User manual - Televes -> H45 : Advanced HDTV System Analyzers

More documents

Recommendations

Info

3.3.3.2.2.1.- ATSCBy selecting this function, the meter will analyse the ATSC signal. The available measurementsfor an ATSC signal are the following: Power, C/N, SNR and BER.- ATSC Measures -Pressing the Clear key will bring up the options menu that corresponds to this modulation.3.3.3.2.2.1.1.- ParametersSelecting this option will bring up a display menu. The parameter which can be changed forthis modulation is the bandwidth.To do so press ENTER over the bandwidth parameter and we can scroll through the possibleoptions using the rotary selector. Confirm the option using the OK key.This parameter has the following possibilities:AUTO: The bandwidth is selected according to the channel plan.7 MHz: 7 MHz channels8MHz: 8MHz channels3.3.3.2.2.1.2.- BERThis function enables you to return to the BER measures window from another window.TV Mode 88
3.3.3.2.2.1.3.- MPEGIf the meter has an ATSC signal, pressing this key will take us to the MPEG channel viewingfunction. When we access this function the messages “Initiating MPEG”, “MPEG tuning” and“Looking for services” will appear.Using the OK key, shows the lists of available services. To select the desired service, scrollthrough the list with the rotary selector and press the OK key. If the service has more than oneaudio, the option to select the required audio will appear.This function has the option of three information Windows. One window showing limitedinformation and two windows with extended information. To switch between each window,press quick-selection key 1.The limited information window provides information about the selected channel (channel orfrequency) depending on the mode of the meter, the name of the selected service (serviceidentifier) and the SNR measurement, which is the main measurement for this modulation.By using the (Up/down) cursors on the screen, we can select one of these parameters andmodify it using the cursors(left/right), to change the measurement shown or the service forexample.As well as the previous data, the extended information window also shows the NETWORKidentification, the number of services and the following MPEG data:SID: Service IdentifierVPID: Video Payload IdentifierNID: Network IdentificationAPID: Audio Payload IdentifierInformation on the type of MPEG can be seen on the lower part of the screen, for both the audioand the video (MPEG type, video resolution, language identifier).Pressing key 1 again, changes the information and the binary regime for the video and the audioappears.In the event of not receiving a valid ATSC signal, the message UNLOCK will appear.TV Mode 89
Page 4:
3.3.1.6.4.2.- EDIT NAME . . . . . .
Page 7 and 8:
1.- INSTALLATION1.1.- SAFETY RECOMM
Page 9 and 10:
To restart the process, press the s
Page 11 and 12:
Recommendations on battery charge:=
Page 13 and 14:
Reference 5993MeasuresMERQAMPower40
Page 15 and 16:
Reference 5993Accessories includedC
Page 17 and 18:
2520262127 2228232924- Numerical ke
Page 19 and 20:
(Load): Indicates if the equipment
Page 21 and 22:
(24) KeySHORT PRESS:GENERAL: Open M
Page 23 and 24:
At the top we have the following it
Page 25 and 26:
3.- PRODUCT HANDLING3.1.- THE MENUA
Page 27 and 28:
MENUMEASURESCONFIGEQUIPMENTCONFIGTV
Page 29:
(50 KHz variations). If we once aga
Page 32 and 33:
Terrestrial band- Preamplifiers pow
Page 34 and 35:
of four, identifying each group of
Page 36 and 37:
3.3.1.2.5.- SCREl H45 is capable of
Page 38 and 39: 3.3.1.3.- Channels and Standards3.3
Page 40 and 41: If we select Nicam, the NICAM mode
Page 42 and 43: - PreAmpThis enables the configurat
Page 44 and 45: 3.3.1.6.- LOGGER MemoriesWithin thi
Page 46 and 47: - Recording a memory -Once the savi
Page 48 and 49: 3.3.1.6.1.4.- Editing memory nameWi
Page 50 and 51: If we have Macromeasures on the met
Page 52 and 53: - Executing a Macromeasure -3.3.1.6
Page 54 and 55: 3.3.1.6.3.- DATALOGSIn this section
Page 56 and 57: we can move through the list of cha
Page 58 and 59: To cancel the search, we press the
Page 60 and 61: While we are reviewing the graphs,
Page 62 and 63: - SD Log Files-The default name for
Page 64 and 65: 3.3.1.7.- Positioning antennasWhen
Page 66 and 67: 3.3.2.3.- Energy Options3.3.2.3.1.-
Page 68 and 69: 3.3.2.4.- Monitor parametersThis gr
Page 70 and 71: 3.3.2.7.- ClockThe following window
Page 72 and 73: Scart as output (right column):Vide
Page 74 and 75: - Battery change information window
Page 76 and 77: 3.3.3.- Television ModeWhen this me
Page 78 and 79: Parameter description is as follows
Page 80 and 81: The key is a quick key that we can
Page 82 and 83: 3.3.3.2.1.- AnalogsThe respective s
Page 84 and 85: 3.3.3.2.1.2- V/A (only terrestrial
Page 86 and 87: 3.3.3.2.1.4.1.- Line C/N lineThis f
Page 90 and 91: 3.3.3.2.2.1.4.- UNCORRECTED PACKETS
Page 92 and 93: 3.3.3.2.2.2.2.- BERThis function en
Page 94 and 95: 3.3.3.2.2.3.- DVB-S / DSSThis funct
Page 96 and 97: This option has three different inf
Page 98 and 99: 3.3.3.2.2.4.2- BERThis function ena
Page 100 and 101: - Parameter Options -3.3.3.2.2.5.2.
Page 102 and 103: 3.3.3.2.2.5.5.- UNCORRECTED PACKETS
Page 104 and 105: 3.3.4.- AnalyzerIf this menu is cho
Page 106 and 107: - Mode AUTO -When this function is
Page 108 and 109: 3.3.4.2.- SpanUsing this function o
Page 110 and 111: 3.3.4.3.1.2.- V/AWhen you select th
Page 112 and 113: 3.3.4.3.2.- Digital MeasuresOn sele
Page 114 and 115: One can access this function by pre
Page 116 and 117: 3.3.4.3.3.- Satellite Indentificati
Page 118 and 119: 3.3.4.4.4.- Search for PeaksThis op
Page 120 and 121: 3.3.4.6.- dB / DIVWith this paramet
Page 122 and 123: 3.3.4.7.5.- Trigger ModeWith this f
Page 124 and 125: · SHORT CIRCUIT:This error appears
Page 126 and 127: 4.3.- SCART (DIN EN 50049)201816141
Page 128 and 129: => To remove the battery altogether
Page 130 and 131: 130
Page 132 and 133: 132
Page 134: 134
show all

User manual - Televes -> H45 : Advanced HDTV System Analyzers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?