G2ZMF11 24-240V Timers - Multifunction Technical data

G2ZMF11 24-240VFunctionsConnectionsSingle shot trailing edge with control contact (Wa20)The supply voltage U must be constantly applied to the device (greenLED illuminated). Closing the control contact Y1-Y2 has no influence onthe condition of the output relay R. When the control contact is opened,the output relay switches into on-position (yellow LED illuminated) andthe set interval t begins (green LED flashes). After the interval t hasexpired (green LED illuminated), the output relay switches into offposition(yellow LED not illuminated). During the interval, the controlcontact can be operated any number of times. A further cycle can onlybe started when the cycle run has been completed.A1Z1SY1Y215213R2U1525LED UY1-Y216 1826 28R 15-16-18R 25-26-28t t25 26 2816 18 A2Flasher pulse first (Bi20)When the supply voltage U is applied, the output relay R switches intoon-position (yellow LED illuminated) and the set interval t begins (greenLED flashes). After the interval t has expired, the output relay switchesinto off-position (yellow LED not illuminated) and the set interval t beginsagain. The output relay is triggered at a ratio of 1:1 until the supplyvoltage is interrupted.DimensionsULED UR 15-16-18R 25-26-28t t t t tFlasher pause first (Bp20)When the supply voltage U is applied, the set interval t begins (greenLED flashes). After the interval t has expired, the output relay R switchesinto on-position (yellow LED illuminated) and the set interval t beginsagain. After the interval t has expired, the output relay switches into offposition(yellow LED not illuminated). The output relay is triggered at aratio of 1:1 until the supply voltage is interrupted.ULED UR 15-16-18R 25-26-28t t t t tRELEASE 2012/05Subject to alterations and errorswww.tele-online.com