scope of accreditation to iso/iec 17025:2005 & ansi/ncsl z540-1 ...

More documents

Recommendations

Info

Parameter/Range Frequency CMC 2 () CommentsPhase Noise –Measure10 MHz to 1 GHz(2 to 18) GHz2.7 dBc/Hz3.0 dBc/HzHP 3048A phasenoise test setHP/Agilent 11848A,11729C, 3561A,3585A, HP 8663AFluke 9640A-LPN& HP 8340BIII. Time & FrequencyParameter/Equipment Range CMC 2 () CommentsFrequency –Measuring Equipment (1.0 to 26.5) GHz 5.0 parts in 10 12 Agilent 5071A (cesiumbeam), Agilent 8340Bsynthesized sweeperFrequency –Measure10 Hz to 40 GHz 1 Hz Agilent 5071A (cesiumbeam), HP 5352B-010________________________________1 This laboratory offers commercial calibration service.2 Calibration and Measurement Capability (CMC) is the smallest uncertainty of measurement that alaboratory can achieve within its scope of accreditation when performing more or less routinecalibrations of nearly ideal measurement standards or nearly ideal measuring equipment. Calibrationand Measurement Capabilities represent expanded uncertainties expressed at approximately the 95 %level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of aspecific calibration performed by the laboratory may be greater than the CMC due to the behavior ofthe customer’s device and to influences from the circumstances of the specific calibration.3Unless listed otherwise stated, all CMCs stated in percent are in percent of reading(A2LA Cert. No. 3104.01) 06/03/2013 Page 6 of 6
A2LA has accreditedINSTRUMENT RENTAL LABSBroomfield, COfor technical competence in the field ofCalibrationThis laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General Requirements forthe Competence of Testing and Calibration Laboratories. This laboratory also meets the requirements of ANSI/NCSLI Z540-1-1994 and therequirements of ANSI/NCSLI Z540.3-2006 and any additional program requirements in the field of calibration. This accreditationdemonstrates technical competence for a defined scope and the operation of a laboratory quality management system(refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009).Presented this 3 rd day of June 2013._______________________President & CEOFor the Accreditation CouncilCertificate Number 3104.01Valid to May 31, 2015For the calibrations to which this accreditation applies, please refer to the laboratory’s Calibration Scope of Accreditation.
Page 1 and 2: SCOPE OF ACCREDITATION TO ISO/IEC 1
Page 3 and 4: Parameter/Range Frequency CMC 2, 3
Page 5: Parameter/Range Frequency CMC 2 ()

scope of accreditation to iso/iec 17025:2005 & ansi/ncsl z540-1 ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?