effect on the environment unless in finely divided form.No data available.No data available.No data available.No data available.Issued on 27/08/2009 Page 6 of 8

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 13 : DISPOSAL CONSIDERATIONSDisposal Methods:Special Precautions for Landfill orIncineration:Scrap should be recycled by returning to supplier. Do not dispose to landfill.Do not discharge into drains or water courses. Dispose of in accordancewith all local, state and federal regulations at an approved waste disposalfacility.Not ApplicableThe Disposal Considerations mentioned above applies to the material / product described in this MSDS asmanufactured. Further processing, use, or contamination of the product may make the information inappropriate,inaccurate or incomplete.Section 14 : TRANSPORT INFORMATIONUN Number:UN Shipping Name:Dangerous Goods Class:Packing Group:Special Precautions / Requirement:HAZCHEM Code:Additional Information –Material for Export:None AllocatedN/ANone AllocatedNone AllocatedN/ANone AllocatedN/ASection 15 : REGULATORY INFORMATIONPoison Schedule Number:EPG:AICS Name:NZ Toxic Substance:None AllocatedNone AllocatedN/AN/AIssued on 27/08/2009 Page 7 of 8

Reference No. :Product Name :Consolidated AlloysA Division of C.A. Group Australasia Pty. Ltd.ABN 83 005 084 097 ACN 005 084 097M104-AResincore Solders-High GradeHead Office : 32 Industrial Avenue Thomastown, Victoria 3074AUSTRALIAMail : PO Box 199, Reservoir, Victoria 3073AUSTRALIATelephone : (03) 9359 5811Facsimile : (03) 9359 4076E-mail : info@cagroup.com.auMATERIAL SAFETY DATA SHEETSection 16 : OTHER INFORMATIONLast Revision: 12/12/2007THIS MATERIAL SAFETY DATA SHEET IS OFFERED SOLELY FOR YOUR INFORMATION, CONSIDERATIONAND INVESTIGATION. CONSOLIDATED ALLOYS PROVIDES NO WARRANTIES, EITHER EXPRESSED ORIMPLIED AND ASSUMES NO RESPONSIBILITY FOR THE ACCURACY OR COMPLETENESS OF THE DATACONTAINED HEREIN. MATERIAL USE IS BEYOND THE CONTROL OF SUPPLIER.------------------------- End of MSDS -------------------------Issued on 27/08/2009 Page 8 of 8