G2ZMF11 24-240V Timers - Multifunction Technical data

More documents

Recommendations

Info

G2ZMF11 24-240VTechnical data9. AccuracyBase accuracy:±1% (of maximum scale value)using 1MΩ remote potentiometerFrequency response: -Adjustment accuracy: ≤5% (of maximum scale value)using 1MΩ remote potentiometerRepetition accuracy:
G2ZMF11 24-240VFunctionsSingle shot trailing edge with control contact (Wa11)The supply voltage U must be constantly applied to the device (greenLED illuminated). When the control contact Y1-Y2 is closed theinstantaneous contact switches into on-position. When the controlcontact is opened, the instantaneous contact switches into off-position,the delayed contact switches into on-position (yellow LED illuminated)and the set interval t begins (green LED flashes). After the interval thas expired (green LED illuminated), the delayed contact switches intooff-position (yellow LED not illuminated). During the interval, the controlcontact (and the instantaneous contact) can be operated any number oftimes.A further cycle can only be started when the cycle run has beencompleted.OFF delay with control contact (R20)The supply voltage U must be constantly applied to the device (greenLED illuminated). When the control contact Y1-Y2 is closed, the outputrelay R switches into on-position (yellow LED illuminated). If the controlcontact is opened, the set interval t begins (green LED flashes). After theinterval t has expired (green LED illuminated) the output relay switchesinto off-position (yellow LED not illuminated). If the control contactis closed again before the interval t has expired, the interval alreadyexpired is erased and is restarted with the next cycle.ULED UY1-Y2R 15-16-18R 25-26-28t
Page 1: Timers - MultifunctionG2ZMF11 24-24

G2ZMF11 24-240V Timers - Multifunction Technical data

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?